Datasheet

Type AVRF –55 °C to 105 °C
SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C
Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling
Type AVRF Capacitors are the best and by a wide margin. With 40% to
60% lower impedance, 30% to 50% smaller case size and more than twice
the life compared to low-ESR type AFC, the Type AVRF also excels at
cold performance down to –55 °C. In addition, this terrific low- impedance
performance, approaching low-ESR tantalum capacitors, is at a significant
cost savings compared to tantalum. The vertical cylindrical cases facilitate
automatic mounting and reflow soldering into the same footprint of like-rated
tantalum capacitors except without the need for voltage derating.
Specifications
Operating Temperature:
Rated Voltage:
Capacitance:
Capacitance Tolerance:
Leakage Current:
Low Temperature
Characteristics @ 120 Hz:
LE
T
E
Highlights
• +105 °C, Up to 5000 Hour Load Life
• Ultra-low Impedance
• Voltage Range: 6.3 Vdc to 35 Vdc
–55 °C to +105 °C
6.3, 10, 16, 25, 35 Vdc
4.7 µF to 1500 µF
±20% @ 120 Hz and +20 °C
0.01 CV or 3 µA @ +20 °C, after two minutes (whichever is greater)
Rated Voltage (Vdc)
Z(-25ºC)/Z(+20ºC)
Dissipation Factor:
10
16
25
35
2
2
2
2
2
3
3
3
3
3
4
4
4
3
3
6.3V
10 V
16 V
25 V
35 V
0.26
0.19
0.16
0.14
0.12
2000 h @ 105 °C, 4.0 — 6.3 mm dia.
Shelf Test: 1000 h @ 105 °C
5000 h @ 105 °C, 8.0 — 10.0 mm dia.
∆ Capacitance ±30% (10 mm Dia.: ±35%)
∆ Capacitance ±30% (10 mm Dia.: ±35%
DF: ≤ 200% of limit (10 mm Dia.: ≤300%)
DF: ≤ 200% of limit (10 mm Dia.: ≤300%)
DCL: ≤ 100% of limit
DCL: ≤ 100% of limit
O
Life Test:
BS
O
Complies with the EU
Directive 2002/95/EC requirement restricting the
use of Lead (Pb), Mercury (Hg), Cadmium (Cd),
Hexavalent chromium
(Cr(VI)), PolyBrominated Biphenyls (PBB) and
PolyBrominated Diphenyl
Ethers (PBDE).
Impedance
Z(-40ºC)/Z(+20ºC)
Ratio
Z(-55ºC)/Z(+20ºC)
6.3
Part Numbering System
AVRF
106
Type
Capacitance
AVRF
475 = 4.7 µF
106 = 10.0 µF
107 = 100.0 µF
M
16
Capacitance
Voltage Code
Tolerance 06 = 6.3 Vdc 25 = 25 Vdc
M = ±20%
10 = 10 Vdc
16 = 16 Vdc
35 = 35 Vdc
B
12T
–F
Case Packaging Code RoHS
Code 12 = Carrier tape
Compliant
Width (mm)
T = Tape & Reel
108 = 1000.0 µF
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AVRF –55 °C to 105 °C
SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C
Outline Drawing & Marking
(4.0 - 6.3 mm Dia.)
Case Dimensions
D ± .05
Code
(mm)
L
(mm)
4.0
5.4 ± 0.2
5.0
5.4 ± 0.3
D
6.3
5.4 ± 0.2
F
8.0
10.2 ± 0.5
G
10.0
10.2 ± 0.5
Ratings
A
W
E
K
(mm)
(ref)
(mm)
(ref)
(mm)
4.3
1.8
0.65 ±0.1
1.0
0.35 +0.15/–0.20
5.3
2.2
0.65 ±0.1
1.5
0.35 +0.15/–0.20
6.6
2.6
0.65 ±0.1
1.8
0.35 +0.15/–0.20
8.3
3.4
0.90 ±0.2
3.1
0.70 ±0.20
10.3
3.5
0.90 ±0.2
4.6
0.70 ±0.20
BS
O
B
C
B, C
LE
T
Case
Catalog
Part Number
Max. DCL
2 min.
(µA)
Max. DF
@ 120Hz/20ºC
22
47
100
220
470
1000
1500
AVRF226M06B12T-F
AVRF476M06B12T-F
AVRF107M06C12T-F
AVRF227M06D16T-F
AVRF477M06F24T-F
AVRF108M06F24T-F
AVRF158M06G24T-F
3.0
3.0
6.3
13.9
29.6
63.0
94.5
0.26
0.26
0.26
0.26
0.26
0.26
0.26
22
33
150
330
470
1000
AVRF226M10B12T-F
AVRF336M10B12T-F
AVRF157M10D16T-F
AVRF337M10F24T-F
AVRF477M10F24T-F
AVRF108M10G24T-F
3.0
3.3
15.0
33.0
47.0
100.0
0.19
0.19
0.19
0.19
0.19
0.19
O
Cap.
(µF)
E
(8.0 - 10.0 mm Dia.)
Max. E.S.R.
