Type AVEZ –55 °C to +105 °C Low Impedance SMT

Type AVEZ –55 °C to +105 °C
Low Impedance SMT Aluminum Electrolytic Capacitors
For Filtering, Bypassing and Power Supply Decoupling
Type AVEZ Capacitors are rated for 1000 hours at 105 ºC with low
impedance characteristics. They are ideal for high density PC board
packaging. The Type AVEZ offers a low in-place-cost for a high
quality performer. The vertical cylindrical cases facilitate automatic
mounting and reflow soldering into the same footprint of like-rated
tantalum capacitors except without the need for voltage derating.
Type AVEZ is RoHS compliant.
Highlights
• +105 °C, Up to 1000 Hours Load Life
• Capacitance Range: 1.0 µF to 220 µF
• Voltage Range: 6.3 Vdc to 50 Vdc
Specifications
Operating Temperature:
Rated Voltage:
Capacitance:
Capacitance Tolerance:
Leakage Current:
–55 °C to +105 °C
6.3, 10, 16, 25, 35, 50 Vdc
1.0 µF to 220 µF
±20% @ 120 Hz and +20 °C
I = 0.01 CV or 3 (µA) whichever is greater after 2 minutes
C = rated capacitance in µF, V = rated DC working voltage
Ripple Current Multiplier:
Vdc
Freq. (Hz)
50, 60
120
1k
10 k up
0.64
0.80
0.93
1.00
6.3 ~ 50
Dissipation Factor:
(Tan d at 120 Hz, 20 ºC)
Low Temperature
Characteristic (at 120 Hz):
Load Life Test:
Complies with the EU Directive
2002/95/EC requirement restricting
the use of Lead (Pb), Mercury (Hg),
Cadmium (Cd), Hexavalent chromium
(Cr(VI)), PolyBrominated Biphenyls
(PBB) and PolyBrominated Diphenyl
Ethers (PBDE).
Rated Voltage
6.3
10
16
25
35
50
Tan δ Max
0.28
0.24
0.20
0.16
0.14
0.12
Rated Voltage
Impedance
Ratio
6.3
10
16
25
35
50
Z(–25 ºC) / Z(+20 ºC)
4
3
2
2
2
2
Z(–40 ºC) / Z(+20 ºC)
8
5
4
3
3
3
Test Time
1,000 Hours
Capacitance Change
Within ±25% of initial value
Dissipation Factor
Less than 200% of specified value
Leakage Current
Within specified value
* The above specifications shall be satisfied when the
capacitors are restored to 20 ºC after the rated voltage is
applied for 1,000 hrs at 105 ºC
Shelf LifeTest: Test time: 1000 hours; test limits are the same as those for life test.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AVEZ –55 °C to +105 °C
Low Impedance SMT Aluminum Electrolytic Capacitors
Outline Drawing, Case Code & Dimensions Table
-
+
Case Ø D
L
A
Code (mm)
(mm)
B
C
(mm) (mm) (mm)
W
P ±0.2
(mm)
(mm)
B
4.0 5.3 ±0.2 4.3
4.3
2.0
0.5 to 0.8
1.0
C
5.0 5.3 ±0.2 5.3
5.3
2.3
0.5 to 0.8
1.5
D
6.3 5.3 ±0.2 6.6
6.6
2.7
0.5 to 0.8
2.0
X
6.3 7.7 ±0.3 6.6
6.6
2.7
0.5 to 0.8
2.0
Part Numbering System
AVEZ
106
M
25
C
12T
–F
Type
Capacitance
Capacitance
Voltage Code
Case
Packaging Code
RoHS
Tolerance
AVEZ
105 = 1.0 µF
M = ±20%
Code
06 = 6.3 Vdc 25 = 25 Vdc
See
106 = 10.0 µF
10 = 10 Vdc 35 = 35 Vdc
Table
107 = 100.0 µF
16 = 16 Vdc 50 = 50 Vdc
Compliant
12 = Carrier Tape
Width (mm)
T = Tape & Reel
Ratings
Catalog
Cap
Part Number
(µF)
Max
Max
Max
DCL
DF
Impedance
2 min. 120 Hz 20 ºC
(µA)
Max
Ripple Current Case
Size
Quantity
100 kHz 20 ºC 100 kHz 105 °C Code
DxL
per Reel
(mm)
(each)
(ohms)
(mA)
6.3 Vdc ( 8 Vdc Surge)
22
AVEZ226M06B12T-F
3.0
0.28
3.20
65
B
4 x 5.3
2000
33
AVEZ336M06C12T-F
3.0
0.28
1.50
110
C
5 x 5.3
1000
47
AVEZ476M06C12T-F
3.0
0.28
1.50
110
C
5 x 5.3
1000
100
AVEZ107M06D16T-F
6.3
0.28
0.85
170
D
6.3 x 5.3
1000
150
AVEZ157M06X16T-F
9.5
0.28
0.50
255
X
6.3 x 7.7
1000
220
AVEZ227M06X16T-F 13.9
0.28
0.50
255
X
6.3 x 7.7
1000
65
B
4 x 5.3
2000
10 Vdc ( 13 Vdc Surge)
10
AVEZ106M10B12T-F
3.0
0.24
3.20
22
AVEZ226M10C12T-F
3.0
0.24
1.50
110
C
5 x 5.3
1000
33
AVEZ336M10C12T-F
3.0
0.24
1.50
110
C
5 x 5.3
1000
47
AVEZ476M10D16T-F
3.0
0.24
0.85
170
D
6.3 x 5.3
1000
100
AVEZ107M10D16T-F
6.3
0.24
0.85
170
D
6.3 x 5.3
1000
150
AVEZ157M10X16T-F
9.5
0.24
0.50
255
X
6.3 x 7.7
1000
220
AVEZ227M10X16T-F 13.9
0.24
0.50
255
X
6.3 x 7.7
1000
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AVEZ –55 °C to +105 °C
Low Impedance SMT Aluminum Electrolytic Capacitors
Catalog
Cap
Part Number
(µF)
Max
Max
DCL
DF
2 min. 120 Hz 20 ºC
