1N4001G THRU 1N4007G

1N4001G THRU 1N4007G
1.0AMP .Glass Passivated Rectifiers
DO-41
FEATURE
.High current capability,
.Low forward voltage drop
.Low power loss, high efficiency
.High surge capability
.High temperature soldering guaranteed
260°C /1 0sec/0.375" lead length at 5 lbs tension
.787(20.0)
MIN.
.107(2.7)
.080(2.0)
+
.205(5.2)
.166(4.2)
MECHANICAL DATA
.Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
.Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
.Polarity: color band denotes cathode
.Mounting position: any
DIA.
.032(0.8)
.025(0.65)
.787(20.0)
MIN.
DIA
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYM
BOL
Type Number
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified
Current.375"(9.5mm) lead length @Ta =75°C
VRRM
VRMS
VDC
1N
4001G
50
1N
4002G
100
1N
4003G
200
1N
4004G
400
1N
4005G
600
1N
4006G
800
1N
4007G
units
1000
V
35
70
140
280
420
560
700
V
50
100
200
400
600
800
1000
V
IF(AV)
1.0
A
IFSM
30.0
A
VF
VF
1.1
V
1.3
V
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 1.0A DC
Maximum Forward Voltage at 3.0A DC
Maximum DC Reverse Current
Ta =25°C
at rated DC blocking voltage
Ta =125°C
Typical Junction Capacitance (Note)
Typical Thermal Resistance (Note 2)
Storage Temperature
Operation JunctionTemperature
5.0
VR
50.0
CJ
R(JA)
TSTG
TJ
15
pF
50
°C/W
-55 to +150
°C
-55 to +150
°C
Note:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient at 0.375"(9.5mm) lead length, vertical P.C. Board Mounted
- 317 -
µA
RATING AND CHARACTERISTIC CURVES (1N4001G THRU 1N4007G)
FIG.1-TYPICAL FORWARD CURRENT
DERATING CURVE
FIG.2-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
INSTANEOUS FORWARD
CURRENT,(A)
AVERGE FORWARD
RECTIFIED CURRENT,(A)
10.0
1.0
0.5
Single Phase Half Wave
60Hz Resistive or
inductive Load
0
0
50
100
150
1.0
TJ=25℃
Pulse Width=300μ s
1% Duty Cycle
.1
.01
200
.8
.5
1.1
1.7
1.4
INSTANEOUS FORWARD
VOLTAGE,(V)
AMBIENT TEMPERTURE,( ℃ )
FIG.4-TYPICAL REVERSE
CHARACTERISTICS
FIG.3-MAXIMUN NON-REPETITIVE
FORWARD SURGE CURRENT
40
8.3ms Single Half
Sine-Wave (JEDEC
Method)
30
INSTANEOUS REVERSE
CURRENT,(μA)
PEAK FORWARD SURGE
CURRENT,(A)
100
20
10
10
1
TJ=25℃
0
0
10
100
NUMBER OF CYCLES AT 60Hz
.1
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE,(%)
- 318 -