N-Channel JFET Switch CORPORATION 2N4391 – 2N4393 / PN4391 – PN4393 / SST4391 – SST4393 FEATURES • rds(on)<300 Ohms (2N4391) • ID(OFF)<100pA • Switches ±10VAC With ±15V Supplies (4392, 4393) PIN CONFIGURATION TO - 92 TO-92 TO-18 ABSOLUTE MAXIMUM RATINGS (TA = 25oC unless otherwise noted) Gate-Source or Gate-Drain Voltage . . . . . . . . . . . . . . . . -40V Gate Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mA Storage Temperature Range . . . . . . . . . . . . . -65oC to +200oC Operating Temperature Range . . . . . . . . . . . -55oC to +200oC Lead Temperature (Soldering, 10sec) . . . . . . . . . . . . . +300oC TO-18 TO-92 SOT-23 Power Dissipation 1.8W 360mW 350mW Derate above 25oC 10mW/ oC 3.3mW/ oC 2.8mW/ oC Plastic Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to +150oC Operating . . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to +135oC NOTE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. G,C G S D G D S S D 5001 SOT-23 G D S PRODUCT MARKING (SOT-23) SST4391 N01 SST4392 N02 SST4393 N03 ORDERING INFORMATION Part Package 2N4391/93 PN4391/93 SST4391/93 X2N4391/93 Hermetic TO-18 Plastic TO-92 Plastic SOT-23 Sorted Chips in Carriers Temperature Range -55oC to +200oC -55oC to +135oC -55oC to +135oC -55oC to +200oC 2N4391 – 2N4393 / PN4391 – PN4393 SST4391 – SST4393 CORPORATION ELECTRICAL CHARACTERISTICS (TA = 25oC unless otherwise specified) SYMBOL IGSS BVGSS PARAMETER 4391 4392 MIN MAX MIN MAX MIN MAX UNITS -100 -100 -100 pA -200 -200 -200 nA Gate Reverse Current Gate-Source Breakdown Voltage TEST CONDITIONS VGS = -20V, VDS = 0 -40 -40 100 ID(off) 4393 -40 100 V 100 IG = -1µA, VDS = 0 VGS = -5V (4393) pA Drain Cutoff Current VGS = -7V (4392) VDS = 20V 200 200 200 1 1 1 VGS = -12V (4391) nA TA = 150 oC VGS(f) Gate-Source Forward Voltage VGS(off) Gate-Source Cutoff Voltage -4 -10 -2 -5 -0.5 -3 IDSS Saturation Drain Current (Note 1) 50 150 25 75 5 30 mA VDS(on) Drain-Source ON Voltage 0.4 0.4 0.4 V rDS(on) Static Drain-Source ON Resistance 30 60 100 rds(on) Drain-Source ON Resistance 30 60 100 VGS = 0, I D = 0 Ciss Common-Source Input Capacitance (Note 2) 14 14 14 VDS = 20V, VGS = 0 Crss Common-Source Reverse Transfer Capacitance (Note 2) V 3.5 IG = 1mA, VDS = 0 VDS = 20V, ID = 1nA Ω VDS = 20V, VGS = 0 ID = 3mA (4393) ID = 6mA (4392) ID = 12mA (4391) VGS = 0 VGS = 0, I D = 1mA f = 1kHz VGS = -5V pF VDS = 0 3.5 3.5 VGS = -7V VGS = -12V td Turn-ON Delay Time (Note 2) 15 15 15 tr Rise Time (Note 2) 5 5 5 toff Turn-OFF Delay Time (Note 2) 20 35 50 tf Fall Time (Note 2) 15 20 30 VDD = 10V, VGS(on) = 0 ns 4391 4392 4393 ID(on) 12mA 6 3 NOTES: 1. Pulse test required, pulse width = 300µs, duty cycle ≤3%. 2. For design reference only, not 100% tested. SWITCHING TIMES TEST CIRCUIT RL 51Ω VDD D PULSE IN 1 kΩ 1000pF VIN SCOPE TA = 150 oC 51Ω VOUT 51Ω RL = 9.6 ID(ON) - 51Ω 0010 VGS(off) -12V -7 -5 f = 1MHz