modules

TABLE
OF
CONTENTS
CONNECTOR TO TERMINAL
BLOCK MODULES
GENERAL PURPOSE/
INTERFACE RELAYS
Compact and reliable connections between
high density connectors and high quality
screw-cage clamp terminal blocks; DIN Rail
mountable
Page . . . . . . . . . . . . . . . . . . . . . . .6-7
A selection of DIN Rail mountable general
purpose relays available for up to 12 A @
250 Volts.
DIODE MODULES &
COMPONENT CARRIERS
PLUGGABLE
SLIMLINE RELAYS
Add additional components to build circuits
and diode modules mounted on 35 or
32mm DIN Rails.
Need Text
Page . . . . . . . . . . . . . . . . . . . . .27-29
Page . . . . . . . . . . . . . . . . . . . . .30-31
Page . . . . . . . . . . . . . . . . . . . . . .8-10
MONITORING PROTECTION
MODULES
Special purpose components connected to
screw-cage clamp terminal blocks; DIN Rail
mountable.
Page
. . . . . . . . . . . . . . . . . . . . . . .11
I/O MODULE CARRIERS
Accepts industry standard I/O modules.
LED indicator and fuse protection included
on carrier.
Page . . . . . . . . . . . . . . . . . . . . .32-33
RELAY MODULES
SOLID STATE I/O MODULES
Traditional relay modules from 1-16
channels. Available in several voltages (AC
& DC), isolated or bussed systems. DIN Rail
mounted.
Input/Output Modules (both AC and DC)
provided on a DIN mountable module.
Bussed and isolated versions available.
Page . . . . . . . . . . . . . . . . . . . . .12-17
SAFETY RELAY MODULES
Force-guided contact modules available in
1-16 channels, 12 and 24VDC coils and
isolated or bussed systems. All mountable
on 32 or 35mm DIN Rails.
Page . . . . . . . . . . . . . . . . . . . . .18-25
Page . . . . . . . . . . . . . . . . . . . . .34-35
POWER SUPPLIES
Basic and High Performance Series. DIN
Rail mountable units are available with 12
or 24VDC output, 15 to 60 Watts and
regulated outputs.
Page . . . . . . . . . . . . . . . . . . . . .36-42
CUSTOM MODULES
MOUNTING TRACKS
Altech provides quick turn-key custom
designs and competitive solutions.
DIN Rail or panel mount mounting tracks
secure standard or custom printed circuit
boards in control panels or cabinets.
Page
. . . . . . . . . . . . . . . . . . . . . . .26
Page . . . . . . . . . . . . . . . . . . . . .44-45
Intro . . . . . . . . . . . . . . . . . . . . . . .4-5
Index . . . . . . . . . . . . . . . . . . . . .46-47
Terms and Conditions . . . . . . . . . . . .50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
3
Link incompatible hardware or expand the
capabilities of logic systems with Altech interface
and electronic modules and carriers. These DIN Rail
or panel mounted printed circuit board modules,
subsystems and carriers give design flexibility,
simplify panel layouts and reduce maintenance
and downtime.
Altech’s compact interface modules provide a
flexible, cost effective transition from Sub-D,
Ribbon Cable and other connectors to
terminal blocks.
Altech’s electronic modules include Diode, Fuse,
Varistor, Optocoupler (I/O), Relay, power supplies
and custom modules.
If your needs go beyond our comprehensive range
of standard interface and electronic modules,
Altech can custom design a module to meet even
the most sophisticated requirements.
Modules are supplied completely assembled with
ready to wire screw-cage terminal blocks in an
extruded track. The track can be mounted on 35
or 32mm DIN Rail or can be panel mounted.
Select individual components and mount your own
electronic boards with Altech mounting tracks.
MODULES
4
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
CONNECTOR-TO-TERMINAL BLOCK
DIODE MODULES & COMPONENT CARRIERS
Compact and reliable transitions
between high density connectors
and high quality screw-cage
clamp terminal blocks.
