Wire-wound Chip Inductors - Open Wound CT2214F & CT4015F Series From 1.65 nH to 12.55 nH www.ctparts.com PHYSICAL DIMENSIONS Size mm inches B C D E 2.20±0.3 1.40±0.2 1.40±0.2 1.80±0.3 0.09±0.012 0.05±0.008 0.05±0.008 0.07±0.012 Size mm inches CT2214F Series A CT4015F Series A B C D E 4.00±0.3 1.50±0.2 1.50±0.2 3.50±0.3 0.16±0.012 0.06±0.008 0.06±0.008 0.14±0.012 A 0.90±0.3 0.03±0.012 0.90±0.3 0.03±0.012 D B C E Not Shown at Actual Size Top View Side View Bottom View CHARACTERISTICS Description: SMD air coil inductor. Applications: Designed to operate a wide frequency range application. Also designed to operate in high Q applications. Operating Temperature: -40°C to 125°C Inductance Tolerance: ±5%, ±10% Testing: Inductance is tested on an HP4286A at 800MHz. Packaging: Tape & Reel Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. Size mm inches Part numbers indicate inductance tolerance available. J = ±5%, K = ±10% L Test Freq. Q (MHz) Min. SRF (GHz) Min. CT2214F-02K CT2214F-03K CT2214F-04K CT2214F-05J 1.65 2.55 3.85 5.45 800 800 800 800 100 100 100 100 3.0 3.0 3.0 3.0 CT4015F-06J CT4015F-07J CT4015F-08J CT4015F-09J CT4015F-10J 5.60 7.15 8.80 9.85 12.55 800 800 800 800 800 100 100 100 100 100 3.0 3.0 3.0 3.0 3.0 mm inches CT2214F Series F G H I J 1.0 2.5 2.6 1.0 0.8 0.04 0.10 0.102 0.04 0.03 F G I J Size SPECIFICATIONS Part Inductance Number (nH) pad layout CT4015F Series H 1.0 2.5 4.5 2.9 0.8 0.04 0.10 0.18 0.11 0.03 J F G I H Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2010 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 03.30.10