Certificate TH97/10561QM SBL1030 ~ SBL1040 Certificate TW00/17276EM SCHOTTKY BARRIER RECTIFIER DIODES TO-220AC PRV : 30 ~ 40 Volts Io : 10 Amperes 0.154(3.91)DIA. 0.415(10.54)MAX. 0.148(3.74) FEATURES : 0.113(2.87) 0.103(2.62) * Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 * Dual rectifier construction, positive center tap * Metal silicon junction, majority carrier conduction * Low power loss, high efficiency * Guardring for overvoltage protection * For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications * High temperature soldering : 250°C/10 seconds, 0.25" (6.35mm) from case * Pb / RoHS Free 0.145(3.68) 0.135(3.43) 0.635(16.13) 0.625(15.87) 0.350(8.89) 0.330(8.39) 1 0.185(4.70) 0.175(4.44) 0.603(15.32) 0.573(14.55) 2 0.160(4.06) 0.140(3.56) PIN 1 0.560(14.22) 0.530(13.46) CASE PIN 2 0.205(520) 0.195(4.95) MECHANICAL DATA : 0.037(0.94) 0.027(0.68) 0.022(0.56) 0.014(0.36) Dimensions in inches and ( millimeters ) * Case : JEDEC TO-220AC molded plastic body * Terminals: Plated leads, solderable per MIL-STD-750 Method 2026 * Polarity: As marked * Mounting Position: Any * Weight : 2.24 grams (Approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS 0.055(1.39) 0.045(1.14) ( Tc = 25 °C unless otherwise noted) SYMBOL SBL1030 SBL1040 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 30 40 V Maximum Working Peak Reverse Voltage VRWM 30 40 V Maximum DC Blocking Voltage VDC 30 40 V Maximum Average Forward Rectified Current at Tc = 110 °C IF(AV) 10 A IFSM 250 A VF 0.6 V Peak Forward Surg Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 10 A (Note 1) Maximum Average Reverse Current at T C = 25 °C Rate Peak Reverse Voltage (Note 1) T C = 100 °C Typical Thermal Resistance (Junction to Case) Per Leg Operating Junction and Storage Temperature Range IR 1.0 50 mA RθJC 2.0 °C/W TJ, TSTG -40 to + 125 °C Note : (1) Pulse test : 300 µs pluse width, 1% duty cycle Page 1 of 2 Rev. 01 : March 6, 2006 Certificate TH97/10561QM Certificate TW00/17276EM RATING AND CHARACTERISTIC CURVES ( SBL1030 ~ SBL1040 ) FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 250 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 10 8 6 4 2 Resistive or Inductive Load 0 200 150 100 TJ =TJmax 8.3 ms single half sine-wave (JEDEC Method) 50 0 0 25 50 75 100 125 150 1 CASE TEMPERATURE, (°C) 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 10 TJ = 125 °C INSTANTANEOUS REVERSE CURRENT, (mA) TJ = 125 °C INSTANTANEOUS FORWARD CURRENT, (A) 10 1.0 TJ = 25 °C 0.1 TJ = 75 °C 1.0 0.1 TJ = 25 °C 0.01 Pulse Width = 300 μs 1% Duty Cycle 0.01 0 0.2 0.4 0.6 0.8 1.0 INSTANTANEOUS FORWARD VOLTAGE, (V) Page 1 of 2 1.2 0.001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) Rev. 01 : March 6, 2006