Type PVC Polyester and Polypropylene Film/Foil Capacitors Polyester Film/Foil (100 V– 1000 V) and Polypropylene Film/Foil (1200 V - 2000 V) t The Type PVC is a sturdy film and extended foil construction ideal for bypass and coupling applications. Extended foil construction is as good as it gets for low DF and high current applications. The PVC is encapsulated in a rugged, flame retardant, epoxy coating with the leads crimped to provide secure seating on printed circuit boards. ♦ ♦ ♦ ♦ ♦ ♦ ♦ re Specifications RoHS Compliant Rugged epoxy case material meets UL94V0 Film/foil polyester 100 – 1000 Vdc Film/foil polypropylene - 1200 Vdc to 2000 Vdc Non-inductively wound Non-polar Crimped leads for secure PC board insertion Lead material: tinned copper clad steel pl ac ♦ em en Highlights Capacitance Range: Capacitance Tolerance: Voltage Range: O b Se so e le 41 te 8P or 71 5P as 0.001 µF to 1.0 µF ±10% Polyester: 100 Vdc to 1000 Vdc (70 Vac – 200 Vac 50/60 Hz) Polypropylene: 1200 Vdc to 2000 Vdc (475 Vac – 500 Vac 50/60 Hz) Operating Temperature Range: Polyester: –55 ºC to +125 ºC Polypropylene: –55 ºC to +105 ºC (Full rated voltage up to 85 ºC. Derate linearly to 50% rated voltage at max temperature) Insulation Resistance (IR): Polyester: 100,000 MΩ for ≤ 0.25 µF, 25,000 MΩ • µF for ≥ 0.25 µF Polypropylene: 400,000 MΩ for ≤ 0.50 µF, 200,000 MΩ • µF for ≥ 0.50 µF After 2 minutes at rated voltage or 500V whichever is less. +25 ºC 0.75% max for <1200 V, 0.1% max for ≥1200 V. +25 ºC Dissipation Factor (DF): 250% rated voltage for <1000 V, 200% rated voltage for ≥1000 V. 5 secDielectric Withstand Voltage: onds, +25 ºC 500 hours at +85 ºC, 1.5 times rated DC voltage Life Test: Complies with the EU Directive 2002/95/ EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type PVC Polyester and Polypropylene Film/Foil Capacitors Outline Drawing Ratings Inches em en t Lead Pull Test Capacitor leads shall withstand a steady pull of 5 pounds applied radially to the capacitor body for 1 minute. Lead Blend Test Capacitor leads shall be bent without breakage below the lead crimp, first 90º in one direction then back to the original position and then 90º in the opposite direction. Millimeters Catalog Cap L Dia S L Dia Part Number (µF) Max Max Lead Spacing Max Max PVC1118 0.018 0.7 0.33 0.500 0.032 17.8 8.4 PVC1122 0.022 0.7 0.35 0.500 0.032 17.8 PVC1127 0.027 0.7 PVC1133 0.033 0.7 0.35 0.500 0.032 0.35 