Wire-wound Chip Inductors - Open Wound CTAC0805F Series From 3.9nH to 33nH www.ctparts.com SPECIFICATIONS Parts are available in ±10% inductance tolerance only. Part Number CTAC0805F-3N9K CTAC0805F-4N7K CTAC0805F-5N6K CTAC0805F-6N8K CTAC0805F-8N2K CTAC0805F-10NK CTAC0805F-12NK CTAC0805F-15NK CTAC0805F-18NK CTAC0805F-22NK CTAC0805F-27NK CTAC0805F-33NK Test Freq. (MHz) 300 300 300 300 300 300 300 300 300 300 300 300 Inductance (nH) 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 Q Min. 80 80 80 80 80 70 70 70 70 70 70 70 SRF (MHz) Min. >3000 >3000 >3000 >3000 >3000 >3000 >3000 2500 2500 2400 1600 1600 DCR (mΩ) Max. 2.6 3.6 3.7 4.5 5.3 5.4 6.3 7.2 12.5 12.9 14.5 18.7 IDC (mA) Max. 1200 900 950 900 840 900 900 900 500 550 550 500 PHYSICAL DIMENSIONS Size mm inches A B C Max. Max. Max. 1.80 2.10 2.85 0.071 0.083 0.112 135° 2.5° Not Shown at Actual Size CHARACTERISTICS 180° B 7.5° Description: SMD air core inductor Applications: Pager, Cordless phone & High Freq. Communication Products, Intercom, CATV Operating Temperature: -25°C to +85°C Inductance Tolerance: ±10% Testing: Inductance is tested on a HP4286A at 300MHz Packaging: Tape & Reel. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. C A 0-0.3 PAD LAYOUT Unit: mm 1.02 Min. 0.76 Min. 1.02 Min. 1.78 Min. Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2015 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 06.03.15