Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors Stable ESR, Long Life, Snap-In Type LP radial snap-in aluminum electrolytic capacitors are small in size and are rated for low voltage applications. Their durable construction guarantees a long life while operating up to 105 ºC with a stable ESR. These features make the Type LP ideal for use in switch-mode power supplies. Highlights • • • Specifications Capacitance Range: Voltage Range: Capacitance tolerance: Operating Temperature Range: Dissipation Factor: DC Leakage Test: Voltage/Frequency Ripple Multipliers: High Reliability 105 ºC 22 to 35 mm diameter with 10 mm lead spacing 100 to 47,000 µF 16 to 250 Vdc ±20% –40 ºC to +105 ºC DF at 120 Hz, +25 ºC Vdc 16 25 - 35 50 - 63 100- 250 DF % 30 25 20 15 For values that are >1000 µF, the DF (%) increases 2% for every additional 1000 µF I = .02CV C = capacitance in µF V = rated voltage I = leakage current in µA Rated Ripple Multipliers Vdc 60 Hz 100 Hz 300 Hz 1000 Hz 10 kHz 100 kHz 10 to 50 Temperature Ripple Multipliers: 0.90 1.00 1.03 1.05 1.10 1.10 63 to 100 0.85 1.00 1.07 1.13 1.19 1.20 160 to 250 0.80 1.00 1.15 1.25 1.35 1.40 Temperature Ripple Multiplier +85 ºC 1.65 +65 ºC 2.25 +45 ºC 2.55 The maximum ripple current at 105 ºC and 120 Hz are the Ratings Table. Adjust to other temperature and frequencies using the tables here. Load Life Test: Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). 1,000 h @ full load at +105 ºC per EIA IS-749 ∆ Capacitance ±20% ESR 200% of limit DCL 100% of limit Shelf Life: 500 h @ 105 ºC, capacitance, ≤200% ESR and DC ±20%, initial requirements Vibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h in each plane CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors Part Numbering System LP 332 M 025 A1 Type Cap Tolerance Voltage Code M = ±20% 025 = 25 Vdc P 3 Case LP 821 = 820 µF 332 = 3300 µF Outline Drawing Sleeve P = Polarized Diameter 250 = 250 Vdc 103 = 10,000 µF Insulating Polarity Length 25 30 35 3 = PVC mm (in) 40 45 50 mm (in) 22 (0.87) A1 A3 A5 A7 A4 A9 25 (1.00) C1 C3 C5 C7 C4 C9 30 (1.18) E1 E3 E5 E7 E4 E9 35 (1.38) H1 H3 H5 H7 H4 H9 (1.00) (1.18) (1.38) (1.57) (1.77) (2.00) Insulation Disk Ratings Cap (µF) Catalog Part Number 4,700 5,600 8,200 12,000 15,000 22,000 27,000 33,000 47,000 LP472M016A1P3 LP562M016C1P3 LP822M016A5P3 LP123M016E3P3 LP153M016H3P3 LP223M016E7P3 LP273M016H7P3 LP333M016H9P3 LP473M016E9P3 2,700 3,300 3,300 4,700 5,600 5,600 6,800 10,000 12,000 15,000 22,000 LP272M025C1P3 LP332M025A1P3 LP332M025C1P3 LP472M025C1P3 LP562M025E1P3 LP562M025C3P3 