P6KE6.8(C)A THRU P6KE440(C)A TRANSIENT VOLTAGE SUPPRESSOR Breakdown Voltage - 6.8 to 440 Volts Peak Pulse Power - 600 Watt FEATURES ● ● ● ● DO-15 Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time : Typically less than 1.0 ps from 0 volts to BV min High Temperat Soldering Guaranteed : 265°C/10 sec/.375." 1.0 (25.4) MIN. (9.5mm) Lead Length, 51bs., (2.3kg) Tension 0.140(3.6) 0.104(2.6) DIA. MECHANICAL DATA ● ● ● ● ● 0.300(7.6) 0.230(5.8) Case: JEDEC DO-15 molded Plastic Terminals: Axial Leads, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band Except Bi-Directional Marking: Any Weight: 0.4grams(approx), 0.015ounce 1.0 (25.4) MIN. 0.034(0.9) 0.028(0.7) DIA. Dimensions in inches and (millimeters) “C” Suffix Designates Bi-directional Devices “A” Suffix Designates 5% Tolerance Devices No Suffix Designates 10% Tolerance Devices Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Characteristic Symbol Value Unit Peak Pulse Power Dissipation 10/1000µS Waveform (Note 1, 2) Figure3,Tp=1ms P PPM 600 Minimum W Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 4 IPPM See Table 1 A Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 2, 3) IFSM 100 A Tj, TSTG -55 to +175 °C Operating and Storage Temperature Range Note: 1. Non-repetitive current pulse per Figure 4 and derated above TA = 25°C per Figure 1. 2. Mounted on 5.0mm2 (0.013mm thick) land area. 3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum. P6KE6.8(C)A THRU P6KE440(C)A TRANSIENT VOLTAGE SUPPRESSOR Breakdown Voltage - 6.8 to 440 Volts Peak Pulse Power - 600 Watt Electrical Characteristics P6KE PART NUMBER UNI-POLAR P6KE6.8A P6KE7.5A P6KE8.2A P6KE9.1A P6KE10A P6KE11A P6KE12A P6KE13A P6KE15A P6KE16A P6KE18A P6KE20A P6KE22A P6KE24A P6KE27A P6KE30A P6KE33A P6KE36A P6KE39A P6KE43A P6KE47A P6KE51A P6KE56A P6KE62A P6KE68A P6KE75A P6KE82A P6KE91A P6KE100A P6KE110A P6KE120A P6KE130A P6KE150A P6KE160A P6KE170A P6KE180A P6KE200A P6KE220A P6KE250A P6KE300A P6KE350A P6KE400A P6KE440A BI-POLAR P6KE6.8CA P6KE7.5CA P6KE8.2CA P6KE9.1CA P6KE10CA P6KE11CA P6KE12CA P6KE13CA P6KE15CA P6KE16CA P6KE18CA P6KE20CA P6KE22CA P6KE24CA P6KE27CA P6KE30CA P6KE33CA P6KE36CA P6KE39CA P6KE43CA P6KE47CA P6KE51CA P6KE56CA P6KE62CA P6KE68CA P6KE75CA P6KE82CA P6KE91CA P6KE100CA P6KE110CA P6KE120CA P6KE130CA P6KE150CA P6KE160CA P6KE170CA P6KE180CA P6KE200CA P6KE220CA P6KE250CA P6KE300CA P6KE350CA P6KE400CA P6KE440CA REVERSE BREAKDOWNBREAKDOWN PEAK MAXIMUM TEST STAND- OFF VOLTAGE VOLTAGE PULSE CLAMPING CURRENT VBR(V) VBR(V) VOLTAGE VOLTAGE CURRENT IT (mA) VRWM(V) Ipp(A) @Ipp Vc(V) MIN.@I T MAX.