Metallized Polypropylene Film Capacitor Box Type - Class X2 MP2X Series Metallized Polypropylene Film Capacitor Box Type - Class X2 Features Interference suppression capacitors Withstanding overvoltage stressing Excellent active and passive flame resistant abilities Widely used in across-the-line, interference suppression circuit, etc. RoHS compliant. Specification Description Symbol Reference Standard TCL/TCU/Day/ Flammability Class Class Operation Temperature Range Capacitance Range Capacitance Tolerance Rated Voltage Mains Voltage Applied to Max. Continuous DC Voltage Max Dissipation Factor Insulation Resistance UR 50/60Hz 305/275VAC Mains voltage can’t be higher than 250Vac 50/60Hz UDC Between Terminals To Case 0.0010µF≤CR<0.010µF 0.010µF≤CR<0.47µF 0.47µF≤CR≤1.0µF 1.0µF<CR≤10.0µF 10.0µF<CR≤50.0µF 0.0010µF≤CR<0.010µF 0.010µF≤CR<0.47µF 0.47µF≤CR≤1.0µF CR≤0.33µF CR>0.33µF 40/110/56/B X2 -40 ~ +110 ˚C 0.001µF ~ 25.0µF ±10%(K), ±20%(M) TOP CR Between Terminals UOL tan δ RINS Rated Voltage Pulse Slope UR=275/305VAC dv/dt If working voltage(U) is lower than UR dv/dt(Max) =dv/dt(Rated) * UR /U 630VDC 2000VDC 1800VDC 2s, CR≤1.0µF, 2s, CR>1.0µF 2120 VAC 60s 0.2% 0.1% 0.2% 0.3% 0.4% 0.2% 0.2% 0.4% ≥15,000MΩ ≥5,000s 500 (V/us) 500 (V/us) 400 (V/us) 200 (V/us) 150 (V/us) 100 (V/us) TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-TAITRON Fax: (800)-TAITFAX (800)-824-8766 (800)-824-8329 Conditions GB/T 14472 (IEC 60384-14) Climatic Category/Passive Flammability Class Withstanding Test Voltage Value (661)-257-6060 (661)-257-6415 1KHz, 20˚C 10KHz, 20˚C 20˚C, 100V, 60s P=7.5mm P=10.0mm P=1.0mm P=22.5mm P=27.5mm P=37.5mm Rev. E/NX Page 1 of 12 Metallized Polypropylene Film Capacitor Box Type - Class X2 MP2X Series X2 Radial Capacitor Performance No. Item 1 Solderability Performance Good quality of tinning Test Method (IEC 60384-14) Solder temperature: 245°C ±5°C Immersion time: 2.0s±0.5s Tense: 0.50<d≤0.80, 10N 2 Terminal strength 3 Resistance to solder heat There shall be no visible damage 0.80<d≤1.25, 20N Bend: 0.50<d≤0.80, 5N 0.80<d≤1.25, 10N The terminals shall be bent 2 times in each direction There shall be no visible damage Solder temperature:260°C±5°C ΔC/C ≤±5%(relative to the initial value) Immersion time: 10s±1s Solvent: Industrial isopropanol. 4 Solvent resistance of the marking The marking shall be legible Rapid change of temperature There shall be no evidence of deterioration. Vibration There shall be no evidence of deterioration. Bump There shall be no evidence of deterioration. 5 Final measurement Solvent temperature:23°C±5°C Dipping time: 5min±0.5min Condition: scrub Scrub material: absorbent cotton Reverting time: No θA=-40°C, θB =+110°C 5 cycles Duration: t=30min Amplitude 0.75mm or acceleration 100m/s2 (whichever is the smaller severity), f: 10Hz to 500Hz.Three directions, 2h for each direction, total 6h. 4 000 times, 2 Acceleration: 400m/s , Pulse duration, 6ms There shall be no visible damage ΔC/C ≤±5%(relative to the initial value) There shall be no visible damage, 6 Climate sequence legible marking ΔC/C ≤±5%(relative