LP682M025C5P3 LP103M025H3P3 LP123M025H3P3 LP153M025E7P3 LP223M025H9P3 Max ESR Max Ripple @ 120 Hz @ 120 Hz +25 ºC +105 ºC (Ω) (A) 16 Vdc; 20 Vdc Surge 0.141 1.20 0.120 1.43 0.081 1.82 0.055 2.38 0.046 3.00 0.030 3.53 0.025 4.27 0.020 5.00 0.020 6.80 25 Vdc; 32 Vdc Surge 0.180 1.000 0.151 1.160 0.150 1.143 0.106 1.480 0.090 1.857 0.089 1.730 0.073 1.940 0.050 3.333 0.041 2.970 0.033 3.360 0.023 4.857 Size (Inches) D L Size (mm) D L 0.866 0.984 0.866 1.181 1.378 1.181 1.378 1.378 1.181 0.984 0.984 1.378 1.181 1.181 1.575 1.575 1.969 1.969 22 25 22 30 35 30 35 35 30 25 25 35 30 30 40 40 50 50 0.984 0.866 0.984 0.984 1.181 0.984 0.984 1.378 1.378 1.181 1.378 0.984 0.984 0.984 0.984 0.984 1.181 1.378 1.181 1.181 1.575 1.969 25 22 25 25 30 25 25 35 35 30 35 25 25 25 25 25 30 35 30 30 40 50 Cap (µF) Catalog Part Number 1,800 2,700 3,900 5,600 6,800 6,800 8,200 10,000 12,000 15,000 LP182M035A1P3 LP272M035C1P3 LP392M035E1P3 LP562M035E3P3 LP682M035E5P3 LP682M035C7P3 LP822M035H3P3 LP103M035E7P3 LP123M035H7P3 LP153M035H9P3 1,200 1,500 2,200 2,200 3,300 3,300 3,300 3,900 4,700 LP122M050A1P3 LP152M050A1P3 LP222M050A5P3 LP222M050E1P3 LP332M050E3P3 LP332M050C5P3 LP332M050C3P3 LP392M050C7P3 LP472M050H3P3 Max ESR Max Ripple @ 120 Hz @ 120 Hz +25 ºC +105 ºC (Ω) (A) 35 Vdc; 44 Vdc Surge 0.188 1.040 0.155 1.257 0.108 1.571 0.074 2.050 0.060 2.286 0.061 2.320 0.051 2.690 0.041 3.000 0.035 3.590 0.028 4.000 50 Vdc; 63 Vdc Surge 0.280 0.860 0.225 0.983 0.151 1.330 0.150 1.429 0.101 1.760 0.101 1.710 0.101 1.710 0.085 1.970 0.071 2.270 Size (Inches) D L Size (mm) D L 0.866 0.984 1.181 1.181 1.181 0.984 1.378 1.181 1.378 1.378 0.984 0.984 0.984 1.181 1.378 1.575 1.181 1.575 1.575 1.969 22 25 30 30 30 25 35 30 35 35 25 25 25 30 35 40 30 40 40 50 0.866 0.866 0.866 1.181 1.181 0.984 0.984 0.984 1.378 0.984 0.984 1.378 0.984 1.181 1.378 1.181 1.575 1.181 22 22 22 30 30 25 25 25 35 25 25 35 25 30 35 30 40 30 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors Cap (µF) Catalog Part Number 5,600 6,800 6,800 8,200 LP562M050H5P3 LP682M050E7P3 LP682M050E9P3 LP822M050H9P3 820 1,200 1,800 1,800 2,200 3,300 4,700 6,800 LP821M063A1P3 LP122M063C1P3 LP182M063A7P3 LP182M063E1P3 LP222M063E3P3 LP332M063H3P3 LP472M063E9P3 LP682M063H9P3 820 2,200 2,700 2,700 LP821M100E1P3 LP222M100H7P3 LP272M100H9P3 LP272M100H7P3 150 150 180 220 220 220 270 270 330 390 470 LP151M200C1P3 LP151M200A1P3 LP181M200C1P3 LP221M200C1P3 LP221M200E1P3 LP221M200A3P3 LP271M200E1P3 LP271M200C3P3 LP331M200E3P3 LP391M200C5P3 LP471M200E5P3 Max ESR Max Ripple @ 120 Hz @ 120 Hz +25 ºC +105 ºC (Ω) (A) 50 Vdc; 63 Vdc Surge 0.059 2.60 0.049 3.16 0.049 3.16 0.040 3.43 63 Vdc; 75 Vdc Surge 0.300 0.77 0.210 0.99 0.138 1.34 0.140 1.37 0.113 1.55 0.076 2.20 0.053 2.84 0.037 3.36 100 Vdc; 125 Vdc Surge 0.3 0.98 0.113 2.03 0.092 2.32 0.092 2.32 200 Vdc; 250 Vdc Surge 1.650 0.509 1.650 0.509 1.400 0.571 1.100 0.646 1.100 0.646 1.130 0.660 0.920 0.790 0.920 0.790 0.750 0.886 0.640 0.980 0.540 1.143 Size (Inches) D L Size (mm) D L Cap Max ESR Max Ripple Catalog @ 120 Hz @ 120 Hz Size Size Part Number +25 ºC +105 ºC (Inches) (mm) (Ω) (A) (µF) 1.378 1.181 1.181 1.378 1.378 1.575 1.969 1.969 35 30 30 35 35 40 50 50 0.866 0.984 0.866 1.181 1.181 1.378 1.181 1.378 0.984 0.984 1.575 0.984 1.181 1.181 1.969 1.969 22 25 22 30 30 35 30 35 25 25 40 25 30 30 50 50 1.181 1.378 1.378 1.378 0.984 1.575 1.969 1.575 30 35 35 35 25 40 50 40 0.984 0.866 0.984 0.984 1.181 0.866 1.181 0.984 1.181 0.984 1.181 0.984 0.984 0.984 0.984 0.984 1.181 0.984 1.181 1.181 1.378 1.378 25 22 25 25 30 22 30 25 30 25 30 25 25 25 25 25 30 25 30 30 35 35 D L D L 200 Vdc; 250 Vdc Surge 470 LP471M200E1P3 0.540 1.140 1.181 0.984 30 25 470 LP471M200H3P3 0.540 1.143 1.378 1.181 35 30 560 LP561M200H3P3 0.440 1.310 1.378 1.181 35 30 680 LP681M200E3P3 0.370 1.520 1.181 1.181 30 30 680 LP681M200E5P3 0.370 1.510 1.181 1.378 30 35 680 LP681M200H1P3 0.370 1.510 1.378 0.984 35 25 820 LP821M200H7P3 0.300 1.750 1.378 1.575 35 40 820 LP821M200H3P3 0.300 1.750 1.378 1.181 35 30 1,000 LP102M200H9P3 0.250 2.114 1.378 1.969 35 50 1,000 LP102M200H5P3 0.250 2.114 1.378 1.378 35 35 1200 LP122M200E9P3 0.165 2.810 1.181 1.969 30 50 1,200 LP122M200H5P3 0.165 2.740 1.378 1.378 35 35 1,500 LP152M200H4P3 0.134 3.330 1.378 1.772 35 45 1,800 LP182M200H9P3 0.112 3.800 1.378 1.969 35 50 250 Vdc; 300 Vdc Surge 100 LP101M250A1P3 2.500 0.410 0.866 0.984 22 25 150 LP151M250C1P3 1.660 0.540 0.984 0.984 25 25 180 LP181M250C3P3 1.400 0.686 0.984 1.181 25 30 220 LP221M250E1P3 1.130 0.710 1.181 0.984 30 25 270 LP271M250C3P3 0.922 0.840 0.984 1.181 25 30 330 LP331M250E3P3 0.750 0.914 1.181 1.181 30 30 390 LP391M250H3P3 0.640 1.090 1.378 1.181 35 30 470 LP471M250E7P3 0.530 1.260 1.181 1.575 30 40 470 LP471M250H1P3 0.530 1.260 1.378 0.984 35 25 560 LP561M250H3P3 0.347 1.800 1.378 1.181 35 30 680 LP681M250E9P3 0.370 1.920 1.181 1.969 30 50 680 LP681M250H5P3 0.370 2.070 1.378 1.378 35 35 820 LP821M250H7P3 0.243 2.400 1.378 1.575 35 40 1,000 LP102M250H4P3 0.200 2.720 1.378 1.772 35 45 1,200 LP122M250H9P3 0.165 3.100 1.378 1.969 35 50 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com