0.500 0.032 PVC114 0.040 0.7 0.35 0.500 PVC1147 PVC1156 0.047 0.7 0.35 0.056 0.7 0.38 PVC1168 0.068 0.7 ∅d S Lead Spacing ∅d 12.7 0.8 8.9 12.7 0.8 17.8 8.9 12.7 0.8 17.8 8.9 12.7 0.8 0.032 17.8 8.9 12.7 0.8 0.500 0.032 17.8 8.9 12.7 0.8 0.500 0.032 17.8 9.7 12.7 0.8 0.38 0.500 0.032 17.8 9.7 12.7 0.8 0.032 22.9 10.2 17.5 0.8 0.032 22.9 10.2 17.5 0.8 as re pl ac 100 Vdc / 70 Vac 0.082 0.9 0.40 0.688 0.10 0.9 0.40 0.688 PVC1015 0.15 0.9 0.45 0.688 0.032 22.9 11.4 17.5 0.8 PVC1022 0.22 1.2 0.45 0.969 0.032 30.5 11.4 24.6 0.8 PVC1025 0.25 1.2 0.50 0.969 0.032 30.5 12.7 24.6 0.8 PVC1033 0.33 1.2 0.50 0.969 0.032 30.5 12.7 24.6 0.8 PVC1039 0.39 1.6 0.50 1.344 0.032 40.6 12.7 34.1 0.8 PVC1047 0.47 1.6 0.50 1.344 0.032 40.6 12.7 34.1 0.8 PVC105 0.50 1.6 0.60 1.344 0.032 40.6 15.2 34.1 0.8 PVC1056 0.56 1.6 0.60 1.344 0.032 40.6 15.2 34.1 0.8 PVC1068 0.68 1.6 0.60 1.344 0.032 40.6 15.2 34.1 0.8 PVC1082 0.82 1.6 0.65 1.344 0.032 40.6 16.5 34.1 0.8 PVC11 1.00 1.6 0.70 1.344 0.032 40.6 17.8 34.1 0.8 PVC211 0.010 0.7 0.33 0.500 0.032 17.8 8.4 12.7 0.8 PVC2115 0.015 0.7 0.33 0.500 0.032 17.8 8.4 12.7 0.8 PVC2118 0.018 0.7 0.33 0.500 0.032 17.8 8.4 12.7 0.8 PVC212 0.020 0.7 0.33 0.500 0.032 17.8 8.4 12.7 0.8 PVC2122 0.022 0.7 0.33 0.500 0.032 17.8 8.4 12.7 0.8 PVC2133 0.033 0.9 0.38 0.688 0.032 22.9 9.7 17.5 0.8 PVC2139 0.039 0.9 0.38 0.688 0.032 22.9 9.7 17.5 0.8 PVC214 0.040 0.9 0.38 0.688 0.032 22.9 9.7 17.5 0.8 PVC2147 0.047 0.9 0.38 0.688 0.032 22.9 9.7 17.5 0.8 PVC215 0.050 0.9 0.38 0.688 0.032 22.9 9.7 17.5 0.8 PVC2156 0.056 1.2 0.38 0.969 0.032 30.5 9.7 24.6 0.8 O b Se so e le 41 te 8P or 71 5P PVC1182 PVC101 200 Vdc / 140 Vac CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type PVC Polyester and Polypropylene Film/Foil Capacitors RoHS Compliant Inches Millimeters Catalog Cap L Dia S Part Number (µF) Max Max Lead Spacing ∅d L Dia S Max Max Lead Spacing ∅d 0.068 1.2 0.38 0.969 0.032 30.5 9.7 24.6 0.8 PVC2182 0.082 1.2 0.40 0.969 0.032 30.5 10.2 24.6 0.8 PVC201 0.10 1.2 0.40 0.969 0.032 30.5 10.2 24.6 0.8 PVC2015 0.15 1.2 0.45 0.969 0.032 30.5 11.4 24.6 0.8 PVC2022 0.22 1.2 0.50 0.969 0.032 30.5 12.7 24.6 0.8 PVC2025 0.25 1.2 0.50 0.969 0.032 30.5 12.7 PVC2027 0.27 1.6 0.47 1.344 0.032 40.6 11.9 PVC2033 0.33 1.6 0.47 1.344 0.032 40.6 11.9 PVC2047 0.47 1.6 0.56 1.344 0.032 40.6 14.2 PVC205 0.50 1.6 0.56 1.344 0.032 40.6 14.2 PVC421 0.0010 0.7 0.30 0.500 0.032 17.8 7.6 PVC4222 0.0022 0.7 