BT331 700-2700 MHz 1.5~2.0W Power Amplifier Device Features Preliminary Datasheet OIP3 = 51.0 dBm @ 1900 MHz Gain = 19.5 dB @ 900 MHz Output P1 dB = 33.3 dBm @ 1900 MHz 50 Ω Cascadable Highly Reliable InGaP/GaAs HBT Technology Lead-free/RoHS-compliant SOIC-8 SMT package YY = Year, WW = Work week, XX = Wafer Number Typical Performance1 Product Description BeRex’s BT331 is a high power and a high dynamic range amplifier in a low cost surface mount package(SOIC-8) with a RoHScompliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices fabricated with InGaP GaAs technology. This device is designed for use where high linearity is required and features high OIP3 and Power with low consumption current (400mA) and requires a few external matching components such as a DC blocking capacitors on the In/Output pin, a bypass capacitor and a RF choke for the out port. All devices are 100% RF/DC tested. Frequency Unit 900 1900 2140 2450 2600 Gain 19.5 14 13 12 S11 -16 -14 -15 -20 S22 -11 OIP3 50 2 -11 51 -12 -10 51 MHz 12.1 3500 10.7 -19 -20.4 dB -12.7 -13.0 dB 47 45.8 dBm dBm 50 dB P1dB 31.5 33.3 32.3 31 31.2 29.5 IS-95C ACPR 23.3 - - - - - dBm - 23.3 23.4 21.5 21.5 20.1 dBm 4.8 5 5 5.3 5.4 6.2 dB WCDMA ACLR Noise Figure 1 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. OIP3 _ measured with two tones at an output of 20 dBm per tone separated by 1 MHz. 2 *ACPR CH Power is measured at 55dBc, ACLR CH Power _ measured at 50dBc. *ACPR Test set-up: IS-95 CDMA, 9Ch. FWD, +885KHz offset, PAR 9.7dB at 0.01% Prob. *ACLR Test set-up: 3GPP WCDMA, TM1+64DPCH, +5MHz offset, PAR 10.34 at 0.01% Prob. Applications Min. Base station Infrastructure/RFID Commercial/Industrial/Military wireless system Application Circuits Bandwidth IC @ (Vc = 5V) VC RTH Vcc RF In RF Out BT331 DC Block DC Block *external matching circuit: refer to the page 4 to 16. 410 5.0 10.0 Max. Unit 2700 440 MHz mA V °C/W Absolute Maximum Ratings Bypass RF Choke Typical 700 360 Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Rating -40 to +85 -55 to +155 +220 Unit °C °C °C +5.5 900 28 V mA dBm *Operation of this device above any of these parameters may result in permanent damage. BeRex ●website: www.berex.com ● email: [email protected] 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet V-I Characteristics BeRex BeRex SOIC-8 Evaluation Board *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=400mA, T=25°C) ●website: www.berex.com ● email: [email protected] 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 1.5~2.0W Power Amplifier S-Parameter Preliminary Datasheet (Vdevice = 5.0V, Icc = 400mA, T = 25 °C, calibrated to device leads) BeRex Freq [MHz] S11 [Mag] S11 [Ang] S21 [Mag] S21 [Ang] S12 [Mag] S12 [Ang] S22 [Mag] S22 [Ang] 100 500 1000 1500 2000 2500 3000 3500 0.919 0.949 0.941 0.929 0.895 0.847 0.735 0.757 -155.332 168.743 156.029 143.815 131.767 120.721 118.042 125.918 27.202 4.153 2.065 1.444 1.226 1.393 2.132 2.326 171.888 90.122 78.875 71.101 65.133 57.189 32.334 -38.115 0.011 0.010 0.011 0.016 0.019 0.024 0.024 0.007 81.778 35.600 47.384 48.347 50.235 47.782 2.709 -11.874 0.335 0.805 0.833 0.840 0.838 0.839 0.848 0.904 151.426 -179.714 170.693 163.704 158.159 153.001 147.516 140.189 4000 0.910 122.065 0.796 -127.288 0.014 66.759 0.495 79.167 ●website: www.berex.com ● email: [email protected] 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 900 MHz Preliminary Datasheet Schematic Diagram R1 C7 Vcc C6 C9 R2 C3 C4 C5 C8 C1 C10 RF_IN L2 C11 1 8 2 7 3 6 4 5 Tolerance BOM L1 RF_OUT C2 C12 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 L1 L2 R1 R2 PCB Diagram 0603 0603 0603 0603 0603 1206 0603 0603 0603 0603 1008 0603 0603 0603 100pF 100pF 100pF 1nF 1uF 10uF NC NC 1pF 3.3pF 10pF 8pF 18nH 8.2nH 4.3KΩ 100Ω ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% Notice 1. 2. 3. 4. 5. PCB: 31mil thick FR4 Distance between the center of the shunt Inductor(L2) and the input pin of BT331 _ 6.45 mm. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 8.25 mm. ※ BT331 with both input and output ports opened simultaneously may cause instability. Please See an application note or contact company for application support. BeRex ●website: www.berex.com ● email: [email protected] 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 1900 MHz Preliminary Datasheet Schematic Diagram R1 C7 Vcc C6 C9 R2 C3 C4 C5 C8 C1 C10 RF_IN C13 C11 1 8 2 7 3 6 4 5 L1 RF_OUT C2 C12 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 L1 R1 R2 PCB Diagram 1. 