Type TIM Solid Tantalum Capacitors Molded, Radial Lead, Solid Tantalum Capacitors The Type TIM radial molded solid tantalum capacitor is great for saving board space with its higher profile and smaller board space requirement. It is ideal for high density packaging coupled with low DCL and low ESR performance needed in compact power supply designs. The radius on the vertical side allows for polarization during automatic or hand insertion. The Type TIM is available in bulk or on radial tape and reel. Highlights ♦ ♦ ♦ ♦ ♦ ♦ ♦ Precision Molded Low DCL Low ESR Radius on vertical edge for polarity identification Excellent temperature stability Standoffs for easier flux removal Resistant to shock and vibraton Specifications Capacitance Range: Voltage Range: Tolerance: Operating Temperature Range: DC Leakage: Capacitance Change Maximum: Maximum Power Dissipation: Reel Packaging per EIA- RS-468: 0.10 µF to 220 µF 6 WVdc to 50 WVdc at 85 ºC ±10%, ±20% –55 ºC to +125 ºC (with proper derating) +25 ºC - See ratings limit +85 ºC - 10 x 25 ºC limit +125 ºC - 12.5 x 25 ºC limit –10% @ –55 ºC +10% @ +85 ºC +15% @ +125 ºC W&X Y Z .090 Watts .100 Watts .125 Watts Case Code Quantity W 1,500 per 14" Reel X 1,500 per 14" Reel Y 1,500 per 14" Reel Z N/A CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type TIM Solid Tantalum Capacitors Capacitor Outline Drawing W Case X, Y, Z Cases W W .020 ±.006 (0.51 ±0.15) (Stand Off) .015 ±.005 (.38 ±0.13) (Stand Off) H H E .500 ±.125 (12.7 ±3.18) .020 ±.001 (0.51 ±0.03) S E .500 ±.125 (12.7 ±3.18) .051 ±0.03 .025 ±.001 (.64 ±0.03) .050R ±.005 (1.27R ±0.13) S T Note: On the “X” Case sizes, the standoff appears only between the two leads Case Code W X Y Z H W T E S Case Height Case Width Case Thickness Case to Wire Lead spacing .345 ±.008 .230 ±.005 .105 ±.005 .050 ±.010 .125 ±.005 (8.76 ±.203) (5.84 ±.127) (2.67 ±.127) (1.27 ±0.25) (3.18 ±0.127) .225 ±.015 .285 ±.015 .170 ±.015 .042 ±.010 .200 ±.005 (5.71 ±0.38 (7.24 ±.0.38) (4.32 ±.0.38) (1.07 ±.0.25) (5.08 ±.0.127) .325 ±.015 .325 ±.015 .170 ±.015 .062 ±.010 .200 ±.005 (8.26 ±0.38) (8.26 ±.0.38) (4.32 ±.0.38) (1.57 ±.0.25) (5.08 ±.0.127) .375 ±.015 .600 ±.015 .195 ±.015 .200 ±.010 .200 ±.005 (9.53 ±0.38) (15.24 ±.0.38) (4.95 ±.0.38) (5.08 ±.0.25) (5.08 ±.0.127) Dimensions in inches Part Numbering System TIM Type TIM 150 Capacitance 104 = 0.10 µF 105 = 1.0 µF 225 = 2.2 µF 186 = 18.6 µF 157 = 150 µF K Tolerance K = ±10% M = ±20% 010 Voltage 006 = 6 Vdc 010 = 10 Vdc 015 = 15 dc 020 = 20 Vdc 025 = 25 Vdc 035 = 35 Vdc 050 = 50 Vdc P 0 Z Polar P = Polar Molded Case 0 Case Code W X Y Z CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type TIM Solid Tantalum Capacitors Ratings Cap Max Max DF Max Ripple Catalog Case DCL @ +25 ºC 25 ºC Part Number Code @ +25 ºC 120 Hz @ 120 Hz @ 1 kHz (µA) (%) (mA rms) (mA rms) (µF) 