0.30 0.500 0.032 17.8 PVC4233 0.0033 0.7 0.30 0.500 0.032 17.8 PVC4247 0.0047 0.7 0.30 0.500 0.032 17.8 PVC4268 0.0068 0.7 0.33 0.500 0.032 17.8 PVC411 0.010 0.7 0.35 0.500 0.032 PVC412 0.020 0.9 0.39 0.688 0.032 PVC4133 0.033 0.9 0.40 0.688 0.032 PVC4147 0.047 1.2 0.40 0.969 400 Vdc / 200 Vac 1.2 0.45 0.969 1.2 0.45 0.969 PVC4168 0.068 1.2 0.45 0.969 PVC4182 0.082 1.2 0.52 0.969 PVC401 0.10 1.2 0.53 0.969 PVC4015 0.15 1.2 0.57 0.969 PVC4018 0.18 1.6 0.60 PVC4022 0.22 1.6 0.60 PVC4025 0.25 1.6 PVC4033 0.33 PVC4039 0.39 PVC4047 24.6 0.8 34.1 0.8 34.1 0.8 34.1 0.8 34.1 0.8 0.8 12.7 0.8 7.6 12.7 0.8 7.6 12.7 0.8 8.4 12.7 0.8 8.9 12.7 0.8 22.9 9.9 17.5 0.8 22.9 10.2 17.5 0.8 10.2 24.6 0.8 re pl ac 12.7 7.6 17.8 as 0.050 0.056 30.5 0.032 30.5 11.4 24.6 0.8 0.032 30.5 11.4 24.6 0.8 0.032 30.5 11.4 24.6 0.8 0.032 30.5 13.2 24.6 0.8 0.032 30.5 13.5 24.6 0.8 0.032 30.5 14.5 24.6 0.8 1.344 0.032 40.6 15.2 34.1 0.8 1.344 0.032 40.6 15.2 34.1 0.8 0.65 1.344 0.032 40.6 16.5 34.1 0.8 1.6 0.65 1.344 0.032 40.6 16.5 34.1 0.8 1.6 0.72 1.344 0.032 40.6 18.3 34.1 0.8 0.47 1.6 0.80 1.344 0.032 40.6 20.3 34.1 0.8 PVC621 0.0010 0.7 0.30 0.500 0.032 17.8 7.6 12.7 0.8 PVC6212 0.0012 0.7 0.33 0.500 0.032 17.8 8.4 12.7 0.8 PVC6215 0.0015 0.7 0.33 0.500 0.032 17.8 8.4 12.7 0.8 PVC6218 0.0018 0.7 0.33 0.500 0.032 17.8 8.4 12.7 0.8 PVC622 0.0020 0.7 0.33 0.500 0.032 17.8 8.4 12.7 0.8 PVC6222 0.0022 0.7 0.33 0.500 0.032 17.8 8.4 12.7 0.8 PVC6225 0.0025 0.7 0.34 0.500 0.032 17.8 8.6 12.7 0.8 PVC6227 0.0027 0.7 0.35 0.500 0.032 17.8 8.9 12.7 0.8 PVC623 0.0030 0.7 0.35 0.500 0.032 17.8 8.9 12.7 0.8 PVC6233 0.0033 0.7 0.35 0.500 0.032 17.8 8.9 12.7 0.8 PVC6239 0.0039 0.7 0.38 0.500 0.032 17.8 9.7 12.7 0.8 PVC624 0.0040 0.7 0.38 0.500 0.032 17.8 9.7 12.7 0.8 PVC6247 0.0047 0.7 0.38 0.500 0.032 17.8 9.7 12.7 0.8 PVC625 0.0050 0.7 0.38 0.500 0.032 17.8 9.7 12.7 0.8 PVC6256 0.0056 0.7 0.40 0.500 0.032 17.8 10.2 12.7 0.8 O b Se so e le 41 te 8P or 71 5P PVC415 PVC4156 0.032 em en PVC2168 t 200 Vdc / 140 Vac 600 Vdc / 200 Vac CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type PVC Polyester and Polypropylene Film/Foil Capacitors RoHS Compliant Inches Millimeters Catalog Cap L Dia S Part Number (µF) Max Max Lead Spacing L Dia S Max Max Lead Spacing ∅d PVC626 0.0060 0.7 0.40 0.500 0.032 17.8 10.2 12.7 0.8 PVC6268 0.0068 0.7 0.40 PVC6275 0.0075 0.7 0.40 0.500 0.032 17.8 10.2 12.7 0.8 0.500 0.032 17.8 10.2 12.7 0.8 PVC628 