Types LC EIA Class 3, Semiconductor Type Reduced Titanite Disc Ceramic Capacitors EIA Class 3 reduced titanite disc ceramic capacitors are ideal for use in transistorized circuity for bypass and coupling applications. Highlights TE High Capacitance Low power factor Superior radio frequency impedance Meets RS-198C for Class 3 ceramic capacitors Radial leads Specifications Ratings Catalog Temp. Part Number Tol. l. Size C Coef. O Cap .01 to .10 µF 25 Vdc ±20% –30 ºC to +85 ºC 1 megohm minimum 2.5 x rated (5 seconds Max.) 1.5% Max. @ 1 KHz 1.0 inch minimum LE Capacitance Range: Voltage Range: Tolerance: Operating Temperature Range: Insulation Resistance: Breakdown Voltage: ltage: Power Factor: Lead Length: D (±) (µF) LC103M* .100 LC104M* S d D (Inches) T S d (Millimeters) 25 Vdc 20% Y5R** .235 .138 .250 .025 6.0 3.5 6.4 .6 20% Y5R** .495 .138 .250 .025 12.6 3.5 6.4 .6 BS .010 T Size *available only until stock is depleted deplete **maximum capacitance change over temperature rating: ±15% Physical Specifications Case: Conformal Coating O Lead material: Tinned copper wire. (Minimum lead content: 5%) Tape and Reel Available upon Request < Leads are formed to .200 (5.0mm) lead spacing For D less than .315 (8.0mm) - Quantity/Reel = 2500 pcs Tape and reel not available for greater than .472” (12mm) CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com