Max. Impedance
@ 100kHz/20ºC
@ 100kHz/20ºC
(Ω)
(Ω)
6.3 Vdc
1.65
1.65
1.65
1.65
0.90
0.90
0.50
0.50
0.16
0.16
0.16
0.16
0.08
0.08
10 Vdc
1.65
1.65
1.65
1.65
0.50
0.50
0.16
0.16
0.16
0.16
0.08
0.08
Max. Ripple
Current
@ 100kHz/105ºC
(mA)
Case
Code
Size
DxL
(mm)
Quantity
/Reel
(Ea)
70
70
100
160
600
600
850
B
B
C
D
F
F
G
4x5.4
4x5.4
5x5.4
6.3x5.4
8x10.2
8x10.2
10x10.2
2000
2000
1000
1000
500
500
500
70
70
160
600
600
850
B
B
D
F
F
G
4x5.4
4x5.4
6.3x5.4
8x10.2
8x10.2
10x10.2
2000
2000
1000
500
500
500
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AVRF –55 °C to 105 °C
SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C
Max. DF
@ 120Hz/20ºC
10
22
47
68
330
470
AVRF106M16B12T-F
AVRF226M16B12T-F
AVRF476M16C12T-F
AVRF686M16D16T-F
AVRF337M16F24T-F
AVRF477M16F24T-F
3.0
3.5
7.5
10.9
52.8
75.2
0.16
0.16
0.16
0.16
0.16
0.16
10
22
33
47
68
150
220
330
470
AVRF106M25B12T-F
AVRF226M25C12T-F
AVRF336M25D16T-F
AVRF476M25D16T-F
AVRF686M25D16T-F
AVRF157M25F24T-F
AVRF227M25F24T-F
AVRF337M25F24T-F
AVRF477M25G24T-F
3.0
5.5
8.3
11.8
17.0
37.5
55.0
82.5
117.5
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
4.7
10
22
33
47
100
150
220
330
AVRF475M35B12T-F
AVRF106M35C12T-F
AVRF226M35D16T-F
AVRF336M35D16T-F
AVRF476M35F24T-F
AVRF107M35F24T-F
AVRF157M35F24T-F
AVRF227M35F24T-F
AVRF337M35G24T-F
3.0
3.5
7.7
11.6
16.5
35.0
52.5
77.0
115.5
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
BS
O
Cap.
(µF)
Max. E.S.R.
@ 100kHz/20ºC
(Ω)
16 Vdc
1.65
1.65
0.90
0.50
0.16
0.16
25 Vdc
1.65
0.90
0.50
0.50
0.50
0.16
0.16
0.16
0.08
35 Vdc
1.65
0.90
0.50
0.50
0.16
0.16
0.16
0.16
0.08
Max. Impedance
@ 100kHz/20ºC
(Ω)
Max. Ripple
Current
@ 100kHz/105ºC
(mA)
Case
Code
Size
DxL
(mm)
Quantity
/Reel
(Ea)
1.65
1.65
0.90
0.50
0.16
0.16
70
70
100
160
600
600
B
B
C
D
F
F
4x5.4
4x5.4
5x5.4
6.3x5.4
8x10.2
8x10.2
2000
2000
1000
1000
500
500
1.65
0.90
0.50
0.50
0.50
0.16
0.16
0.16
0.08
E
Max. DCL
2 min.
(µA)
70
100
160
160
160
600
600
600
850
B
C
D
D
D
F
F
F
G
4x5.4
5x5.4
6.3x5.4
6.3x5.4
6.3x5.4
8x10.2
8x10.2
8x10.2
10x10.2
2000
1000
1000
1000
1000
500
500
500
500
70
100
160
160
600
600
600
600
850
B
C
D
D
F
F
F
F
G
4x5.4
5x5.4
6.3x5.4
6.3x5.4
8x10.2
8x10.2
8x10.2
8x10.2
10x10.2
2000
1000
1000
1000
500
500
500
500
500
LE
T
Catalog
Part Number
1.65
0.90
0.50
0.50
0.16
0.16
0.16
0.16
0.08
Recommended Land Patterns by case size for AVRF series
A
B
O
B
C
Case
Code
B
C
D
F
G
Case
Size
4x5.4
5x5.4
6.3x5.4
8x10.2
10x10.2
Land Dimensions (mm)
C
B
A
1.6
2.6
1.0
1.6
3.0
1.4
1.6
3.5
1.9
2.5
3.5
3.0
2.5
4.0
4.0
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AVRF –55 °C to 105 °C
SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C
Recommended Soldering methods
Recommended Reflow Soldering Profiles:
O
BS
O
For 8 mm
case diameter
LE
T
E
For case diameters
4 thru 6.3 mm
For 10 mm
case diameter
Soldering with a solder iron should be performed with a maximum soldering iron tip temperature
of 350±5°C for 3 to 4 seconds.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AVRF –55 °C to 105 °C
SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C
O
BS
O
LE
T
E
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data
(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer
is responsible for checking, confirming and verifying the extent to which the Information contained in this
datasheet or other publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based
on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has
of operating conditions that such Cornell Dubilier company regards as typical for such applications, but
are not intended to constitute any guarantee, warranty or representation regarding any such matter – and
Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning
the suitability for a specific customer application, use, storage, transportation, or operating environment.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given
gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability
for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality
and safety standards regarding the design and manufacturing of its products, in light of the current state
of the art, isolated component failures may still occur. Accordingly, customer applications which require a
high degree of reliability or safety should employ suitable designs or other safeguards (such as installation
of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the
failure of an electrical component does not result in a risk of personal injury or property damage. Although
all product-related warnings, cautions and notes must be observed, the customer should not assume that all
safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be
required.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com