2.54mm Pitch Board to Cable Connector FRC2 Series FEATURE ● FRC2 series is header connectors which mounted on PCB and socket connectors which terminated flat cable. ● Number of contact :10, 14, 16, 20, 26, 30, 34, 40, 50, 60 contacts are available. ● UL Approved (File No. E72124) ● Polarizing key prevents from mis-mating. Conforming Standard MIL-DTL-83503 ● Conform to MIL-DTL-83503 ● Inter-mateable with HU5 series. SPECIFICATIONS Rated Voltage 250V AC (r.m.s.) Rated Current 1A / Contact Insulation Resistance 1000 MΩ min. at 500V DC Contact Resistance 15 m Ω max. Dielectric Withstanding Voltage 500V AC (r.m.s) / 1 minute Operating Temperature -55℃〜 +85℃ AWG28 (Stranded Cable / Solid Cable) Applicable Cable AWG30 (Solid Cable) MATERIAL/FINISH Socket Item RoHS Compliant Compliant Material / Finish Housing Polycarbonate Resin(UL94V-0) / Black Cover Polycarbonate Resin(UL94V-0) / Black Contact Copper Alloy / Au over Ni Plating Strain Relief Polyamide Resin (UL94V-0) / Black Header Item 120920 Material / Finish Housing PBT Resin / (UL94V-0) / Black Contact Copper Alloy / Au over Ni Plating ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp FRC2 Series Unit:mm ○ Socket Connector FRC2-A020-30S Strain Relief S:with Strain Relief (for Header with Long Locking Lever) No Digit:without Strain Relief (for Header with Short Locking Lever) Cover Style 0:Open-end A:Closed-end Number of Contact 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 Polarizing Key 0:10・・・・No Key 14, 16, 20, 26, 30, 34, 40・・・・ 1 Key 50, 60・・・・ 2 Keys A:50, 60・・・・ 1 Key C:60 ・・・・・・2 Keys Contact Plating 1:Au (0.8 μ m) over Ni Plating 2:Au (0.4 μ m) over Ni Plating 3:Au (Flash) over Ni Plating FRC2-AA □□ - □□ FRC2-A0 □□ - □□ (with Closed-end Cover) (with Open-end Cover) FRC2-A26 FRC2-AA26 Strain Relief Strain Relief 10.65 2.54 3.8 6 2.54 3.8 2.54 A B Polarizing Key A B 6 2.54 △Marking Polarizing Key △Marking 16.25 Cover Cover Number of A B 10 17.27 10.16 16 24.89 26 37.59 30.48 47.75 40.64 68.07 60.96 Contact 14 22.35 20 15.24 17.78 29.97 30 42.67 40 55.37 34 50 60 A 22.86 35.56 48.26 80.77 73.66 ○ Strain Relief FRC2-20-04 Number of Contact Number of Contact 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 10 17.27 16 24.89 14 20 26 A 5.1 6 7.8 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 22.35 29.97 37.59 30 42.67 40 55.37 34 50 3.6 A 60 47.75 68.07 80.77 FRC2 Series Unit:mm ○ Header Connector FRC2-C20S13-0L Lockig Lever L:Long Locking Lever (for Socket with Strain Relief) S:Short Locking Lever (for Socket without Strain Relief) N: No Locking Lever 3.62 H 17.4 26.4 3.04 Contact Plating 1:Au (0.8 μ m) over Ni Plating 2:Au (0.4 μ m) over Ni Plating 3:Au (Flash) over Ni Plating 10.56 Contact Length 1:3.6mm Polaerizing Key E 0:10・・・・ No Key D 14,16,20,26,30,34,40・ ・・・1 Key C 50,60・ ・・・△Marking 2 Keys(H=22.86mm) 2.54 Rear Side A:50,60・・・・ 1 Key C:60・・・・・・ 2 Keys(H=27.94mm) 6.2 Contact Style S: Straight L: Right Angle 0.4 Number of Contact 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 2-φ2.62 B A Right Angle DIP Straight DIP Header with Long Locking Lever E D 15 2.54 0.6 0.64 2-φ2.62 B 2.54 0.1 3.04 2.54 0.6 0.64 φ0.75 max. 2.54 0.1 0.64 8.2 8.5 2.54 ※1 B 0.15 0.6 0.64 2.54 0.6 0.64 C 0.12 2 F +0.08 0 2.54 15 0.6 0.64 0.6 Right Angle Contact Section Dimensions Header with Short Locking Lever ※1 0.6 0.64 15 3.6 2-φ2.6 M3 Thread 3.6 2.54 4.35 A 0.9 0.74 0.1 17.4 0.4 0.6 0.64 3.6 3.62 6.2 0.6 0.64 3.6 15 △Marking Rear Side 10.56 26.4 2.54 2.54 C When using M2.6 screw, the hole diameter should be ∅2.8. When using nominal diameter 3 tapping screw, the hole diameter should be ∅3.2. 2.54 (Nominal Diameter 3 Tapping Screw) 0.25 0.1 24.3 3. 2 0.1 +0.08 0 0.9 2.54 0.1 E Header with Locking Lever 2.54 0.1 C 0.12 F 0.15 17.4 Straight Recommended Mounting Dimensions Number of A B 10 32.00 21.84 16 39.62 29.46 Contact 14 37.08 D 10.16 17.52 42.4 45.6 17.78 25.14 50.0 53.2 42.16 30.48 37.84 52.32 40.64 48.00 72.64 60.96 26.92 15.24 22.86 20 44.70 34.54 30 57.40 47.24 70.10 59.94 95.50 85.34 26 52.32 34 62.48 50 82.80 40 60 E C 35.56 48.26 73.66 22.60 30.22 42.92 Short Lock 47.5 55.1 62.7 67.8 65.9 71.0 93.2 96.4 81.02 105.9 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 3 58.3 76.1 80.5 http://www.ddknet.co.jp 50.7 72.9 55.62 68.32 Long Lock F 27.94 33.02 35.56 40.64 48.26 53.34 58.42 83.7 66.04 109.1 99.44 78.74 FRC2 Series Unit:mm ○ Polarizing Key for Socket Part Number:HU-005 HU-005 consists HU-005-1 AND HU-005-2. Material / Finish : Polyamide (UL94V-0) / Natural Color HU-005-1 ○ Key Guide for Header HU-005-1 Part Number :HU-006 HU-005-2 HU-005-2 HU-005-2 HU-005-1 Material / Finish : Polycarbonate (UL94V-0) / Black ※ When connectors having same number of contacts are used side by side, key guide can prevent from mis-mating. 10,14,16 contacts are not applicable. HU-006 HU-006 ○ Cable Assembly Configurations Cable No. and Contact Position ○ Assembly Tools ● Cable Cutting Tool :357J-4256 ● Termination Tool :357J-4674D (Press) :357J-4664N (Attachment) ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 HU-006