BD2326 Triple Band 2-Way SMT Power Divider 1900~2500MHz PCS, WCDMA & TD-SCDMA, WiBro Device Features Typical Isolation = 20.0 dB Typical Insertion Loss = 0.6 dB MSL 3 moisture rating Small Size and Low Profile Lead-free/RoHS-compliant SOT-26 Plastic Package BD23XX(XX=Wafer number) Product Description Typical Performance1 BeRex’s Divider BD2326 is designed for PCS, WCDMA & TD-SCDMA and WiBro band with low Insertion Loss and Isolation. This chip is fully passivated for enhanced performance and reliability and packaged in RoHScompliant with SOT-26 surface mount package. Parameter Min Frequency Range Insertion Loss Typical Max Unit 0.65 2500 0.9 MHz dB 1900 Isolation 15 20 dB IRL(S11) -15 -10 dBm ORL(S22/S33) Amplitude Balance Phase Balance -22 0.06 0.8 -18 0.2 1.0 dBm dB deg *All specifications apply to the following test conditions, 1. Device performance _ measured on BeRex E/B at 25°C, 50ohm system. 2. Insertion Loss: Above 3.0dB. Applications Absolute Maximum Ratings Base station Infrastructure Commercial/Industrial/Military wireless system Parameter Input Power Storage Temperature Operating Temperature Rating 1W CW dBm -55 to +155°C -40 to +85°C Operation of this device above any of these parameters may result in permanent damage. Evaluation Board Drawing Function Block Diagram Pins 2,4 and 6 must be DC and RF grounded. BeRex ●website: www.berex.com ●email: [email protected] 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BD2326 Triple Band 2-Way SMT Power Divider 1900~2500MHz PCS, WCDMA & TD-SCDMA, WiBro Typical Test Data BeRex Parameters Unit WCDMA & TD-SCDMA WiBro Frequency Range MHz 1900 2075 2250 2200 2350 2500 Insertion Loss dB 0.58 0.59 0.64 0.62 0.69 0.77 Isolation dB 23.33 27.55 23.28 24.47 19.58 15.03 IRL(S11) dB 17.93 17.05 14.94 15.89 13.83 12.10 ORL(S22,S33) dB 21.92 23.04 22.90 22.81 22.00 20.09 Phase Diff. deg 0.69 0.76 0.60 0.84 0.56 0.62 Amplitude Balance dB 0.03 0.04 0.06 0.05 0.06 0.09 Insertion Loss vs. Frequency Isolation vs. Frequency IRL vs. Frequency ORL vs. Frequency ●website: www.berex.com ●email: [email protected] 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BD2326 Triple Band 2-Way SMT Power Divider 1900~2500MHz PCS, WCDMA & TD-SCDMA, WiBro Package Outline Drawing Suggested PCB Land Pattern and PAD Layout PCB Land Pattern PCB Mounting Ø0.8 2.3 0.4 0.9 0.65 2.2 Ø0.8 Note : All dimension _ millimeters PCB lay out _ on BeRex website BeRex ●website: www.berex.com ●email: [email protected] 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BD2326 Triple Band 2-Way SMT Power Divider 1900~2500MHz PCS, WCDMA & TD-SCDMA, WiBro Package Marking XX = Wafer No. Tape & Reel SOT-26 Packaging information: Tape Width (mm): 8 Reel Size (inches): 7 Device Cavity Pitch (mm): 4 Devices Per Reel: 3000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating MSL Rating: Level 3 at +265°C convection reflow Standard: JEDEC Standard J-STD-020 NATO CAGE code: 2 BeRex N 9 6 F ●website: www.berex.com ●email: [email protected] 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D