0.0080 0.9 PVC6282 0.0082 0.9 0.40 0.688 0.032 22.9 10.2 17.5 0.8 0.40 0.688 0.032 22.9 10.2 17.5 PVC611 0.010 0.9 0.8 0.40 0.688 0.032 22.9 10.2 17.5 0.8 ∅d 0.012 0.9 0.40 0.688 0.032 22.9 10.2 0.015 0.9 0.40 0.688 0.032 22.9 10.2 PVC6118 0.018 0.9 0.45 0.688 0.032 22.9 11.4 PVC612 0.020 0.9 0.45 0.688 0.032 22.9 11.4 0.022 0.9 0.45 0.688 0.032 22.9 0.025 0.9 0.45 0.688 0.032 22.9 PVC6127 0.027 1.2 0.45 0.969 0.032 30.5 PVC613 0.030 1.2 0.45 0.969 0.032 30.5 0.033 1.2 0.45 0.969 0.032 30.5 0.039 1.2 0.56 0.969 0.032 30.5 0.040 1.2 0.56 0.969 0.032 0.047 1.2 0.56 0.969 0.032 PVC615 0.050 1.2 0.56 0.969 PVC6156 0.056 1.2 0.60 0.969 PVC6168 0.068 1.2 0.60 0.969 0.032 0.8 0.8 17.5 0.8 17.5 0.8 17.5 0.8 17.5 0.8 11.4 24.6 0.8 11.4 24.6 0.8 11.4 24.6 0.8 14.2 24.6 0.8 30.5 14.2 24.6 0.8 30.5 14.2 24.6 0.8 14.2 24.6 0.8 as PVC614 PVC6147 11.4 re PVC6133 PVC6139 11.4 17.5 17.5 pl ac PVC6122 PVC6125 em en PVC6112 PVC6115 30.5 0.032 30.5 15.2 24.6 0.8 0.032 30.5 15.2 24.6 0.8 0.082 1.2 0.65 0.969 0.032 30.5 16.5 24.6 0.8 0.10 1.2 0.65 0.969 0.032 30.5 16.5 24.6 0.8 PVC6012 0.12 1.6 0.70 1.344 0.032 40.6 17.8 34.1 0.8 PVC6015 0.15 1.6 0.70 1.344 0.032 40.6 17.8 34.1 0.8 PVC6018 0.18 1.6 0.80 1.344 0.032 40.6 20.3 34.1 0.8 PVC602 0.20 1.6 0.80 1.344 0.032 40.6 20.3 34.1 0.8 PVC6022 0.22 1.6 0.80 1.344 0.032 40.6 20.3 34.1 0.8 PVC6025 0.25 1.6 0.80 1.344 0.032 40.6 20.3 34.1 0.8 PVC6033 0.33 1.81 0.89 1.531 0.032 46.0 22.6 38.9 0.8 PVC1021 0.0010 0.7 0.33 0.500 0.032 17.8 8.4 12.7 0.8 PVC10215 0.0015 0.7 0.33 0.500 0.032 17.8 8.4 12.7 0.8 PVC10218 0.0018 0.7 0.35 0.500 0.032 17.8 8.9 12.7 0.8 PVC10222 0.0022 0.7 0.35 0.500 0.032 17.8 8.9 12.7 0.8 PVC10233 0.0033 0.9 0.35 0.688 0.032 22.9 8.9 17.5 0.8 PVC10247 0.0047 0.9 0.40 0.688 0.032 22.9 10.2 17.5 0.8 PVC10256 0.0056 0.9 0.43 0.688 0.032 22.9 10.9 17.5 0.8 PVC10268 0.0068 0.9 0.43 0.688 0.032 22.9 10.9 17.5 0.8 PVC10282 0.0082 0.9 0.48 0.688 0.032 22.9 12.2 17.5 0.8 PVC1011 0.010 0.9 0.48 0.688 0.032 22.9 12.2 17.5 0.8 71 5P PVC6182 PVC601 O b Se so e le 41 te 8P or t 600 Vdc / 200 Vac 1000 Vdc / 200 Vac PVC10115 0.015 1.2 0.48 0.969 0.032 30.5 12.2 24.6 0.8 PVC10118 0.018 1.2 0.58 0.969 0.032 30.5 14.7 24.6 0.8 PVC10122 0.022 1.2 0.58 0.969 0.032 30.5 14.7 24.6 0.8 PVC10127 0.027 1.2 0.65 0.969 0.032 30.5 16.5 24.6 0.8 PVC10133 0.033 1.2 0.65 0.969 0.032 30.5 16.5 24.6 0.8 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type PVC