Compact Coaxial Connector PSH Series OUTLINE DDK’s PSH compact miniature coaxial connector provides the optimal balance of performance and size. This surface mounted (SMT) RF connector with VSWR performance of 1.3 at DC to 3GHz and VSWR of 1.5 at 3 GHz to 6 GHz and a stacking height of 2.0mm or 2.5mm. This low cost connector is suitable for wireless LAN applications based upon IEEE 802-11a. Frequency Range FEATURE DC to 6GHz ・Applicable frequency ranges DC to 3GHz or 3GHz to 6GHz Characteristic Impedance ・Compact and low profile mated height of 2.0mm or 2.5mm 50 Ω ・Applicable 50 ohm coaxial cable sizes are φ 0.81mm φ 1.13mm φ 1.32mm and φ 1.37mm ・30 mate/demate cycles ・Custom cable lengths available ・Applicable for IEEE 802.11a applications ・Tape and reel package ・RoHs Compliant APPLICATIONS ・Wireless LAN, Portable PC, Mobile Phone, Measurement Equipments, Bluetooth. SPECIFICATIONS 嵌合高さ V.S.W.R. Operating Temperature プラグ PSH-LP-OD0.81-CR3 Receptacle PSH-LP-OD1.13-CR3 Plug PS 1.5 the specifications on each item with its drawing from us when you use. 1.2 1.5 1.4 1.1 1.4 1.3 1.0 1.3 VSWR VSWR 1.5 VSWR 1.4 1.3 1.2 1.0 0 1 2 3 4 5 6 0 1 2 3 1.5 PSH-LP-OD1.32-CR3（L=250mm, both ended harness） DC to 6 GHz VSWR 1.5 1.4 1.3 1.3 6 1.0 0 1 2 3 4 5 6 PSH-LP-OD1.37-CR（L=250mm, both ended harness） DC to 6 GHz VSWR 1.2 1.2 1.1 0 1 2 3 4 Frequency〔GHz〕 5 6 1.0 0 1 2 3 4 Frequency〔GHz〕 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 1.5 1.4 1.3 SWR 5 VSWR 1.4 1.1 141028 4 Frequency〔GHz〕 Frequency〔GHz〕 Frequency〔GHz〕 VSWR PSH-LP-OD1.13-CR3（L=250mm, both ended harness） DC to 6 GHz VSWR 1.1 1.1 1.0 1.2 PSH-LP-OD1.37-CR（L=250mm, both ended harness） DC to 6 GHz VSWR レセプタク PS PSH-LP-OD1.32-CR3（L=250mm, both ended PSH-LP-OD1.32-CR3 harness） ＊ The specifications are typical but may not apply to all connectors. Please check DC toReceptacle 6 GHz VSWR PSH-LP-OD1.37-CR3 PSH-LP-OD0.81-CR3（L=250mm, both ended harness） DC to 6 GHz VSWR 2.5 Plug 2 Contact Resistance Mating Height 50 Ω 60VAC(r.m.s.) 200V AC(r.m.s.) / 1 minute 500M Ω Mim. at 100V DC Contact : 20m Ω max. Outer conductor : 10m Ω max. 1.3 max. at DC to 3GHz 1.5 max. at 3 to 6GHz -40 〜 +85℃ 2.5 Characteristic Impedance Rated Volatge Dielectric Withstanding Voltage Insulation Resistance 5 6 2 ↓2N ○ Unit：mm Receptacle Receptacle ⇒ Unmating Tool PSH Series ②Pull off vertically ⇒ ①Insert Outer Conductor Finish Au Part Number GND PSH-SR-PS-1000 GND PSH-SR-PS-5000 Quantity Reel Package Au 1000pcs./reel 5000pcs./reel 1.05±0.05 ※ Tape and reel package 1.25 Ø2 0.5 SIG 1.9±0.05 GND 4±0.05 Pattern Prohibited Area PCB Monting Dimensions 1.8 2.6 3.1 2.6 1±0.05 3 1±0.05 2.2±0.05 SIG RoHS MATERIAL/ FINISH Compliant Compliant Material / Finish Item 2.8 (5.5) Receptacle Outer Conductor Copper Alloy / Au Plating Contact Copper Alloy / Au Plating Insulator Thermoplastic Resin / Ivory PSH-LP-OD0.81-CR3 1.7 ○ PlugPSH-LP-OD1.13-CR3 Cable Assmbly Applicable Cable (5.8) (4.2) Part Number Dia. φ 1.13 PSH-LP-OD1.13-CR3 Au PSH-LP-OD0.81-CR3 Au Ｌ Applicable Cable Size O.D. φ 0.81 Material / Finish Item (4.5) O.D. φ 1.13 RoHS Compliant Compliant Center Conductor Insulator Plug Outer Conductor Copper Alloy / Au Plating Contact Copper Alloy / Au Plating Insulator Thermoplastic Resin / Black Outer Cable Dia. Conductor 7/0.08（AWG32） φ 0.7 Single Braid φ 1.13 Ag Plating FEP Sn Plating FEP 7/0.05（AWG36） φ 0.4 Single Braid φ 0.81 Characteristic Impedance FEP Sn Plating Moreover, the characteristic and the specification of the published product are the reference values. 