(µA)
Max
Impedance
Max
Ripple Current Case
Size
Quantity
100 kHz 20 ºC 100 kHz 105 °C Code
DxL
per Reel
(mm)
(each)
(ohms)
(mA)
16 Vdc ( 13 Vdc Surge)
10
AVEZ106M16B12T-F
3.0
0.2
3.20
65
B
4 x 5.3
2000
22
AVEZ226M16C12T-F
3.0
0.2
1.50
110
C
5 x 5.3
1000
33
AVEZ336M16D16T-F
3.0
0.2
0.85
170
D
6.3 x 5.3
1000
47
AVEZ476M16D16T-F
3.0
0.2
0.85
170
D
6.3 x 5.3
1000
100
AVEZ107M16D16T-F
6.3
0.2
0.85
170
D
6.3 x 5.3
1000
150
AVEZ157M16X16T-F
9.5
0.2
0.50
255
X
6.3 x 7.7
1000
220
AVEZ227M16X16T-F 13.9
0.2
0.50
255
X
6.3 x 7.7
1000
25 Vdc ( 31 Vdc Surge)
4.7
AVEZ475M25B12T-F
3.0
0.16
3.20
65
B
4 x 5.3
2000
10
AVEZ106M25C12T-F
3.0
0.16
1.50
110
C
5 x 5.3
1000
22
AVEZ226M25D16T-F
3.0
0.16
0.85
170
D
6.3 x 5.3
1000
33
AVEZ336M25D16T-F
3.0
0.16
0.85
170
D
6.3 x 5.3
1000
47
AVEZ476M25D16T-F
3.0
0.16
0.85
170
D
6.3 x 5.3
1000
100
AVEZ107M25X16T-F
6.3
0.16
0.5
255
X
6.3 x 7.7
1000
35 Vdc ( 44 Vdc Surge)
4.7
AVEZ475M35B12T-F
3.0
0.14
3.20
65
B
4 x 5.3
2000
10
AVEZ106M35C12T-F
3.0
0.14
1.50
110
C
5 x 5.3
1000
22
AVEZ226M35D16T-F
3.0
0.14
0.85
170
D
6.3 x 5.3
1000
33
AVEZ336M35D16T-F
3.0
0.14
0.85
170
D
6.3 x 5.3
1000
47
AVEZ476M35X16T-F
3.0
0.14
0.50
255
X
6.3 x 7.7
1000
50 Vdc ( 63 Vdc Surge)
1.0
AVEZ105M50B12T-F
3.0
0.12
5.0
30
B
4 x 5.3
2000
2.2
AVEZ225M50B12T-F
3.0
0.12
5.0
30
B
4 x 5.3
2000
3.3
AVEZ335M50B12T-F
3.0
0.12
5.0
30
B
4 x 5.3
2000
4.7
AVEZ475M50C12T-F
3.0
0.12
3.0
50
C
5 x 5.3
1000
10
AVEZ106M50D16T-F
3.0
0.12
2.0
70
D
6.3 x 5.3
1000
22
AVEZ226M50D16T-F
3.0
0.12
3.0
70
D
6.3 x 5.3
1000
33
AVEZ336M50X16T-F
3.0
0.12
1.0
170
X
6.3 x 7.7
1000
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AVEZ –55 °C to +105 °C
Low Impedance SMT Aluminum Electrolytic Capacitors
Recommended Land Patterns by case size for AVEZ series
B
A
B
C
Land Dimensions (mm)
Case
Code
Case Size
C
B
A
B
4x5.3
1.6
2.6
1
C
5x5.3
1.6
3
1.4
D
6.3x5.3
1.6
3.5
1.9
X
6.3x7.7
1.6
3.5
1.9
Recommended Soldering Methods
Recommended Reflow Soldering Profile:
Parts should be subjected to just one reflow soldering process.
Soldering with a solder iron should be performed with a maximum soldering iron tip
temperature of 350±5°C for 3 to 4 seconds.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AVEZ –55 °C to +105 °C
Low Impedance SMT Aluminum Electrolytic Capacitors
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data
(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer
is responsible for checking, confirming and verifying the extent to which the Information contained in this
datasheet or other publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based
on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has
of operating conditions that such Cornell Dubilier company regards as typical for such applications, but
are not intended to constitute any guarantee, warranty or representation regarding any such matter – and
Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning
the suitability for a specific customer application, use, storage, transportation, or operating environment.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given
gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability
for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality
and safety standards regarding the design and manufacturing of its products, in light of the current state
of the art, isolated component failures may still occur. Accordingly, customer applications which require a
high degree of reliability or safety should employ suitable designs or other safeguards (such as installation
of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the
failure of an electrical component does not result in a risk of personal injury or property damage. Although
all product-related warnings, cautions and notes must be observed, the customer should not assume that all
safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be
required.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com