6 WVdc @ 85 ºC 4 WVdc @ 125 ºC 22 TIM226*006P0X X 1 6 35 290 56 TIM566*006P0Y Y 5 6 89 570 68 TIM686*006P0Y Y 5 6 100 630 220 TIM227*006P0Z Z 10 6 350 1000 10 WVdc @ 85 ºC 7 WVdc @ 125 ºC 6.8 TIM685*010P0X X 1 6 18 150 10 TIM106*010P0W W 1 6 26 220 10 TIM106*010P0X X 1 6 26 220 15 TIM156*010P0W W 1 6 39 270 15 TIM156*010P0X X 1 6 39 270 22 TIM226*010P0Y Y 2 6 58 360 33 TIM336*010P0Y Y 2 6 87 440 39 TIM396*010P0Y Y 5 6 100 480 47 TIM476*010P0Y Y 5 6 120 590 56 TIM566*010P0Y Y 5 6 140 650 150 TIM157*010P0Z Z 10 6 390 920 15 WVdc @ 85 ºC 10 WVdc @ 125 ºC 5.6 TIM565*015P0X X 1 6 22 180 6.8 TIM685*015P0X X 1 6 27 180 8.2 TIM825*015P0X X 1 6 32 200 10 TIM106*015P0Y Y 1 6 35 270 15 TIM156*015P0Y Y 2 6 59 290 22 TIM226*015P0Y Y 5 6 87 360 27 TIM276*015P0Y Y 5 6 100 390 33 TIM336*015P0Y Y 5 6 130 440 20 WVdc @ 85 ºC 13 WVdc @ 125 ºC 5.6 TIM565*020POW W 1 6 29 180 6.8 TIM685*020POW W 1 6 36 200 25 WVdc @ 85 ºC 17 WVdc @ 125 ºC 3.3 TIM335*025P0W W 1 4 21 150 3.3 TIM335*025P0X X 1 6 21 150 4.7 TIM475*025P0X X 1 6 31 180 6.8 TIM685*025P0Y Y 1 6 45 200 10 TIM106*025P0X X 1 6 4 190 10 TIM106*025P0Y Y 1 6 66 240 12 TIM126*025P0Y Y 1 6 79 260 15 TIM156*025P0Y Y 2 6 99 290 CDE may improve your order and shorten delivery by substituting a tighter tolerance or higher voltage capacitors in the same case size. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type TIM Solid Tantalum Capacitors Cap Max Max DF Max Ripple 25 ºC Catalog Case DCL @ +25 ºC Part Number Code @ +25 ºC 120 Hz @ 120 Hz @ 1 kHz (µA) (%) (mA rms) (mA rms) (µF) 35 WVdc @ 85 ºC 23 WVdc @ 125 ºC 0.10 TIM104*035P0X X 1 6 1 9 0.22 TIM224*035P0X X 1 6 2 17 0.47 TIM474*035P0X X 1 6 4.3 36 1.00 TIM105*035P0X X 1 6 9.3 77 2.20 TIM225*035P0W W 1 4 20 120 2.20 TIM225*035P0X X 1 6 20 120 2.70 TIM275*035P0W W 1 4 25 140 3.30 TIM335*035P0X X 1 6 30 150 3.90 TIM395*035P0Y Y 1 6 35 180 4.70 TIM475*035P0X X 1 6 32 155 4.70 TIM475*035P0Y Y 1 6 43 200 6.80 TIM685*035P0Y Y 2 6 63 210 8.20 TIM825*035P0Y Y 5 6 76 220 10.00 TIM106*035P0Y Y 5 6 93 240 22.00 TIM226*035P0Z Z 10 6 200 400 27.00 TIM276*035P0Z Z 10 6 250 450 33.00 TIM336*035P0Z Z 10 6 300 490 50 WVdc @ 85 ºC 33 WVdc @ 125 ºC 0.10 TIM104*050P0X X 1 6 1.3 11 0.22 TIM224*050P0X X 1 6 2.9 24 0.33 TIM334*050P0X X 1 6 4.4 36 1.0 TIM105*050P0W W 1 4 13 86 1.0 TIM105*050P0X X 1 6 13 87 1.5 TIM155*050P0W W 1 4 19 100 1.5 TIM155*050P0X X 1 6 19 100 2.2 TIM225*050P0X X 1 6 29 120 4.7 TIM475*050P0Y Y 5 6 62 200 5.6 TIM565*050P0Y Y 5 6 74 220 6.8 TIM685*050P0Z Z 5 6 90 220 10.0 TIM106*050P0Z Z 5 6 130 270 15.0 TIM156*050P0Z Z 10 6 190 330 CDE may improve your order and shorten delivery by substituting a tighter tolerance or higher voltage capacitors in the same case size. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type TIM Solid Tantalum Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com