Polyester and Polypropylene Film/Foil Capacitors RoHS Compliant Inches Millimeters Catalog Cap L Dia S Part Number (µF) Max Max Lead Spacing ∅d L Dia S Max Max Lead Spacing ∅d 1000 Vdc / 200 Vac PVC10139 0.039 1.6 0.65 1.344 0.032 40.6 16.5 34.1 0.8 PVC10147 0.047 1.6 0.65 1.344 0.032 40.6 16.5 34.1 0.8 PVC10156 0.056 1.6 0.75 1.344 0.032 40.6 19.1 34.1 0.8 1.6 0.75 1.344 0.032 40.6 19.1 1.6 0.85 1.344 0.032 40.6 21.6 PVC10010 0.100 1.6 0.85 1.344 0.032 40.6 21.6 1200 Vdc / 475 Vac 0.0010 1.25 0.42 0.969 0.032 31.8 10.7 0.0012 1.25 0.42 0.969 0.032 31.8 10.7 PVC12215 0.0015 1.25 0.42 0.969 0.032 31.8 10.7 0.8 34.1 0.8 34.1 0.8 24.6 0.8 24.6 0.8 24.6 0.8 pl ac PVC1221 PVC12212 34.1 t 0.068 0.082 em en PVC10168 PVC10182 PVC12218 0.0018 1.25 0.42 0.969 0.032 31.8 10.7 24.6 0.8 PVC12222 0.0022 1.25 0.42 0.969 0.032 31.8 10.7 24.6 0.8 PVC12227 0.0027 1.25 0.42 0.969 0.032 31.8 10.7 24.6 0.8 PVC12233 0.0033 1.25 0.42 0.969 0.032 31.8 10.7 24.6 0.8 1.25 0.42 0.969 0.032 1.25 0.42 0.969 0.032 PVC12256 0.0056 1.25 0.44 0.969 0.032 PVC12268 0.0068 1.25 0.47 0.969 PVC12282 0.0082 1.25 0.50 0.969 0.010 1.25 0.53 0.969 0.012 1.25 0.57 0.969 10.7 24.6 0.8 10.7 24.6 0.8 31.8 11.2 24.6 0.8 0.032 31.8 11.9 24.6 0.8 0.032 31.8 12.7 24.6 0.8 0.032 31.8 13.5 24.6 0.8 0.032 31.8 14.5 24.6 0.8 71 5P PVC1211 PVC12112 31.8 31.8 re 0.0039 0.0047 as PVC12239 PVC12247 PVC12115 0.015 1.25 0.61 0.969 0.032 31.8 15.5 24.6 0.8 PVC12118 0.018 1.65 0.56 1.344 0.032 41.9 14.2 34.1 0.8 PVC12122 0.022 1.65 0.60 1.344 0.032 41.9 15.2 34.1 0.8 PVC12127 0.027 1.65 0.65 1.344 0.032 41.9 16.5 34.1 0.8 PVC12133 0.033 1.65 0.70 1.344 0.032 41.9 17.8 34.1 0.8 0.039 1.65 0.74 1.344 0.032 41.9 18.8 34.1 0.8 0.047 1.65 0.80 1.344 0.032 41.9 20.3 34.1 0.8 PVC1621 0.0010 1.25 0.42 0.969 0.032 31.8 10.7 24.6 0.8 PVC16215 0.0015 1.25 0.42 0.969 0.032 31.8 10.7 24.6 0.8 O b Se so e le 41 te 8P or PVC12139 PVC12147 1600 Vdc / 475 Vac PVC16222 0.0022 1.25 0.42 0.969 0.032 31.8 10.7 24.6 0.8 PVC16227 0.0027 1.25 0.42 0.969 0.032 31.8 10.7 24.6 0.8 PVC1623 0.0030 1.25 0.42 0.969 0.032 31.8 10.7 24.6 0.8 PVC16233 0.0033 1.25 0.42 0.969 0.032 31.8 10.7 24.6 0.8 PVC1624 0.0040 1.25 0.42 0.969 0.032 31.8 10.7 24.6 0.8 PVC16247 0.0047 1.25 0.42 0.969 0.032 31.8 10.7 24.6 0.8 PVC1625 0.0050 1.25 0.42 0.969 0.032 31.8 10.7 24.6 0.8 PVC1626 0.0060 1.25 0.44 0.969 0.032 31.8 11.2 24.6 0.8 PVC16268 0.0068 1.25 0.47 0.969 0.032 31.8 11.9 24.6 0.8 