2.54mm Pitch Board to Cable Connector FRC5 Series FEATURE Conforming Standard ● UL Approved (File No. E72124) MIL-DTL-83503 ● Conform to MIL-DTL-83503 ● Polarizing key prevents from mis-mating. SPECIFICATIONS Rated Voltage 250V AC (r.m.s.) Rated Current 1A / Contact Insulation Resistance 1000 ＭΩ min. at 500V DC Contact Resistance 15 m Ω max. Dielectric Withstanding Voltage 500V AC (r.m.s) / 1 minute Operating Temperature -55℃〜 +85℃ AWG28 (Stranded Cable / Solid Cable） Applicable Cable AWG30 (Solid Cable) MATERIAL/FINISH Socket Item RoHS Compliant Compliant Material / Finish Housing PBT Resin(UL94V-0) / Black Cover PBT Resin(UL94V-0) / Black Contact Copper Alloy / Au over Ni Plating Strain Relief PBT Resin (UL94V-0) / Black Header Item 141020 Material / Finish Housing PBT Resin (UL94V-0) / Black Contact Copper Alloy / Au over Ni Plating Lock Lever PBT Resin（UL94V-0) / Black Spring Pin Stainless Steel ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp FRC5 Series Unit：mm ○ Socket Connector FRC5-A026-3T0S-FA Cover Style 0：Open-end A：Closed-end FA：Lead Free Note)Closed-end cover for 64 contacts are not available Strain Relief N：without Strain Relief S：with Strain Relief Number of Contact 10, 14, 16, 20, 26, 30, 34, 40, 50, 60,64 Polarizing Key Contact Plating 1：Au (0.8 μ m) over Ni Plating 2：Au (0.4 μ m) over Ni Plating 3：Au (Flash) over Ni Plating 0：10・・・・・・・・・・・・・・・No Key 14, 16, 20, 26, 30, 34, 40・・・・ 1 Key 50, 60, 64・・・・ ・・・・・・2 Keys (H=22.86mm) A：50, 60, 64・・・・・・・・・・1 Key C：60, 64 ・・・・・・・・・・・・2 Keys (H=27.94mm) D : 10 ・・・・・・・・・・・・・ 1 Key Plating (Termination Area) T：Sn-Ag Plating Part Number -3T ▽ Marking 16.25 10.65 5 Contact Plating Sign 14.4 Strain Relief Cover 6.0 2.54 3.8 1.0 Ａ Ｂ 2.54 Polarizing Key Number of Contact A FRC5-AX10-XXXX-FA 10 17.27 10.16 FRC5-AX14-XXXX-FA 14 22.35 15.24 FRC5-AX16-XXXX-FA 16 24.89 17.78 FRC5-AX20-XXXX-FA 20 29.97 22.86 FRC5-AX26-XXXX-FA 26 37.59 30.48 FRC5-AX30-XXXX-FA 30 42.67 35.56 FRC5-AX34-XXXX-FA 34 47.75 40.64 FRC5-AX40-XXXX-FA 40 55.37 48.26 FRC5-AX50-XXXX-FA 50 68.07 60.96 FRC5-AX60-XXXX-FA 60 80.77 73.66 FRC5-AX64-XXXX-FA 64 85.85 78.74 FRC5-Ax26～Ax40－xxxx-FA FRC5-Ax50～Ax64－xxAx-FA DDK 5 -1T DDK 5-1T 5-1T 5-1T DDK FRC5-Ax10-xx0x-FA FRC5-Ax10-xxDx-FA FRC5-Ax14-xx0x-FA FRC5-Ax16-xx0x-FA Polarizing Key Sign DDK 5-1T DDK C H 5 -1T FRC5-Ax20-xx0x-FA FRC5-Ax50～Ax64-xx0x-FA FRC5-Ax60-xxCx-xxCx-FA Ａ 11.05 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 B DDK FRC5-Ax10-xx0x-FA FRC5-Ax10-xxDx-FA FRC5-Ax14-xx0x-FA FRC5-Ax16-xx0x-FA FRC5 