Types LC EIA Class 3, Semiconductor Type Reduced Titanite Disc Ceramic Capacitors EIA Class 3 reduced titanite disc ceramic capacitors are ideal for use in transistorized circuity for bypass and coupling applications. Highlights Specifications Ratings • • • • • Capacitance Range: Voltage Range: Tolerance: Operating Temperature Range: Insulation Resistance: Breakdown Voltage: Power Factor: Lead Length: Catalog Cap .01 to .10 µF 25 Vdc ±20% –30 ºC to +85 ºC 1 megohm minimum 2.5 x rated (5 seconds Max.) 1.5% Max. @ 1 KHz 1.0 inch minimum Temp. Part Number (µF) High Capacitance Low power factor Superior radio frequency impedance Meets RS-198C for Class 3 ceramic capacitors Radial leads Tol. Size Coef. D (±) T Size S d D (Inches) T S d (Millimeters) 25 Vdc .010 LC103M 20% Y5R * .235 .138 .250 .025 6.0 3.5 6.4 .6 .100 LC104M 20% Y5R * .495 .138 .250 .025 12.6 3.5 6.4 .6 *maximum capacitance change over temperature rating: ±15% Physical Specifications Max Max Case: Conformal Coating Lead material: Tinned copper wire. (Minimum lead content: 5%) Tape and Reel Available upon Request Leads are formed to .200 (5.0mm) lead spacing For D less than .315 (8.0mm) - Quantity/Reel = 2500 pcs Coating on Leads: 0.08" (2mm) Max (� 500V Ratings) 0.118" (3mm) Max (500V Ratings) 0.16" (4mm) Max (� 1kV Ratings) 1" min L = (25.4 mm) Tape and reel not available for greater than .472” (12mm) S d CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com