Wire-wound Chip Inductors - Open Wound CTAC1008F Series From 6.8nH to 120nH www.ctparts.com SPECIFICATIONS Parts are available in ±10% inductance tolerance only. Part Inductance Number (nH) CTAC1008F-6N8K 6.8 CTAC1008F-8N2K 8.2 CTAC1008F-10NK 10 CTAC1008F-12NK 12 CTAC1008F-15NK 15 CTAC1008F-18NK 18 CTAC1008F-22NK 22 CTAC1008F-27NK 27 CTAC1008F-33NK 33 CTAC1008F-39NK 39 CTAC1008F-47NK 47 CTAC1008F-56NK 56 CTAC1008F-68NK 68 CTAC1008F-82NK 82 CTAC1008F-R10K 100 CTAC1008F-R12K 120 Test Freq. Q (MHz) Min. 300 80 300 80 300 70 300 70 300 70 300 70 300 70 300 70 300 70 300 70 300 70 300 70 300 70 300 70 300 70 300 70 SRF (MHz) Min. >3000 >3000 >3000 >3000 2500 2500 2400 1600 1600 1500 1500 1300 1300 1000 1000 950 DCR (mΩ) Max. 4.0 5.0 6.0 6.5 7.3 9.6 10.8 13.9 19.5 21.6 25.2 27.5 37.1 51.5 55.5 63.4 IDC (mA) Max. 1200 950 950 900 900 840 840 600 500 500 470 470 380 320 320 320 PHYSICAL DIMENSIONS Size mm inches A B C Max. Max. Max. 1.90 2.20 3.20 0.075 0.087 0.126 135° Not Shown at Actual Size 2.5° CHARACTERISTICS 180° B 7.5° Description: SMD air core inductor Applications: Pager, Cordless phone & High Freq. Communication Products, Intercom, CATV Operating Temperature: -25°C to +85°C Inductance Tolerance: ±10% Testing: Inductance is tested on a HP4286A at 300MHz Packaging: Tape & Reel. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. C A 0-0.3 PAD LAYOUT Unit: mm 1.02 Min. 1.27 Min. 1.02 Min. 2.54 Min. Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2011 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 08.11.11