Series Unit：mm ○ Cover, Strain Relief Polarizing Key Sign DDK 5-1T DDK C 5 -1T Open-end Cover H FRC2-50-022 FRC5-Ax20-xx0x-FA FRC5-Ax50～Ax64-xx0x-FA FRC5-Ax60-xxCx-xxCx-FA Number of Contact 11.05 Ａ Part Number Closed-end Cover FRC2-50-032 Number of Contact 11.05 Ａ Inspection Hole Less than 16 Contacts：１ More than 20 Contacts：３ Number of Contact A FRC2-10-0XX 10 17.27 FRC2-14-0XX 14 22.35 FRC2-16-0XX 16 24.89 FRC2-20-0XX 20 29.97 FRC2-26-0XX 26 37.59 FRC2-30-0XX 30 42.67 FRC2-34-0XX 34 47.75 FRC2-40-0XX 40 55.37 FRC2-50-0XX 50 68.07 FRC2-60-0XX 60 80.77 FRC2-64-0XX 64 85.85 Note:Cloosed-end cover for 64 contacts are not available. Strain Relief FRC2-50-042 Number of Contact 7.8 5.1 Ａ ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 FRC5 Series Unit：mm ○ Header Connector FRC5-C26L51T-0L-FA Number of Contact 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64 FA： Lead Free Contact Style L：Right Angle S：Straight Lock Lever L： Long Lock S： Short Lock Contact Tail Length Polarizing Key 0：10・・・・・・・・・・・・・・ No Key 4： G=3.94 5： G=2.9 (Standard) 14, 16, 20, 26, 30, 34, 40・・・ 1 Key 50, 60, 64・・・・・・・・・・・ 2 Keys (H=22.86mm) Contact Plating 1：Au(0.8 μ ) over Ni Plating 2：Au(0.4 μ ) over Ni Plating 3：Au(Flash) over Ni Plating A：50, 60, 64・・・・・・・・・・ 1 Key C：60, 64・・・・・・・・・・・・・ 2 Key (H=27.94mm) D：10・・・・・・・・・・・・・・ 1 Key Plating Termination Area) T：Sn-Ag Plating (E) (E) □0.64 □0.64 2.54 J 0.64×0.5 D C X 6.2 10.56 17.4 G J G Sec. Ｘ－Ｘ Header with Short Lock 0.64×0.5 Sec. Ｘ－Ｘ ＦＲＣ５－ＣＸＸＬＸＸＸ－ＸＸ－ＦＡ ＦＲＣ５－ＣＸＸＳＸＸＸ－ＸＸ－ＦＡ 0.64 Header without Lock Lever 0.5 Contact Section K K K K DD 5S31 G 4.35 DD 8.2 8.5 C16 ０１ ・１・ ８３ ０１ ・１・ ８３ FRC5-C10XXXX-DX-FA FRC5-C14XXXX-0X-FA FRC5-C16XXXX-0X-FA Polarizing Key Sign 2-∅2.62 K 2 C34 DD ９１・１・０１ 2 C50 ８３・１・０１ 5S31 G 5S31 G DD K C Ｙ H DDK Marking Tail Style/Plating ▽ Marking FRC5-C34～C40XXXX-0X-FA ＦＲＣ５－Ｃ２０～Ｃ３０ＸＸＸＸ－0Ｘ-FA Part Number FRC5-C10XXXX-XX-FA Number of Contact A B 10 32.00 21.84 16 39.62 29.46 FRC5-C14XXXX-XX-FA 14 FRC5-C20XXXX-XX-FA 20 FRC5-C16XXXX-XX-FA FRC5-C26XXXX-XX-FA FRC5-C30XXXX-XX-FA 37.08 FRC5-C60XXXX-XX-FA 0.74±0.1 2.54±0.1 FRC5-C64XXXX-XX-FA 42.4 24.3 35.56 53.2 26.7 50.0 24.3 37.84 52.32 40.64 48.00 72.64 60.96 70.10 59.94 100.58 26.7 30.48 40 64 45.6 42.16 47.24 50 ∅0.9 +0.08 82.80 0 60 95.50 27.94 25.14 57.40 FRC5-C50XXXX-XX-FA FRC5-C40XXXX-XX-FA J 17.78 30 62.48 E 17.52 22.86 34 J 10.16 34.54 FRC5-C34XXXX-XX-FA Short Lock E F 44.70 52.32 Long Lock D 15.24 85.34 90.42 35.56 48.26 73.66 78.74 22.60 33.02 30.22 40.64 42.92 53.34 55.62 68.32 81.02 86.10 