2. 3. 5. ●website: www.berex.com 0603 0603 0603 0603 0603 1206 0603 0603 0603 0603 0603 0603 1008 0603 0603 100pF 100pF 100pF 1nF 1uF 10uF NC 2pF 10pF 3pF 0.5pF 2.7pF 2.5pF 56nH 4.3KΩ 100Ω ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% Notice 4. BeRex Tolerance BOM PCB: 31mil thick FR4 Distance between the center of the shunt cap.(C13) and the input pin of BT331 _ 5.25 mm. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 2.25 mm. ● email: [email protected] 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 2140 MHz Preliminary Datasheet Schematic Diagram R1 C7 Vcc C6 C9 R2 C3 C4 C5 C8 C1 C10 RF_IN C13 C11 1 8 2 7 3 6 4 5 L1 RF_OUT C2 C12 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 L1 R1 R2 PCB Diagram 1. 2. 3. 5. ●website: www.berex.com 0603 0603 0603 0603 0603 1206 0603 0603 0603 0603 0603 1008 0603 0603 100pF 100pF 100pF 1nF 1uF 10uF NC 5pF NC 1.8pF 0.5pF 2pF 2pF 22nH 5.6KΩ 100Ω ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% Notice 4. BeRex Tolerance BOM PCB: 31mil thick FR4 Distance between the center of the shunt cap.(C13) and the input pin of BT331 _ 5.25 mm. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 2.25 mm. ● email: [email protected] 10 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 11 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 12 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 2450 MHz Preliminary Datasheet Schematic Diagram R1 C7 Vcc C6 C9 R2 C3 C4 C5 C8 C1 C10 RF_IN C13 C11 1 8 2 7 3 6 4 5 L1 RF_OUT C2 C12 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 L1 R1 R2 PCB Diagram 1. 2. 3. 5. ●website: www.berex.com 0603 0603 0603 0603 0603 1206 0603 0603 0603 0603 1008 0603 0603 100pF 100pF 100pF 1nF 1uF 10uF NC NC NC 1pF 0.5pF 1.8pF 1pF 5.7nH 5.6KΩ 100Ω ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% Notice 4. BeRex Tolerance BOM PCB: 31mil thick FR4 Distance between the center of the shunt cap.(C13) and the input pin of BT331 _ 6.0 mm. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 2.5 mm. ● email: [email protected] 13 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 14 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 15 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Application Circuit: 2600 MHz Preliminary Datasheet Schematic Diagram R1 C7 Vcc C6 C9 R2 C3 C4 C5 C8 C1 C10 RF_IN C13 C11 1 8 2 7 3 6 4 5 L1 RF_OUT C2 C12 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 L1 R1 R2 PCB Diagram 1. 2. 3. 5. ●website: www.berex.com 0603 0603 0603 0603 0603 1206 0603 0603 0603 0603 0603 0603 1008 0603 0603 100pF 100pF 100pF 1nF 1uF 10uF NC 5pF 2.5pF 1pF 0.5pF 1.8pF 1pF 5.7nH 5.6KΩ 100Ω ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% Notice 4. BeRex Tolerance BOM PCB: 31mil thick FR4 Distance between the center of the shunt cap.(C13) and the input pin of BT331 _ 5.25 mm. Distance between the center of the series cap.(C10) and the input pin of BT331 _ 2.8mm. Distance between the center of the shunt cap.(C11) and the input pin of BT331 _ 1.5 mm. Distance between the center of the shunt cap.(C12) and the output pin of BT331 _ 1.5 mm. ● email: [email protected] 16 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 17 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 18 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Preliminary Datasheet Package Outline Dimension BeRex ●website: www.berex.com ● email: [email protected] 19 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Suggested PCB Land Pattern and PAD Layout Preliminary Datasheet PCB Land Pattern PCB Mounting Note : All dimension are in millimeters PCB lay out _ on BeRex website Package Marking YY = Year, WW = Working Week, XX = Wafer No. Tape & Reel Packaging information: SOIC8 SOIC8-Part orientation Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 Direction of feed BeRex Devices Per Reel: 1000 ●website: www.berex.com ● email: [email protected] 20 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BT331 700-2700 MHz 1.5~2.0W Power Amplifier Lead plating finish 100% Tin Matte finish Preliminary Datasheet (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Class 2 Value: Passes <4000V Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114B MSL Rating: Level 3 at +265°C convection reflow Standard: JEDEC Standard J-STD-020 NATO CAGE code: BeRex 2 N 9 6 F ●website: www.berex.com ● email: [email protected] 21 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E