to the initial value) Dissipation Factor: tan δ≤0.008 (10kHz, CR≤1μF) tan δ≤0.005 (1kHz, CR>1μF) Dielectric strength : there shall be no permanent breakdown or flashover I.R.: ≥ 50% of the rated value +110℃, 16h Test Db, Severity: b, the first cycle -40℃, 2h Test Db, Severity b, the other cycles, Rev. E/NX www.taitroncomponents.com Page 2 of 12 Metallized Polypropylene Film Capacitor Box Type - Class X2 MP2X Series X2 Radial Capacitor No. 7 Item Damp heat steady state Performance There shall be no visible damage, legible marking ΔC/C ≤±5%(relative to the initial value) Dissipation Factor: tan δ≤0.008 (10kHz, CR≤1μF) tan δ≤0.005 (1kHz, CR>1μF) Dielectric strength : there shall be no permanent breakdown or flashover Test Method (IEC 60384-14) Temperature:40°C ±2°C Humidity: %RH Duration: 56 days I.R.: ≥ 50% of the rated value 8 Impulse voltage There are three or more waveforms which indicate that no self-heating breakdown have occurred when it is monitored by the monitor Each individual capacitor shall be subjected to 24 impulses of the same polarity (when any three successive impulses are shown by the monitor to have a wave form indicating that no selfhealing breakdown have taken place the impulses can be stopped), the time between impulses shall not be less than 10S, and the peak value of the voltage impulse: 2.5kV(suitable for CR≤1μF; When CR>1μF, the capacitor can endure pulse voltage value is 2.5/√CRkV) There shall be no visible damage, 9 Endurance legible marking ΔC/C≤±10%(relative to the initial value) Dissipation Factor: tan δ≤0.008 (10kHz, CR≤1μF) tan δ≤0.005 (1kHz, CR>1μF) Dielectric strength : There shall be no breakdown or flashover I.R. : ≥ 50% of the rated value +110°C, 1.25URVa.c., 1 000h The voltage shall be subjected to 1000Vrms for 0.1s every one hour during test. Rev. E/NX www.taitroncomponents.com Page 3 of 12 Metallized Polypropylene Film Capacitor Box Type - Class X2 MP2X Series X2 Radial Capacitor No. Item Performance Test Method (IEC 60384-14) Times: 10 000 Duration of charging: 0.5s Duration of discharging: 0.5s Charging voltage: √2UR Vd.c. 10 Charging and discharging ΔC/C ≤±10%(relative to the initial value) Dissipation Factor: tan δ≤0.008 (10kHz, CR≤1μF) tan δ≤0.005 (1kHz, CR>1μF) Charging resistance: 220/CR(Ω) or the current ≤1.0A (whichever is the minor) Discharging resistance: I.R.: ≥ 50% of the rated value CR: Capacitance (μF) dU/dt(V/us) : 100V/μs Ref.item 4.17 11 Passive flammability The flaming time of each capacitor shall not go beyond 10s after it is taken apart from the flame. Drop of each capacitor caused by flame shall not fire the tissue below. Needle flame test The category of flammability: B Expose time: 1 time Capacitor Volume Exposing time 3 250<V(mm )≤500 20s 3 500<V(mm )≤1750 30s 3 V(mm )>1750 12 Active flammability The cheese cloth around the capacitor shall not burn with a flame. 