Low Profile Coaxial Connector LPC Series FEATURE ・ Push-on, semi-lock coaxial connector for low profile and high density telecom equipments. Frequency Range ・Ultra low profile mating height from PCB is less than 10mm. DC 〜 1.5GHz ・Outer conductor and contacts are press-fabricated Characteristic Impedance to meet low cost requirement. 50 Ω Push-on SPECIFICATIONS Characteristic Impedance 50 Ω Rated Voltage 100VAC(r.m.s.) Dielectric Withstanding Voltage 250V AC(r.m.s) / 1 minute Insulation Resistance 1,000M Ω min. at 250V DC Contact Resistance 10m Ω max. V.S.W.R. 1.2 max. (DC 〜 1.5GHz) φ4.2 -55 〜 +85℃ Operating Temperature ＊ The specifications are typical but may not apply to all connectors. Please check the specifications on each item with its drawing from us when you use. MATERIAL/FINISH Item 7.7 Lock Type L RoHS Compliant Compliant Material / Finish Outer Conductor Copper Alloy / Ag Plating Contact (Male) Copper Alloy / Au Plating Contact (Female) Copper Alloy / Au Plating MATING DIMENSION Receptacle Interface Plug Interface （4.2） ◎ Please favor us your cable assembly order to assure the performance. ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without a previous notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. 121226 http://www.ddknet.co.jp Unit：mm ○ Plug Connector 7.7 Part Number Applicable Cable L Crimp Tool LPC-LP-0.8DQEW 0.8D-QEW 8.33 CR-H-1162 LPC-LP-1.5DQEW 1.5D-QEW 8.20 CR-H-1161 φ4.2 L ○ Receptacle Connector LPC-SR-PC 9.65 6.35 LPC-LR-PC-CF 6.35 9.65 10 3.3 6.4 3.3 （4.2） 8.7 5.7 Receptacle Interface 3 5.1 10 0.05 6.4 4-φ1.2 0.05 0.05 2.5 2.5 4-φ1.2 0.05 2.5 erface LPC Series 0.05 5 0.05 Recommended PCB Mounting Dimensions 2.5 0.05 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without a previous notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. 5 0.05 Recommended PCB Mounting Dimensions http://www.ddknet.co.jp 2