Type 704M

Type 704M
Metallized Polypropylene Film Capacitors
Type 704M
Axial Lead
Round Profile
Metallized Polypropylene
Film Capacitors
Specifications
Dissipation Factor:
0.1% Maximum @ 1 KHz, +25C.
Capacitance Range:
1.0 to 20.0 F
(additional values available upon request)
Capacitance Tolerance:
5% and 10%, standard
(tighter tolerances available upon request)
Voltage Rating:
200 VDC/140 VAC
Operating Temperature
Units may be operated at full rated
voltage from -55C to +85C.
Voltage De-rating above +85C:
Units may be operated up to a
maximum of +105C provided the
voltage is de-rated linearly to 50%
of the +85C rating.
Lead Wire (d):
Tinned Copper.
0.032 (0.8) diameter (#20 AWG)
Insulation Resistance (measured at 100 VDC):
At +25C: 200,000 M-F
At +85C: 10,000 M-F
(These are minimum ratings, call us if you have
a more demanding requirement)
Encapsulation:
Wrapped with flame retardant polyester
tape (meets UL510 specifications) and
potted with flame retardant epoxy (meets
UL94V-0 specifications).
Dielectric/Construction:
Metallized Polypropylene film, single
section design. Non-Inductively wound.
High End Audio Applications:
Amplifiers, Preamps, Crossover Networks.
Polypropylene’s low dissipation factor,
ESR and dielectric absorption, along with
long term capacitance stability over time
make the 704M series ideal for high
quality audio applications.
In addition to the information provided here CDE also offers complete design and
manufacturing of specific capacitance values, custom form factors, special lead terminations,
etc.
Dimensions are in inches, millimeters in parentheses
#SBE704M7/05
telephone: 802.476.4146
web site: www.SBElectronics.com
Barre,
Vermont
05641
USA
fax:
802.661.3950
e-mail:
[email protected]
CDE
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
SB
Electronics
Tel: 802-476-4146  Fax: 802-476-4149
131 South Main St.  Barre, VT 05641-4854 USA
www.SBElectronics.com  [email protected]
Type 704M
Metallized Polypropylene Film Capacitors
Ordering/Part Number Information
704M 106 5 2 – XXX
A suffix may be added to denote special construction,
packaging, marking, etc.
DC Voltage Rating.
2 = 200 VDC
Capacitance Tolerance. 9 = 10%; 5 = 5%; 3 = 3%; 2 = 2%; 1 = 1%
Capacitance. Expressed in Picofarads. The first two digits are
the significant figures, the third is the number of zeros following
(i.e. 106 = 10,000,000 pF = 10.0 F).
CDE Type Number. Identifies basic capacitor design.
Standard Marking Format
Sample Marking
on unit
Description
CDE
704M
200V
106J
0510
CDE 704M
106J 200V
0510
-
Tolerance codes
per EIA standards
CDE Identification
Type Number.
DC Voltage Rating
Capacitance and Tolerance Code
Weekly Date Code
F
G
H
J
K
(i.e. 10th week of 2005)
1%
2%
3%
5%
10%
Dimension Outline
L
DIA
MAX
MAX
1.50 (38.1)
MIN.
1.50 (38.1)
MIN.
Lead Wire Size and Additional Termination Options
Standard lead wire size is 0.032 (0.8) diameter (#20 AWG), Solid tinned copper wire. We can also provide a variety
of other wire sizes and material (i.e. heavier gauges, insulated wire, tinned copper-clad steel, smaller gauges, etc.).
If the wire size or material doesn’t meet your requirements please contact us. We can accommodate your needs.