60s The specimens shall be individually wrapped in at least 1,but not more than 2,complete layers of cheesecloth, the cheesecloth shall be untreated pure cotton cloth. Each sample shall be subjected to 20 discharged, the interval between successive discharges shall be 5s. UR be applied and be maintained for s after the last discharge. Rev. E/NX www.taitroncomponents.com Page 4 of 12 Metallized Polypropylene Film Capacitor Box Type - Class X2 MP2X Series X2 Radial Capacitor Dimensions (in mm) L=standard lead length (18mm~26mm). Marking: MKP62 X2 ###* 275~ 40/110/56/B ENCE, CQC, UL PN MP2X102*305AC-10.5P7.5S MP2X122*305AC-10.5P7.5S MP2X152*305AC-10.5P7.5S MP2X182*305AC-10.5P7.5S MP2X222*305AC-10.5P7.5S MP2X272*305AC-10.5P7.5S MP2X332*305AC-10.5P7.5S MP2X392*305AC-10.5P7.5S MP2X472*305AC-10.5P7.5S MP2X562*305AC-10.5P7.5S MP2X682*305AC-10.5P7.5S MP2X822*305AC-10.5P7.5S MP2X103*305AC-10.5P7.5S MP2X123*305AC-10.5P7.5S MP2X153*305AC-10.5P7.5S MP2X183*305AC-10.5P7.5S MP2X223*305AC-10.5P7.5S MP2X273*305AC-10.5P7.5S MP2X333*305AC-10.5P7.5S MP2X393*305AC-10.5P7.5S MP2X473*305AC-10.5P7.5S MP2X473K305AC-18P15S MP2X563*305AC-10.5P7.5S MP2X563*305AC-13P10S MP2X683*305AC-10.5P7.5S MP2X683*305AC-13P10S MP2X823*305AC-13P10S MP2X104K305AC-13P10S MP2X104M305AC-13P10S MP2X124*305AC-13P10S MP2X154*305AC-13P10S Cap (μF) W ±0.4 H ±0.4 P ±0.4 T ±0.4 d ±0.05 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 18.0 10.5 13.0 10.5 13.0 13.0 13.0 13.0 13.0 13.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 11.0 11.0 11.0 11.0 12.0 11.0 12.0 11.0 11.0 12.0 11.0 13.0 13.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 15.0 7.5 10.0 7.5 10.0 10.0 10.0 10.0 10.0 10.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 6.0 5.0 6.0 5.0 5.0 6.0 5.0 7.0 7.0 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.047 0.056 0.068 0.082 0.10 0.12 0.15 Rev. E/NX www.taitroncomponents.com Page 5 of 12 Metallized Polypropylene Film Capacitor Box Type - Class X2 MP2X Series X2 Radial Capacitor PN MP2X184*305AC-13P10S MP2X224M305AC-13P10S MP2X224K305AC-17.5P15S MP2X224K305AC-26.5P22.5S MP2X274*305AC-17.5P15S MP2X334K305AC-17.5P15S MP2X334M305AC-17.5P15S MP2X394*305AC-17.5P15S MP2X474K305AC-17.5P15S MP2X474M305AC-17.5P15S MP2X474*305AC-32P27.5S MP2X564*305AC-17.5P15S MP2X604*305AC-17.5P15S MP2X684*305AC-17.5P15S MP2X684K305AC-32P27.5S MP2X824M305AC-17.5P15S MP2X824*305AC-32P27.5S MP2X105*305AC-26.5P22.5S MP2X125*305AC-26.5P22.5S MP2X155K305AC-26.5P22.5S MP2X155M305AC-26.5P22.5S MP2X185*305AC-26.5P22.5S MP2X225*305AC-26.5P22.5S MP2X275*305AC-32P27.5S MP2X335*305AC-32P27.5S MP2X395*305AC-32P27.5S MP2X475*305AC-32P27.5S MP2X565*305AC-32P27.5S MP2X685M305AC-32P27.5S MP2X685*305AC-41P37.5S MP2X825*305AC-41P37.5S MP2X106K305AC-41P37.5S MP2X106M305AC-41P37.5S MP2X126*305AC-41P37.5S MP2X156*305AC-42P37.5S MP2X206*305AC-42P37.5S MP2X256*305AC-57P52.5S Cap (μF) W ±0.4 H ±0.4 P ±0.4 T ±0.4 d ±0.05 0.18 13.0 13.0 17.5 26.5 17.5 17.5 17.5 17.5 17.5 17.5 32.0 17.5 17.5 17.5 32.0 17.5 32.0 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 41.0 41.0 41.0 41.0 41.0 42.0 42.0 57.0 14.0 14.0 13.5 16.5 13.5 14.0 13.5 14.5 16.0 14.5 20.0 16.0 19.0 19.0 20.0 19.0 18.0 18.5 20.0 22.0 20.0 24.5 24.5 28.0 30.0 33.0 30.0 37.0 37.0 33.5 37.0 41.0 37.0 43.0 45.0 57.0 50.0 10.0 10.0 15.0 22.5 15.0 15.0 15.0 15.0 15.0 15.0 27.5 15.0 15.0 15.0 27.5 15.0 27.