MBR3030PT THRU MBR30100PT SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 30 to 100 Volts Forward Current - 30.0 Ampere FEATURES TO-3P ● Plastic package has Underwriters Laboratory Flammability 15.8± 0.2 5.0± 0.15 4.9± 0.25 6.5± 0.3 Classification 94V-0 Dual rectifier construction, positive center tap Metal silicon junction, majority carrier conduction Low power loss, high efficiency Guardring for overvoltage protection For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications 8.0± 0.2 2.0± 0.15 3.6± 0.15 21± 0.5 ● ● ● ● ● PIN 1 MECHANICAL DATA 3 2 2.4± 0.2 20.4± 0.4 Case: TO-3P, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-750, Method 2026 Polarity: See Diagram Weight: 5.6 grams (approx.) Mounting Position: Any Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. 2.2± 0.15 3.0± 0.1 1.2± 0.15 0.6± 0.1 5.4± 0.15 Dimensions in millimeters + PIN 1 PIN 3 - Maximum Ratings and Electrical Characteristics Case, PIN 2 @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current MBR MBR MBR MBR MBR MBR MBR MBR Unit VRRM VRWM VR 30 35 40 45 50 60 80 100 V VR(RMS) 21 25 28 32 35 42 56 70 V Symbol 3030PT 3035PT 3040PT 3045PT 3050PT 3060PT 3080PT 30100PT IO 30 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 275 A Forward Voltage @IF = 15A VFM @TA = 25°C @TA = 100°C IRM 1.0 60 mA Cj 1100 pF R�JC 1.4 °C/W Tj, TSTG -65 to +150 °C Peak Reverse Current At Rated DC Blocking Voltage @TC = 95°C Typical Junction Capacitance (Note 1) Typical Thermal Resistance Junction to Case (Note 2) Operating and Storage Temperature Range Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Thermal resistance junction to case mounted on heatsink. 0.55 0.65 0.85 V MBR3030PT THRU MBR30100PT RATINGS AND CHARACTERISTIC CURVES 40 24 18 12 6 Single Pulse Half-Wave 60 Hz Resistive or Inductive Load 0 10 40 60 80 100 120 140150 IF, NSTA NTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE OUTPUT CURRENT (A) 30 3030PT ~ 3045PT 20 3050PT ~ 3060PT 3080PT ~ 30100PT 10 Tj = 25ºC Pulse Width = 300 µs 2% Duty Cycle 1 0 TC, CASE TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve 0.50 0.75 1.00 1.25 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 2000 300 Tj = 25ºC f = 1MHz 240 Cj, CA PACITANCE (p F) IFSM , PEAK FORWARD SURGE CURRENT (A) 0.25 180 120 1000 60 8.3ms Single Half Sine-Wave JEDEC Method 0 1 10 100 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Peak Fwd Surge Current 0.1 1.0 10 VR , REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 100