PVC1627 0.0070 1.25 0.50 0.969 0.032 31.8 12.7 24.6 0.8 PVC16275 0.0075 1.25 0.50 0.969 0.032 31.8 12.7 24.6 0.8 PVC1628 0.0080 1.25 0.50 0.969 0.032 31.8 12.7 24.6 0.8 PVC16282 0.0082 1.25 0.50 0.969 0.032 31.8 12.7 24.6 0.8 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type PVC Polyester and Polypropylene Film/Foil Capacitors RoHS Compliant Inches Millimeters Catalog Cap L Dia S L Dia S Part Number (µF) Max Max Lead Spacing Max Max Lead Spacing ∅d PVC1611 0.010 1.25 0.53 0.969 0.032 31.8 13.5 24.6 0.8 PVC16115 0.015 1.25 0.61 1.344 0.032 33.8 15.5 34.1 0.8 PVC1612 0.020 1.65 0.60 1.344 0.032 41.9 15.2 34.1 0.8 PVC16122 0.022 1.65 0.60 1.344 0.032 41.9 15.2 PVC16133 0.033 1.65 0.70 1.344 0.032 41.9 17.8 PVC16147 0.047 1.65 0.80 1.344 0.032 41.9 20.3 PVC1615 0.050 1.65 0.85 1.344 0.032 41.9 21.6 PVC2X21 0.0010 1.25 0.33 0.969 0.032 31.8 8.4 PVC2X212 0.0012 1.25 0.34 0.969 0.032 31.8 PVC2X215 0.0015 1.25 0.36 0.969 0.032 31.8 PVC2X218 0.0018 1.25 0.38 0.969 0.032 31.8 PVC2X222 0.0022 1.25 0.39 0.969 0.032 31.8 PVC2X227 0.0027 1.25 0.42 0.969 0.032 PVC2X233 0.0033 1.25 0.44 0.969 0.032 ∅d 0.8 34.1 0.8 34.1 0.8 34.1 0.8 24.6 0.8 8.6 24.6 0.8 9.1 24.6 0.8 9.7 24.6 0.8 9.9 24.6 0.8 31.8 10.7 24.6 0.8 31.8 11.2 24.6 0.8 0.0039 1.25 0.47 0.969 0.0047 1.25 0.5 0.969 PVC2X256 0.0056 1.25 0.53 0.969 PVC2X268 0.0068 1.25 0.56 0.969 PVC2X282 0.0082 1.25 0.60 PVC2X11 0.0100 1.25 PVC2X112 0.0120 PVC2X115 0.0150 pl ac re as 0.032 31.8 11.9 24.6 0.8 0.032 31.8 12.7 24.6 0.8 0.032 31.8 13.5 24.6 0.8 0.032 31.8 14.2 24.6 0.8 0.969 0.032 31.8 15.2 24.6 0.8 0.65 0.969 0.032 31.8 16.5 24.6 0.8 1.65 0.58 1.344 0.032 41.9 14.7 34.1 0.8 1.65 71 5P PVC2X239 PVC2X247 em en 34.1 2000 Vdc / 500 Vac 0.63 1.344 0.032 41.9 16.0 34.1 0.8 0.018 1.65 0.67 1.344 0.032 41.9 17.0 34.1 0.8 0.022 1.65 0.73 1.344 0.032 41.9 18.5 34.1 0.8 PVC2X127 0.027 1.65 0.78 1.344 0.032 41.9 19.8 34.1 0.8 PVC2X133 0.033 1.65 0.85 1.344 0.032 41.9 21.6 34.1 0.8 O b Se so e le 41 te 8P or PVC2X118 PVC2X122 Part Numbering System PVC 4 01 Series Voltage Capacitance PVC 1 = 100 V 21 = .001 µF 2 = 200V 11 = .01 µF 4 = 400V 01 = .1 µF 6 = 600V 1 = 1.0 µF t 1600 Vdc / 475 Vac 10 = 1000 V 12 = 1200 V 16 = 1600 V 2X = 2000 V CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type PVC Polyester and Polypropylene Film/Foil Capacitors O b Se so e le 41 te 8P or 71 5P as re pl ac em en t Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com