SB Electronics
131 South Main St. 
Dimensions are in inches, millimeters in parentheses Tel: 802-476-4146  Fax: 802-476-4149
CDE reserves the right to amendwww.SBElectronics.com
design data
 [email protected]
MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
CDE Cornell Dubilier • 1605
E. Rodney French Blvd. • New Bedford,
Type 704M
Metallized Polypropylene Film Capacitors
Type 704M Sizes and Ratings – 200 VDC/140 VAC
1
2
2
Cap
(F)
L MAX
DIA MAX
dV/dt
V/sec
Base Part #
1.0
1.2
1.5
1.8
704M10552
704M12552
704M15552
704M18552
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
0.37 (9.4)
0.40 (10.2)
0.44 (11.2)
0.48 (12.2)
7
8
11
11
30.9
25.9
20.9
17.5
2.0
2.2
2.5
2.7
704M20552
704M22552
704M25552
704M27552
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
0.50 (12.7)
0.52 (13.2)
0.55 (14.0)
0.57 (14.5)
11
11
11
11
15.9
14.5
12.9
12.1
3.0
3.3
3.6
3.9
704M30552
704M33552
704M36552
704M39552
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
0.60 (15.2)
0.63 (16.0)
0.65 (16.5)
0.68 (17.3)
11
11
11
11
11.0
10.1
9.4
8.8
4.0
4.7
5.0
5.6
704M40552
704M47552
704M50552
704M56552
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
0.69 (17.5)
0.74 (18.8)
0.76 (19.3)
0.80 (20.3)
11
11
11
12
8.6
7.5
7.2
6.6
6.0
6.8
7.0
7.5
8.0
9.0
704M60552
704M68552
704M70552
704M75552
704M80552
704M90552
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
0.83 (21.1)
0.88 (22.4)
0.89 (22.6)
0.92 (23.4)
0.95 (24.1)
1.01 (25.7)
12
12
12
12
12
12
6.3
5.7
5.6
5.4
5.2
4.8
10.0
11.0
12.0
13.0
14.0
15.0
704M10652
704M11652
704M12652
704M13652
704M14652
704M15652
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.06 (26.9)
1.11 (28.2)
1.16 (29.5)
1.20 (30.5)
1.24 (31.5)
1.29 (32.8)
12
12
12
12
12
12
4.6
4.4
4.2
4.1
4.0
3.9
16.0
17.0
18.0
19.0
20.0
704M16652
704M17652
704M18652
704M19652
704M20652
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
1.33 (33.8)
1.37 (34.8)
1.41 (35.8)
1.44 (36.6)
1.48 (37.6)
12
12
12
12
12
3.8
3.8
3.7
3.7
3.7
1
*ESR-m
@100KHz
Please refer to Ordering/Part Number page for specific part numbering details.
Please contact us for additional details regarding current carrying capability.
* ESR ratings listed are Maximum. Please contact us for additional ESR data.
Dimensions are in inches, millimeters in
parentheses CDE reserves the right to amend design
data
• Phone: (508)996-8561 • Fax: (508)996-3830
CDE Cornell Dubilier • 1605 E. Rodney
French Blvd. • New Bedford, MA 02744
131 South Main St.  Barre, VT 05641-4854 USA
www.SBElectronics.com  [email protected]
Type 704M
Metallized Polypropylene Film Capacitors
Metallized Polypropylene Film Capacitors
General Specifications
The 704M series is designed and manufactured for use in demanding audio applications where the highest quality, most
reliable film capacitor is required. They are non-inductively wound using the most reliable metallized polypropylene
film available.
Operating Temperature Range:
AC Voltage Life Test:
Standard operating temperature range is –55C
to +85C. Units may be operated at the full rated
voltage within this temperature range.
Minimum of 1000 hours at +85C at 60 Hz. AC
test voltage applied at 110% of rated AC voltage.
After test; capacitance shall not have changed by
more than 5% of initial value, insulation
resistance shall not have decreased by more than
50% of initial value and dissipation factor shall
not have changed by more than 0.03%. In
addition, there shall be no open or short circuits,
and no sign of visible damage. All measurements
made at 1 KHz.
The 704M series may be operated up to a
maximum temperature of +105C, however
the voltage must be linearly de-rated to 50%
of the full rated voltage at +105C.
Dielectric Withstanding Voltage:
Units shall withstand a DC potential of 200%
of rated voltage applied between terminals for
not more than 2 minutes.
Lead Bend Test:
After 3 consecutive 180 bends. No damage.
Lead Pull Test:
5 pounds (2.3 Kg) for one minute on lead axis.
No damage.
Humidity Testing:
Units subjected to 95% relative humidity for 250
hours with no voltage applied at +40C. After
4 hours of drying, minimum product of insulation
resistance and capacitance shall be 40,000 M-F,
but need not exceed 80,000 M at +25C.
DC Voltage Life Test:
1000 hours at +85C at 150% of rated voltage. After
test; capacitance shall not have changed by more
than 2% of initial value, insulation resistance shall
not have decreased by more than 50% of initial value
and dissipation factor shall not have increased to
more than 0.1%. In addition, there shall be no open
or short circuits, and no sign of visible damage.
SB Electronics
Dielectric Material/Construction:
The 704M series is manufactured using metallized
polypropylene film as the dielectric. The
capacitor element is non-inductively wound in a
single section design.
Metallized polypropylene film utilizes a base film
of polypropylene with a thin layer of aluminum
vacuum deposited directly on the film as the
electrode.
Metallized film exhibits a characteristic called
“self-healing” or “self-clearing”, which is the
ability to remove a fault or short circuit in the
dielectric film by vaporizing (from high current
density) the metallization near the defect. The
metallization is so thin that negligible film damage
occurs during the clearing process. The vaporized
metal oxidizes over time, aiding in the isolation of
a fault area.
Additional Testing Notes:
Since it is not possible to list every detail of
testing we perform we strongly encourage you to
contact us with any specific question or
requirement you may have. Thank you.
Dimensions are in inches, millimeters in parentheses
Tel: 802-476-4146  Fax: 802-476-4149
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830