N-Channel JFET Switch LLC J108 – J110 / SST108 – SST110 FEATURES Low Cost Automated Insertion Package Low Insertion Loss No Offset or Error Voltages Generated by Closed Switch Purely Resistive High Isolation Resistance from Driver Fast Switching Low Noise • • • • • • PIN CONFIGURATION SOT-23 TO-92 D S 5018 • • • • ABSOLUTE MAXIMUM RATINGS (TA = 25oC unless otherwise specified) Gate-Drain or Gate-Source Voltage . . . . . . . . . . . . . . . . -25V Gate Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA Storage Temperature Range . . . . . . . . . . . . . -55oC to +150oC Operating Temperature Range . . . . . . . . . . . -55oC to +135oC Lead Temperature (Soldering, 10sec) . . . . . . . . . . . . . +300oC Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360mW Derate above 25oC . . . . . . . . . . . . . . . . . . . . . . . 3.3mW/ oC NOTE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. G G D S APPLICATIONS Analog Switches Choppers Commutators Low-Noise Audio Amplifiers PRODUCT MARKING (SOT-23) SST108 I08 SST109 I09 SST110 I10 ORDERING INFORMATION Part Package J108-110 Plastic TO-92 XJ108-110 Sorted Chips in Carriers SST109-110 Plastic SOT-23 Temperature Range -55oC to +135oC -55oC to +135oC -55oC to +135oC ELECTRICAL CHARACTERISTICS (TA = 25oC unless otherwise specified) SYMBOL 108 109 110 UNITS MIN TYP MAX MIN TYP MAX MIN TYP MAX -3 -3 -3 nA -3 -10 -2 -6 -0.5 -4 V -25 -25 -25 80 40 10 mA 3 3 3 nA 8 12 18 Ω 15 15 15 PARAMETER IGSS VGS(off) BVGSS IDSS ID(off) rDS(on) Cdg(off) Gate Reverse Current (Note 1) Gate-Source Cutoff Voltage Gate-Source Breakdown Voltage Drain Saturation Current (Note 2) Drain Cutoff Current (Note 1) Drain-Source ON Resistance Drain-Gate OFF Capacitance Csg(off) Source-Gate OFF Capacitance Cdg(on) + Csg(on) td(on) tr td(off) Drain-Gate Plus Source-Gate ON Capacitance Turn On Delay Time Rise Time Turn OFF Delay Time tf Fall Time 15 15 15 85 85 85 4 1 6 4 1 6 4 1 6 30 30 30 pF ns TEST CONDITIONS VDS = 0V, VGS = -15V VDS = 5V, ID = 1µA VDS = 0V, IG = -1µA VDS = 15V, VGS = 0V VDS = 5V, VGS = -10V VDS ≤0.1V, VGS = 0V VDS = 0, VGS = -10V (Note 3) f = 1MHz VDS = VGS = 0 (Note 3) Switching Time Test Conditions (Note 3) J107 J109 J110 VDD 1.5V 1.5V 1.5V VGS(off) -12V -7V -5V RL 150Ω 150Ω 150Ω o NOTES: 1. Approximately doubles for every 10 C increase in TA. 2. Pulse test duration = 300µs; duty cycle ≤3%. 3. For design reference only, not 100% tested. CALOGIC LLC, 237 WHITNEY PLACE, FREMONT, CA 94539, 510-656-2900 PHONE, 510-651-1076 FAX DS038 REV A