MBRF20150CT THRU MBRF20200CT SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 150 to 200 Volts Forward Current - 20.0 Ampere FEATURES ITO-220AB ● Plastic package has Underwriters Laboratory Flammability ● ● ● ● ● Classification 94V-0 Dual rectifier construction, positive center tap Metal silicon junction, majority carrier conduction Low power loss, high efficiency Guardring for overvoltage protection For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications .406(10.3) .386(9.8) ● Case: JEDEC ITO-220AB molded plastic body ● Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 ● High temperature soldering guaranteed: 250 oC/10 seconds, 0.25" (6.35mm) from case ● Polarity: As marked ● Mounting Position: Any ● Mounting Torque: 10 in-lbs maximum ● Weight: 0.08 ounce, 2.24 grams .189(4.8) .173(4.4) .118(3.0) .106(2.7) .610(15.5) .571(14.5) .157(4.0) .142(3.6) MECHANICAL DATA .138(3.5) .122(3.1) .118(3.0) .102(2.6) .071(1.8) .055(1.4) .571(14.5) .531(13.5) .059(1.5) .043(1.1) .030(0.76) .020(0.51) .112(2.84) .088(2.24) .114(2.9) .098(2.5) .030(0.76) .020(0.51) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics PIN 1 - + PIN 3 - PIN 2 @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current MBRF20150CT MBRF20200CT Unit VRRM VRWM VR 150 200 V VR(RMS) 105 140 V IO 20 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 200 A Forward Voltage @IF = 10A VFM 0.92 V @TA = 25°C @TA = 100°C IRM 0.5 100 mA Cj 1100 pF Tj, TSTG -65 to +150 °C Peak Reverse Current At Rated DC Blocking Voltage @TC = 95°C Symbol Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. MBRF20150CT THRU MBRF20200CT RATINGS AND CHARACTERISTIC CURVES 15 10 5 Single Phase Half-Wave 60 Hz Resistive or Inductive Load 9.5mm Lead Length 0 10 50 100 150 IF, INSTA NTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE OUTPUT CURRENT (A) 20 30 10 1.0 Tj = 25ºC Pulse Width = 300µs 2% Duty Cycle 0.1 0.1 0.5 0.7 0.9 1.1 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Voltage Characteristics TC, CASE TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve 200 10000 Tj = 25ºC f = 1MHz Cj, JUNCTION CAPACITANCE (pF) IFSM , PEAK FORWA RD SURGE CURRENT (A) 0.3 160 120 1000 80 40 8.3ms Single Half Sine-Wave JEDEC Method 0 1 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Peak Forward Surge Current 100 100 0.1 1.0 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 100