CERAMIC CAPACITORS 3 & 4 Series: Semi-Conducting & Spark Gap CLASS 3 (SEMI-CONDUCTING) SPECIFICATIONS INTRODUCTION Single layer metalized ceramic disc with resin coating (wax impregnated). Common Usage: •Transistorized Circuits •Low Voltage-by-pass, Coupling. •Frequency determination where Dielectric losses, Hi-IR and Cap. stability are not of Technical Data Capacitance Range Dissipation Factor (DF) Condition Measured at 2KHZ 0.1Vrms at 25°C Specificaiton Encapsulation Standard Insulation Resistance Apply reated voltage for 1 minute at 1GW or 20WF whichever 25±2°C and 70% R.H. is less 16 Vdc product has 25 Vdc applied 0.01mF-0.47mF 8.0% max Phenolic Resin (wax impregnated) PART NUMBER EXAMPLE 3 YV 473 M 120 A54 B DIMENSIONS (mm) Maximum Disc Diameter (F:Standard Lead Spacing. Other lead spacing may be available upon request.) Cap (mF) Voltage Code 0.01 103 0.022 233 0.033 333 0.047 473 0.068 683 0.1 104 0.22 224 0.47 474 12V, 16V YU YV 25V YP YU 4.5 F=5.0 4.5 F=5.0 7 F=5.0 7 F=5.0 7 F=5.0 9 F=6.35 9 F=6.35 11 F=6.35 50V YV YP YU 4.5 F=5.0 5.5 F=5.0 7 F=5.0 4.5 F=5.0 7 F=5.0 9 F=6.35 8 F=5.0 6 F=5.0 YV 4.5 F=5.0 Disc 3mm max 20mm min Diameter (D) 5.5 F=5.0 7 F=5.0 ±0.05 mm(d) 13.5 F=9.5 9 F=6.35 5mm ±1mm 7 F=5.0 CLASS 4 (SPARK GAP) INTRODUCTION SPECIFICATIONS Spark Gap capacitors are designed to provide a reliable discharge path for stray, transient overvoltages and static voltage build-up. The construction of spark gap may enable the circuit designer to reduce costs by specifying lower voltage components. Technical Data L Capacitance Dissipation Factor tan d Encapsulation Insulation Resistance D LS±1.0 Condiditon Measured at 1 KHZ, 1VRMS at 25°C Measured at 500 Vdc Operating Temperature Available Tolerances Specification 0.75pF ~ 0.02mF 2.5% max Phenolic Wax 7500MW or R x C > 75W x F +10 ~ +85°C, Z5U -30 ~ +85°C, Y5P ±10% (K) ±20% (M) Guarantied max value (U) Guarantied min value (V) DIMENSIONS (mm) Maximum Disc Diameter Cap .75pF .001mF .01mF .02mF Voltage Lead Spacing Diameter Length Thickness Code V (LS) (D) (L max) (T max) R75 1KV, 1.5KV, 2KV 6.35 9 13 6.35 102 2KV 9.50 12 26 6.35 103 1.5KV, 2KV, 2.5KV 9.50 20 26 6.35 203 1KV 9.50 24 27 6.35 PART NUMBER EXAMPLE 4 YP R75 V 102 A67 B RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1BE03 REV. 2005.3.7