0.4 mm Pitch Back-Lock FPC Connector FF19CE Series 【CE-ATA 8Bit Standard】 OUTLINE ・FF19CE series is a FPC connector which is 0.4mm pitch,1.25mm height and 4.21mm depth. ・It is interface connector for smaller than 1.8" HDD. FEATURE ・ Conforming to CE-ATA 8bit standard (HDD side) ・Front-acccess back lock design is short depth and suitable to compact device. ・Cable lock mechanism retains FPC. ・Mid-mounting design which is mounted across the PCB enables to operate the lock lever from reverse side. ・Connectors deliver with the lock lever opened. Time saving for FPC inserting operation. ・ Both upper and lower contacts design accepts any FPC inserting directions. ・ Back lock mechanism enables to retain FPC against pulling upward direction. ・The lock lever does not fall down to the opposite side. ・ Board lock pins prevent the mounting gap. ・Nickel barrier prevents solder wicking. SPECIFICATIONS APPLICATIONS Rated Voltage 50V AC(r.m.s.) Rated Current 0.5A / Contact Dielectric Withstanding Voltage 200V AC(r.m.s.) / 1 minute Insulation Resistance 100 M Ω min. at 500V DC Contact Resistance 50m Ω max. MATERIAL/FINISH Item 090803 RoHS Compliant Compliant Material / Finish Contact Copper Alloy /Au(Flash) over Ni Plating Housing LCP Resin (UL94V-0) / Ivory Lock Lever PPS Resin (UL94V-0) / Black ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp Portable HDD FF19CE Series Unit：mm ○ CE-ATA 8Bit Standard Part Number FF19CE-1 8B-R11BP ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ① Series 15.90 0.10 FF19CE ② Number of Contact 18 : 18 Contacts ③ Contact Posision B：Upper and Lower Contact ④ Contact Style R：Right Angle ⑤ Mounting Type 1： Mid Mount Type ⑥ Contact Plating 1：Au(Flash) over Ni Plating ⑦ Lock Lever Type B：with Cable Lock ⑧ Board Lock P： with Board Lock 14.90 0.05 6.80 0.10 0.40 0.07 0.15 0.03 0.15 0.03 3.40 0.10 X 4.21 0.15 0.55 0.05 3.40 4.20 4.20 14.90 0.10 X 12.20 0.10 6.80 A 0.23 0.03 0.04 A 0.40 1.00 0.10 2.00 0.05 0.80 0.10 5 0.0 3.10 0.10 No.18 Contact 10.97 0.15 （3.00） No.1 Contact 2φ 0.7 2- R0 .5 0.0 5 3.10 0.10 10.10 0.03 1.00 0.10 0.35 0.05 0.40 0.10 0.70 0.05 0.40 0.10 X 4.10 0.10 1.25 0.10 10.83 0.05 （2.71） 11.64 0.15 2.00 0.05 0.90 0.05 0.55 0.05 15.70 0.15 0.70 0.05 1.60 0.10 3.95 0.10 A 3.95 14.70 Recommended PCB Dimensions R 0.40 5 .20 0.0 Y 0.20 R0 Pin1 0.27 0.03 0.70 0.05 0.10 Y 3.40 0.70 0.05 0.10 X 4.20 0.50以上 4- R 0. 05 2- Supporting Tape 0. 0. 20 20 05 0. 1.40 0.30 4- 0.80 0.70 0.05 1.20 0.10 0.55 0.10 0.20 0.03 0.06 X 3.40 4.20 10.05 0.05 X Recommended FPC Dimensions ・Recommended FPC Plating ：Au over Ni Plating ・Recommended Adhesive ：Heat Curing Adhesive ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 FF19CE Series Unit：mm ○ Package Specifications 25.5 User direction of feed φ80 φ380 32.4 TYP. 3.0 0.2 ■ Reel Dimensions 400mm min. 2000 Pockets Tailer：90 Pockets min. Leader：10 Pockets Empty component pockets sealed with cover tape. Empty component pockets sealed with cover tape. User direction to feed 28.40 1.35 16.20 B B C Section D-D Section E-E D E C 12.00 24.00 2.10 TYP. 14.00 12.00 4.00 1.75 2.00 0.10 E D 2.70 Section C-C ■ Quantity：2000pcs./reel, 10 reels/Carton ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 3.60 TYP. 1.45 TYP. 1.19 TYP. Section B-B 32.00 14.20 0.10 ■ Emboss Tape Dimensions