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 52.5 8.0 8.0 7.5 7.0 7.5 8.0 7.5 8.5 10.0 8.5 11.0 10.0 11.0 11.0 11.0 11.0 9.0 10.0 11.0 12.0 11.0 15.5 15.5 14.0 16.0 18.0 21.0 22.0 22.0 18.5 22.0 26.0 22.0 28.0 30.0 30.0 35.0 0.6 0.6 0.6 0.8 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 0.22 0.27 0.33 0.39 0.47 0.56 0.60 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 20.0 25.0 Note: * = capacitance tolerance code, M=±20%, K=±10%, ### = capacitance value code Not for use in series with the mains. Rev. E/NX www.taitroncomponents.com Page 6 of 12 Metallized Polypropylene Film Capacitor Box Type - Class X2 MP2X Series X2 Radial Capacitor Packing Information (in mm) Fig 2 Fig 1 Code P=7.5 P=10.0 Fig 1 P=15.0 Fig 2 Tolerance P3 12.7 25.4 25.4 ±1.0 P0* 12.7 12.7 12.7 ±0.2 P1 2.60 7.7 5.2 ±0.7 P2 6.35 12.7 12.7 F** 7.5 10.0 15.0 △S 0 0 0 ±1.3 +0.6 -0.1 ±2.0 H*** 18.5 18.5 18.5 W 18.0 18.0 18.0 W0 12min 12min 12min ±0.5 +1.0 -0.5 —— W1 9.0 9.0 9.0 ±0.5 W2 1.5max 1.5max 1.5max —— D0 4.0 4.0 4.0 ±0.2 t 0.7 0.7 0.9 ±0.2 Note: * P0=15mm is also available ** F can be other lead spacing ***H=16.5mm is available Rev. E/NX www.taitroncomponents.com Page 7 of 12 Metallized Polypropylene Film Capacitor Box Type - Class X2 MP2X Series X2 Radial Capacitor Packing Specification 1. Carton for bulk 2. Box for bulk 3. Box for Ammo How to Order MP2X 474 K 305AC - 17.5P15 S-XX-BL Packing BL: Bulk with RoHS, Standard; AR: Tape and Ammo; RoHS Factory Location Code Lead Style S: Straight Lead; K: Kink Lead S45: Lead Length 4.5mm Dimension ( WxP, mm) 17.5P15: 17.5x15 AC Voltage 305AC: 305VAC; 275AC: 275VAC; Capacitance Tolerance K: ±10%; M: ±20% Capacitance Code 4 Example: 474=47x10 pF=0.47µF Taitron Metallized Polypropylene Film Radial Capacitor – Class X2 Rev. E/NX www.taitroncomponents.com Page 8 of 12 Metallized Polypropylene Film Capacitor Box Type - Class X2 MP2X Series X2 Radial Capacitor RoHS Test Report Rev. E/NX www.taitroncomponents.com Page 9 of 12 Metallized Polypropylene Film Capacitor Box Type - Class X2 MP2X Series X2 Radial Capacitor Rev. E/NX www.taitroncomponents.com Page 10 of 12 Metallized Polypropylene Film Capacitor Box Type - Class X2 MP2X Series X2 Radial Capacitor Rev. E/NX www.taitroncomponents.com Page 11 of 12 Metallized Polypropylene Film Capacitor Box Type - Class X2 MP2X Series X2 Radial Capacitor How to contact us USA HEADQUARTERS 28040 WEST HARRISON PARKWAY, VALENCIA, CA 91355-4162 Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060 Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415 Email: [email protected] Http://www.taitroncomponents.com TAITRON COMPONENTS INCORPORATED TAIWAN BRANCH 6F., NO.190, SEC. 2, ZHONGXING RD., XINDIAN DIST., NEW TAIPEI CITY 23146, TAIWAN R.O.C. Tel: 886-2-2913-6238 Fax: 886-2-2913-6239 TAITRON COMPONENT TECHNOLOG SHANGHAI CORPORATION SUITE 1503, METROBANK PLAZA, 1160 WEST YAN’AN ROAD, SHANGHAI, 200052, CHINA Tel: +86-21-5424-9942 Fax: +86-21-2302-5027 Rev. E/NX www.taitroncomponents.com Page 12 of 12