@IT 5.80 6.40 7.02 7.78 8.55 9.40 10.20 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.00 102.00 111.00 128.00 136.00 145.00 154.00 171.00 185.00 214.00 256.00 300.00 342.00 376.00 6.45 7.13 7.79 8.65 9.50 10.50 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 53.20 58.90 64.60 71.30 77.90 86.50 95.00 105.00 114.00 124.00 143.00 152.00 162.00 171.00 190.00 209.00 237.00 285.00 332.00 380.00 418.00 7.14 7.88 8.61 9.55 10.50 11.60 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 58.80 65.10 71.40 78.80 86.10 95.50 105.00 116.00 126.00 137.00 158.00 168.00 179.00 189.00 210.00 231.00 263.00 315.00 368.00 420.00 462.00 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 58.1 54.0 50.4 45.5 42.1 39.1 36.5 33.5 28.8 27.1 24.2 22.0 19.9 18.4 16.3 14.7 13.3 12.2 11.3 10.3 9.4 8.7 7.9 7.2 6.6 5.9 5.4 4.9 4.5 4.0 3.7 3.4 2.9 2.8 2.6 2.5 2.2 1.9 1.8 1.5 1.3 1.1 1.0 REVERSE LEAKAGE @V RWM IR(µA) 1000 500 200 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 P6KE6.8(C)A THRU P6KE440(C)A RATINGS AND CHARACTERISTIC CURVES PEAK PULSE POWER (Ppp) or CURRENT (IPPM) DERATING IN PERCENTAGE, % PPPM, PEAK PULSE POWER, (KW) FIG.1- PEAK PULSE POWER RATING CURVE 100 100 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 TA=25 C 10 1.0 0.1 0.0001 0.001 0.01 0.1 1.0 FIG.2- PULSE DERATING CURVE 10 t d , PULSE WIDTH, (ms ). 75 50 25 0 PEAK VALUE lPPM 100 PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of lPPM td 0 0 1.0 2.0 75 100 125 150 175 200 o FIG.4- TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL HALF VALUE- lPPM 2 10/1000 sec. WAVEFORM as DEFINED by R.E.A. 50 50 3.0 6,000 CJ, JUNCTION CAPACITANCE.(pF) PEAK PULSE CURRENT - % tr=10 u sec. 25 TA, AMBIENT TEMPERATURE, ( C) FIG.3- PULSE WAVEFORM 150 0 MEASURED at ZERO BIAS o oo 1,000 Tj=25 C f=1.0MHz Vsig=50mVp-p MEASURED at STAND-OFF VOLTAGE, VWM 4.0 100 t, TIME, ms 10 1.0 100 200 FIG.5- STEADY STATE POWER DERATING CURVE 200 5.0 L=0.375"(9.5mm) LEAD LENGTHS 60Hz RESISTIVE OR INDUCTIVE LOAD 2.5 1.6 X 1.6 X .040" (40 X 40 X 1mm.) COPPER HEAT SINKS 1.25 0 25 50 75 100 125 Tj=Tj max 8.3ms Single Half Sine Wave (JEDEC Method) 150 175 200 10 1 TL, LEAD TEMPERATURE, ( C) FIG.7- TYPICAL REVERSE LEAKAGE CHARACTERASTICS 1,000 100 10 MEASURED AT DEVICES STAND-OFF VOLTAGE, VWM o TA =25 C 1 0.1 0.01 0.001 o 100 200 FIG.8 - TYP. TRANSIENT THERMAL IMPEDANCE 100 10 o TA=25 C 0 100 10 NUMBER OF CYCLES AT 60Hz o TRANSIENT THERMAL IMPEDANCE ( C/W) lD, INSTANTANEOUS REVERSE LEAKAGE CURRENT, (MICROAMPERES) FIG.6- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY 100 3.75 0 lFSM, PEAK FORWARD SURGE CURRENT, (AMPERES) PM(AV), STEADY STATE POWER DISSIPATION, (W ATTS) V(BR), BREAKDOWN VOLTAGE. (VOLTS) 300 V(BR), BREAKDOWN VOLTAGE. (VOLTS) 400 500 1 0.1 0 0.2 0.4 0.6 0.8 tp-PULSE DURATION(SEC) 1 1.2