Type AEB SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C Low Impedance and Long Life for High Voltage, High Ripple Current Applications Type AEB capacitors are it for high voltage applications like input bus capacitors in board mounted miniature AC/DC supplies. The AEB’s low impedance in ratings up to 450 Vdc, and long life, make it ideal for power supply input and other high voltage applications. The vertical, cylindrical cases make easy automatic mounting and reflow soldering. Highlights • +105 °C, Up to 5000 Hour Load Life • Capacitance Range: 2.2 µF to 100 µF • Voltage Range: 160 Vdc to 450 Vdc Specifications Operating Temperature: Rated Voltage: Capacitance: Capacitance Tolerance: Impedance Ratio (at 120 Hz): –25 °C to +105 °C 160, 200, 250, 350, 400, 450 Vdc 2.2 µF to 100 µF ±20% @ 120 Hz and +20 °C Rated Voltage 160 200 250 350 400 450 Z(-25°C)/Z(+20°C) 2 2 3 5 6 6 Life Test: 5000 h @ +105 °C, L — S Cases 4000 h @ +105 °C, K Case 3000 h @ +105 ºC, J Case ∆ Capacitance ± 20% DF: ≤ 200% of limit DCL: ≤ 100% of limit Shelf Test: 1000 h @ 105 °C ∆ Capacitance ± 20% DF: ≤ 200% of limit DCL: ≤ 100% of limit Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). AEB Series Marking Outline Drawing Case Dimensions Case Code D ±0.5 L ±0.5 A ±0.2 H (max) I (ref) W P (ref) K (mm) J 10.0 13.5 10.3 12 3.5 0.9 ±0.2 4.6 0.7 ± 0.2 K 10.0 16.5 10.3 12 3.5 0.9 ±0.2 4.6 0.7 ± 0.2 L 12.5 16.5 13.5 15 4.7 0.9 ±0.3 4.4 0.7 ± 0.3 P 16.0 16.5 17.0 19 5.5 1.2 ±0.3 6.7 0.7 ± 0.3 U 16.0 21.5 17.0 19 5.5 1.2 ±0.3 6.7 0.7 ± 0.3 R 18.0 16.5 19.0 21 6.7 1.2 ±0.3 6.7 0.7 ± 0.3 S 18.0 21.5 19.0 21 6.7 1.2 ±0.3 6.7 0.7 ± 0.3 Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type AEB SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C Ratings Max. Max. Max. Max. Dissipation Impedance Ripple Current Cap Catalog DCL Factor @ @ 100 kHz @ 105 °C (µF) Part Number 2 min 120 Hz 20 °C 100 kHz (µA) 20 °C (Ω) (mA) Size (mm) Quantity DxL Reel 160 Vdc 10.0 AEB106M2CJ32T-F 106 0.15 3.00 70 10 x 13.5 250 33.0 AEB336M2CL32T-F 327 0.15 1.80 470 12.5 x 16.5 150 47.0 AEB476M2CP44T-F 461 0.15 1.40 600 16 x 16.5 125 68.0 AEB686M2CU44T-F 663 0.15 0.55 750 16 x 21.5 75 68.0 AEB686M2CR44T-F 663 0.15 0.80 750 18 x 16.5 125 100.0 AEB107M2CS44T-F 970 0.15 0.50 1060 18 x 21.5 75 200 Vdc 22.0 AEB226M2DL32T-F 274 0.15 1.80 470 12.5 x 16.5 150 33.0 AEB336M2DP44T-F 406 0.15 1.40 600 16 x 16.5 125 47.0 AEB476M2DR44T-F 574 0.15 0.80 600 18 x 16.5 125 68.0 AEB686M2DU44T-F 826 0.15 0.55 750 16 x 21.5 75 100.0 AEB107M2DS44T-F 1210 0.15 0.50 1060 18 x 21.5 75 10.0 AEB106M2EK32T-F 160 0.15 2.50 88 10 x 16.5 200 22.0 AEB226M2EP44T-F 340 0.15 1.60 560 16 x 16.5 125 33.0 AEB336M2ER44T-F 505 0.15 0.85 560 18 x 16.5 125 47.0 AEB476M2EU44T-F 715 0.15 0.70 710 16 x 21.5 75 68.0 AEB686M2ES44T-F 1030 0.15 0.60 990 18 x 21.5 75 10.0 AEB106M2VP44T-F 220 0.20 3.20 270 16 x 16.5 125 22.0 AEB226M2VR44T-F 472 0.20 1.60 350 18 x 16.5 125 33.0 AEB336M2VU44T-F 703 0.20 1.20 480 16 x 21.5 75 47.0 AEB476M2VS44T-F 997 0.20 1.00 670 18 x 21.5 75 250 250 Vdc 350 Vdc 400 Vdc 3.3 AEB335M2GJ32T-F 89 0.24 8.00 40 10 x 13.5 4.7 AEB475M2GK32T-F 123 0.24 5.50 50 10 x 16.5 200 10.0 AEB106M2GP44T-F 250 0.24 3.60 250 16 x 16.5 125 22.0 AEB226M2GU44T-F 538 0.24 2.20 410 16 x 21.5 75 33.0 AEB336M2GS44T-F 802 0.24 1.20 600 18 x 21.5 75 450 Vdc 2.2 AEB225M2WJ32T-F 69 0.24 11.00 29 10 x 13.5 250 3.3 AEB335M2WK32T-F 99 0.24 7.00 41 10 x 16.5 200 4.7 AEB475M2WL32T-F 137 0.24 4.80 49 12.5 x 16.5 150 10.0 AEB106M2WR44T-F 280 0.24 3.00 310 18 x 16.5 125 22.0 AEB226M2WS44T-F 604 0.24 1.80 560 18 x 21.5 75 Part Numbering System AEB Type 106 Capacitance 105 = 1.0 µF 106 = 10.0 µF 107 = 100.0 µF M 2C J 32T Voltage Code Case Code Packaging Information Capacitance Tolerance 2C = 160 Vdc 2V = 350 Vdc M = ±20% 2D = 200 Vdc 2G = 400 Vdc 2E = 250 Vdc 2W = 450 Vdc -F RoHS Compliant 32 = Carrier tape Width (mm) T = Tape & Reel See the Aluminum SMT Application Guide for Packaging Information. B = bulk Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type AEB SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C Recommended Land Pattern Case Code C A B B Case Dia. A (mm) (mm) B (mm) C (mm) J 10 4.0 4.5 2.0 K 10 4.0 4.5 2.0 L 12.5 4.0 5.7 2.0 P 16 6.0 6.5 2.5 U 16 6.0 6.5 2.5 R 18 6.0 7.5 2.5 S 18 6.0 7.5 2.5 Ripple Current Correction Factor Ripple Current Correction Factor vs Frequency Vdc 120 Hz 1kHz 10kHz to 30kHz 30kHz to 100kHz 160 to 250 0.55 0.85 0.90 1.00 350 to 450 0.50 0.80 0.90 1.00 Recommended Reflow Soldering Profile for AEB Series (10 to 18 mm dia.) Top surface temperature (°C) 230°C 120 seconds 20 sec. Time Max. top surface temperature during reflow soldering 230°C Maximum time at peak temperature 5 seconds Maximum time at or above 200°C 20 seconds Number of reflow processes Terminal Material 1 copper clad iron Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type AEB SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C Typical Performance Curves Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type AEB SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type AEB SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type AEB SMT Aluminum Electrolytic Capacitors - High Voltage, 105 °C Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com