Screw Terminal Mounting Hardware and Accessories Footed Bracket for types: 500C, 500R, 520C, 550C, 3186, 3188, 3191, 3198, 125, CGS, CGR, CGO, DCMC, HES VR6, 8,10 & 12 VR1, 3 & 4 Footed Bracket VR Series .219” CDE VR mounting clamps may be used to mount any cylindrical capacitor with a 1” to 3” diameter that is to be mounted in a vertical position. Material is 1010 CRS, commercial grade #4 temper ASI scale. Parts are finished with .0001 (nominal) zinc chromate plating. Use for mounting CG types, PSU, SF and MPF types. Material thickness is .035” .375” .562” .750” B Mtng ±0.03” Unassembled Assembled Screw & Nut with Mounted Screw & Nut Included Screw & Nut A B 0.075” ±0.016” 0.035” C 0.500” ±0.016” VR1B VR1 VR1A 1" 1-7/16" 1-7/8*" VR3B VR3 VR3A 1-3/8" 1-25/32" 2-7/32" 1-1/2" to 1-9/16 VR4B VR4 VR4A 1-1/2" 1-15/16" 2-11/32" 1-3/4" to 1-13/16 VR6B VR6 VR6A 1-3/4" 2-1/4" 2-9/16" VR8B VR8 VR8A 2" 2-1/2" 2-13/16" 2-1/2" to 2-9/16 VR10B VR10 VR10A 2-1/2" 3" 3-5/16" 3" to 3-1/8 VR12B VR12 VR12A 3" 3-7/16" 3-13/16" VRSCREW — — 9/16" long 6-32 thread NC-2A VRNUT — — Standard hex nut to fit screws Nut Ø 0.201” ±0.005” 1.125” ±0.016” 1-3/8" to 1-7/16 Screw 75 º A ±0.016” 0.375”±0.016” Dimensions Without 2" to 2-1/16 0.34 4 0.18 ” ±0.01 6 8” ± 0.01 ” 6” 120 º ±3 º (3 Places) 2 Holes .1561” Dia. of Part to be 1" to 1-1/16 0.176” x 0.281” ±0.016 (3 places). .156” B Mtg Catalog Part Number Diameter B Mtng ±0.03” C ±0.01” RoHS Compliant All brackets and hardware are RoHS Compliant Footed Bracket 125 Series Figure 2 Figure 3 Figure 1 Figure 4 Bracket Dimensions Dimensions in Inches Figure Bracket Dimensions in Millimeters A B C D E F A B C D E F Number 1 125565-06* 1.375 1.813 30 º 2.313 .750 .563 34.93 46.04 30º 58.74 19.05 14.30 1 125565-15* 1.750 2.188 30 º 2.625 .750 .560 44.45 55.56 30º 66.68 19.05 14.22 2 125565-09* 2.000 1.250 75 º 1.438 1.125 .750 50.80 31.75 75º 36.51 28.58 19.05 3 125565-05 2.000 2.563 30 º 2.938 1.125 .750 50.80 65.09 30º 76.41 28.58 19.05 2 125565-14* 2.500 1.500 75 º 1.688 1.125 .750 63.50 38.10 75º 42.86 28.58 19.05 3 125565-10 2.500 3.000 30 º 3.438 1.125 .750 63.50 76.20 30º 87.31 28.58 19.05 2 125565-11* 3.000 1.750 75 º 1.938 1.125 .750 76.20 44.45 75º 49.21 28.58 19.05 3 125565-01 3.000 3.500 30 º 3.938 1.125 .750 76.20 88.90 30º 100.01 28.58 19.05 4 125309-01 3.500 4.488 60 º 2.224 .984 – 90.00 114.00 60º 4.70 25.00 – Note: All mounting brackets and clamps except Figure 4 are zinc plated. Figure 4 is a black nylon. When mounting capacitors there is no need to wrap capacitors with protective wrapping before installing mounting clamp. *Stock bracket CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 Screw Terminal Mounting Hardware and Accessories Clamp Type Bracket Clamp Dimensions Clamp Dimensions in Inches Number A B C D 125562-01 1.375 2.125 2.500 1.281 125562-05 1.750 2.500 2.875 1.656 125562-02 2.000 2.750 3.125 1.906 125562-04 2.500 3.250 3.625 2.406 125562-03 3.000 3.750 4.125 2.906 125562-06 3.500 4.250 4.625 3.481 Nylon Nuts for Insulated Stud Mounting Nylon Hex Nut Metal Plate/ Heat Sink (Reference only) For Stud Standoff Nylon Nut Part Number Nut Nut Diameter Diameter Diameter Elevation Hex Mounting Head Min. Hole Max. Chassis Max. Tightening Diameter Thickness Torque (mm) S (mm) W (mm) T (mm) J (mm) (mm) (mm) in. lbs. M8S17W25 M8 17 25 15 17 17.5 5 25 M12S22W30 M12 22 30 18 19 22.5 5 75 M12S30W38 M12 30 38 18 19 30.5 5 75 CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800