Mounting Hardware for Screw-Terminal, Computer-Grade Capacitors Mounting Hardware FIGURE 1 FIGURE 2 FIGURE 4 Clamp Dimensions FIGURE 3 Aluminum Screw Terminal Computer Grade Clamp Number A 125364-01 125364-05 125364-02 125364-04 125364-03 125364-06 Dimensions in Inches B C D 1.375 1.750 2.000 2.500 3.000 3.500 2.125 2.500 2.750 3.250 3.750 4.250 2.500 2.875 3.125 3.625 4.125 4.625 1.281 1.656 1.906 2.406 2.906 3.481 Bracket Dimensions Dimensions in Inches A B C Figure Bracket Number 1 1 2 3 2 3 2 3 4 115058-06* 115058-15* 115058-09* 115058-05 115058-14* 115058-10 115058-11* 115058-01 125309-01 1.375 1.750 2.000 2.000 2.500 2.500 3.000 3.000 3.500 1.813 2.188 1.250 2.563 1.500 3.000 1.750 3.500 4.488 30° 30° 75° 30° 75° 30° 75° 30° 60° D 2.313 2.625 1.438 2.938 1.688 3.438 1.938 3.938 2.224 E .750 .750 1.125 1.125 1.125 1.125 1.125 1.125 .984 Dimensions in millimeters B C D E F A .563 .560 .750 .750 .750 .750 .750 .750 – 34.93 44.45 50.80 50.80 63.50 63.50 76.20 76.20 90.00 46.04 55.56 31.75 65.09 38.10 76.20 44.45 88.90 114.00 30° 30° 75° 30° 75° 30° 75° 30° 60° 58.74 66.68 36.51 76.41 42.86 87.31 49.21 100.01 4.70 19.05 19.05 28.58 28.58 28.58 28.58 28.58 28.58 25.00 F 14.30 14.22 19.05 19.05 19.05 19.05 19.05 19.05 – Note: All mounting brackets and clamps except Figure 4 are zinc plated. Figure 4 is black nylon. When mounting capacitors there is no need to wrap capacitors with protective wrapping before installing mounting clamp. * Stock bracket Nylon Nuts for Insulated Stud Mounting Mounting For Stud Standoff Nut Nut Hex Nylon Nut Diameter Diameter Diameter Elevation Head Min. Hole Max. Chassis Max. Tightening Part Number (mm) S (mm) W (mm) T (mm) J (mm) Diameter Thickness Torque M8S17W25 M8 17 25 M12S22W30 M12 22 M12S30W38 M12 30 CORNELL DUBILIER Your Source For Capacitor Solutions (mm) (mm) in. lbs. 14 17 17.5 5 25 30 16 19 22.5 5 75 38 16.5 19 30.5 5 75 140 Technology Place Liberty, SC 29657 (864) 843-2277, Fax (864) 843-3800 http://www.cornell-dubilier.com E-mail: [email protected] 2.053