8 (11.6) Please confirm the content with the latest delivery specifications when you use the product. 六角対辺幅 http://www.ddknet.co.jp (6.3) 2 MAX：260℃ 260 230 Attenuation 200max.(dB/m) 3GHz 50 Ω 4.0 50 Ω 6.2 FEP PSH-LP-OD1.32-CR3 PSH-LP-OD1.37-CR3 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Ag Plating Temperature[℃] 2.8 ※ Plug connector is available in only cable assembly. MATERIAL/ FINISH Cable Size Outer Conductor Finish Dia. φ 0.81 1.7 新 Plug 150 100 50 6GHz 5.7 9.4 Pre-heating 150～200℃ 60～120sec 230℃ min. 30～35sec Time[sec] PSH-LP-OD1.32-CR3 PSH Series PSH-LP-OD1.37-CR3 ○ Plug Cable Assmbly Unit：mm Applicable Cable (6.3) Au Dia. φ 1.37 PSH-LP-OD1.37-CR3 Au ※ Plug connector is available in only cable assembly. Connector Angle １ Connector Angle 2 RoHS MATERIAL/ FINISH 2.1 Outer Conductor Finish PSH-LP-OD1.32-CR3 表1.コネクタ角度表 3 Part Number Dia. φ 1.32 Connector Angle 3 Compliant Compliant Connector Angle 4 Material / Finish Item (5) Plug Outer Conductor Copper Alloy / Au Plating Contact Copper Alloy / Au Plating Insulator Thermoplastic Resin / Black Applicable Cable Size Cable Size O.D. φ 1.32 Center Conductor Insulator 7/0.08（AWG32） φ 0.7 Ag Plating FEP 7/0.105（AWG30） φ 0.9 Outer Cable Dia. Conductor Double Braid Impedance φ 1.32 表2.ケーブル長公差表 Sn Plating FEP ケーブル長Ｌ Single Braid 25≦L≦200 Ag Plating FEP Sn Plating 200＜L≦500 500＜L≦1000 1000＜L ○ Adaptor（SMA plug to PSH jack） O.D. φ 1.37 Attenuation max.(dB/m) Characteristic 標準公差 ±3 FEP ±5 ±10 ±1.5％ φ 1.37 3GHz 6GHz 50 Ω 3.7 5.4 50 Ω 3.0 4.7 DMP-SA-PSHJ 8 Hex Dia. (10.5) MATERIAL/ FINISH Material / Finish Item Outer Conductor Adaptor SUS(304) Contact Copper Alloy / Au Plating Insulator PTFE ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp RoHS Compliant Compliant 3 PSH Series Unit：mm ○ Harness Ｌ Basic No. 80-076-XXXX-XXXX-X-X 表1.コネクタ角度表 Cable / Plating （Refer to Table.1） Connector Angle １ Length：mm（4 fig.） 200mm : 0200 Connectors Angle （Refer to Table 2） Cable Color（FEP） 1：Black, 3：Gray, Table 3. Cable Length Table 1. Cable / Plating No. 0001 Cable O.D. Cable Length：L Outer conductor Plating Connector Angle 3 φ 1.13 Au Plating Connector Angle 2 Ｌ Tolerance 25 ≦ L ≦ 200 Connector Angle 4 ±3 200 ＜ L ≦ 500 ±5 0003 φ 0.81 Au Plating 0005 φ 1.32 Au Plating 500 ＜ L ≦ 1000 ±10 0007 φ 1.37 Au Plating 1000 ＜ L ±1.5％ 表1.コネクタ角度表 Table 2. Connector Angle Connector Angle １ Connector Angle 2 新 Connector Angle 3 Connector Angle 4 表2.ケーブル長公差表 ケーブル長Ｌ 標準公差 ±3 25≦L≦200 ±5 200＜L≦500 ±10 500＜L≦1000 1000＜L ±1.5％ ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 4 新 PSH Series →4N (Max.) ○ Instruction Manual Unit：mm Pull-off Tool ⇒ When mating the connector, please insert the connector along the center conductor. When unmating the connector, please pull off vertically by using below tool ②Pull off vertically （No.357J-K8024-01）. ↓2N (Max.) Excessive torsional mating causes to①Insert be broken. Pull-off Tool ⇒ ⇒ ② Pull off vertically ⇒ ① Insert ↑2N（Max.) 新 →4N（Max.) ↑2N (Max.) ・Allowable cable load at mating Do not add the load more than right figure. ↓2N（Max.) →4N (Max.) ↓2N (Max.) ○ Reflow Temperature Profile ⇒ Pull-off Tool Temperature[℃] ② Pull off vertically 260 ⇒ 230 MAX：260℃ ① Insert 200 150 100 50 Pre-heating 150～200℃ 60～120sec 230℃ max. 30～35sec Time[sec] ※ Above reflow temperature plofile can be fluctuated by sort of the solder paste. Please test the soldering temperature beforehand. ※ The temperature is measured at the terminal area. ※ Reflow cycle is up to twice. ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp 5