Compact Bayonet Lock Coaxial Connector BMB Series Characteristic Impedance 50 Ω Frequency Range DC to 6GHz Lock Type Bayonet FEATURE ・ Downsize a BNC connector and it is the size equal to SMA connectors. ・Apploximately 50% of space-saving in comparison with BNC connector. ・Locking type is Bayonet locking like BNC connector. ・ Because of Bayonet locking, torque management is not necessary and easier mating/unmating than SMA connector. APPLICATIONS ・Wiress Base Station, Telecom Equipment, Measuring Equipment SPECIFICATIONS Characteristic Impedance Rated Voltage Dielectric Withstanding Voltage Insulation Resistance Contact Resistance V.S.W.R. Operating Temperature 50 Ω 500VAC(r.m.s.) 1000V AC(r.m.s.) / 1 minute 1000M Ω Mim. at 500V DC Contact : 3m Ω max. 1.2 max. at DC to 3GHz 1.3 max. at DC to 6GHz −40 to +85℃ ＊ The specifications are typical but may not apply to all connectors. Please check the specifications on each item with its drawing from us when you use. Item Center Conductor Outer Conductor Insulator 130520 Compliant Compliant Material / Finish Copper Alloy / Au Plating Copper Alloy / Ni Plating PTFE V.S.W.R.（PatchcodeL=300mm） 1.5 1.4 V.S.W.R Material/Finish RoHS 1.3 1.2 1.1 1.0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency【GHz】 ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. http://www.ddknet.co.jp Unit：mm BMB Series ○ Straight Cable Plug BMB-SP-1.5D-CR1 Applicable Cable 1.5D-2V、1.5D-2W φ 4.8 φ 9.5 1.5D-HQ・SUPER (20.5) ○ Receptacle Jack BMB-SR-PC （0.7 ） （0.7） 7.9 9 φ7. φ1.0 A3 BMB-SP-1.5D-CR1 109839 +0.1 5-φ1.2 0 7.0 3.5 5.08 0.1 9.0 12.5 基板取付参考 2.54 0.05 （0.7） 2 φ1.0 7.9 5.08 0.1 9 φ7. +0.1 5-φ1.2 0 7.0 3.5 2.54 0.05 5.08 0.1 9.0 ＢＭＢ−ＳＲ−ＰＣ PCB Mounting Dimensions ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. 12.5 Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. 基板取付参考寸法 http://www.ddknet.co.jp 2 １０８２９１