Polarizing Key FRC5-C60XXXX-CX-FA C 26.92 26 FRC5-C50～C64XXXX-0X-FA FRC5-C50～C64XXXX-AX-FA 2.54±0.1 Ｙ Lot No. DD K 01 2 5S31 G C26 5S31 G ８３・１ C14 5S31 G FRC5-C10XXXX-0X-FA 2 2 C10 ０１ ・１・ ８３ 2 2 5S31 G ０１ ・１・ ８３ F 2-∅2.6 C10 DD 2 DD A 17.4 X B 0.4 3.04 φ0.75 max. 48.26 58.42 66.04 78.74 91.44 50.7 58.3 65.9 71.0 76.1 83.7 96.4 109.1 96.52∅0.9114.2 0 +0.08 26.7 26.7 26.7 26.7 26.7 26.7 26.7 26.7 26.7 47.5 55.1 62.7 67.8 72.9 80.5 93.2 105.9 111.0 24.3 24.3 24.3 24.3 24.3 24.3 24.3 24.3 ２±0.1 24.3 ∅３． （Nominal Diameter ３ Tapping ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 2.54±0.1 4 0.25±0.1 http://www.ddknet.co.jp 注１ 2.54±0.1 Tail Style/Plating ▽ Marking FRC5-C34～C40XXXX-0X-FA ＦＲＣ５－Ｃ２０～Ｃ３０ＸＸＸＸ－0Ｘ-FA +0.08 0 FRC5 Series 2.54±0.1 0.74±0.1 Recommended PCB Mounting Dimensions +0.08 0 ∅0.9 ∅３． ２±0.1 ∅３． ２±0.1 +0.08 0 ∅0.9 注１ +0.08 0 0.25±0.1 ∅0.9 注１ 2.54±0.12.54±0.1+0.08 ∅0.9 2.54±0.1 0.74±0.1 C±0.12 C±0.12 B±0.15 B±0.15 ∅３． ２±0.1 0 （Nominal Diameter ３ Tapping Screw） C±0.12 C±0.12 F±0.15 F±0.15 Right Angle Right Angle Straight Straight 0.25±0.1 2.54±0.12.54±0.1 注１ 2.54±0.1 Unit：mm （Nominal （Nominal Diameter ３Diameter Tapping ３ Screw） Tapping Screw） (Soldering Side) 2.54±0.1 Polarizing Key FRC5-C60XXXX-CX-FA 0.25±0.1 ∅0.9 2.54±0.1 +0.08 0 ○ Header Connector 2.54±0.1 C±0.12 C±0.12 B±0.15 F±0.15 Right Angle Straight ※１ When using M2.6 screw, the hole diameter should be ∅2.8. When using nominal diameter 3 tapping screw, the hole diameter should be ∅3.2. 15.4 7 15.4 3.2 15.4 3.2 17.85 7 Short Lock Spring pin (FRC2-02) (FRC-03) 3.2 (FRC2-01) 5 3.2 Long Lock 7 5 17.85 3.2 17.85 5 3.2 0.74±0.1 2.54±0.1 2.54±0.1 ∅0.9 FRC5-C50～C64XXXX-0X-FA FRC5-C50～C64XXXX-AX-FA Assembly Tool(357J-4502) Assemble/disassemble the lock lever ○ Polarizing Key for Socket Part Number：HU-005 HU-005 consists HU-005-1 AND HU-005-2. Material / Finish : Polyamide (UL94V-0) / Natural Color HU-005-1 HU-005-1 Material / Finish : Polycarbonate (UL94V-0) / Black HU-005-2 HU-005-1 ○ Key Guide for Header Part Number ：HU-006 HU-005-2 HU-005-2 ※ When connectors having same number of contacts are used side by side, key guide can prevent from mis-mating. 10（No key)and16 contacts are not applicable. HU-006 HU-006 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp FRC-001 5 FRC-001 FRC5 Series Unit：mm ○ Cable Assembly Configurations Cable No. and Contact Position ○ Assembly Tool ● Cable Cutting Tool ：357J-4256 ● Termination Tool ：357J-4674D（Press） ：357J-4664N（Attachment） ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 6