Use our Diode Modules to build lamp test circuits,
decouple signals, etc. Mount your own
components into our Component Carriers
(supplied without electronic components). Or,
tell us what you need and we’ll install it for you.
• FBK Ribbon Cable, up to 64 poles
• Subminiature - D, up to 50 poles
• DM Diode Modules have series connection 1A
or 3A diodes, and 1A diode gates with common
cathodes or anodes, providing commonly used diode arrangements
• BSM Component Carrier has factory installed fork-and eyelet soldering posts in
each series trace
• CCA Component Carrier consists of a printed circuit board with four in-line and two
bus-connection through-holes to solder pads in each trace, complete with
terminal blocks
MINIATURE RELAYS
Traditional relay and safety relay
modules in a high density package.
DIGITAL I/O MODULES
• DIN Mount Solid State I/O Modules
or carriers only
• Accommodates either input
or output modules
• DIN Rail or Panel Mount
• Built-in Fuses, LED Indicator
• Bussed or Isolated configurations
CUSTOM INTERFACE MODULES
If your design or application requires more functionality
or features than our standard product, Altech offers
complete engineering, prototype and production
services for custom modules.
Our staff has the ability to take your design or
requirements and manufacture your custom module.
Custom module production generally includes
engineering, PCB layout and prototypes, packaged in
Altech extrusions for mounting on panels or DIN Rail. In
many industrial control systems, customized designs are
the solution for many problems.
Altech provides a quick turnaround and competitive
solution to your problem.
•
•
•
•
Protect equipment
Provide insulation
Control motors, solenoid and valves
Safety relays for emergency stop, safety gate and two-hand stop
POWER SUPPLIES
•
•
•
•
No Ground circuit contamination
4 Models available
DIN Rail or Panel Mount
Developed to meet US Government Guidelines
Application Assistance
Modify a standard product
Help define a new product
Engineering Capability
Use of latest CAD system
PCB layouts completed promptly
Prototypes available two weeks after
PCB layout approval
Manufacturing Capability
Complete in-house manufacturing
ISO 9001 Certified
Minimum Quantities
25 piece minimum for custom quotes
Quotation provided at no cost
Altech Benefits
Fast turnaround due to in-house capability
Highly competitive in-house manufacturing
Use of Altech components (blocks,
extrusions, connectors)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
5
CONNECTOR
TO
TERMINAL BLOCK MODULES
SD
Female Sub D
INTERFACES
CONNECTOR-TO-WIRE
Subminiature D Module
35 or 32mm DIN Rail
TS35x7.5 70mm (2.75 in.)
TS32x15 75mm (2.95 in.)
L
.)
in
3
.4
(3
3
m
.4
m
(3
87
m
.)
in
Screw-Cage Clamp Connections
4 to 5 Component Solder Pads Per Linea
.9mm (.035 in.) Component Mtg. Holes
DIN Rail Mount, Panel Mount Available
L
m
Keyed by design, Sub D Modules are
equipped with male or female connectors,
screw-cage clamp terminal blocks, and
component solder pads for easy insertion of
circuit building components. All terminal
blocks are individually marked to correspond to the numbers on the connector pins
or sockets.
•
•
•
•
Wire Range
0.5-4mm2
22-12 AWG
Current
Voltage
4A
250VAC
No. of
Poles
Type
Cat. No.
Module Length (L)
mm (in.)
Sub D, Female Connector
9
15
25
37
50
SD-F9
SD-F15
SD-F25
SD-F37
SD-F50
5745.2
5746.2
5747.2
5748.2
5749.2
45 (1.77)
48 (1.89)
81 (3.19)
114 (4.49)
137 (5.39)
Sub D, Male Connector
Ordering Information
TS35x7.5 70 mm (2.75 in.)
TS32x15 75 mm (2.95 in.)
87
Compact Subminiature D (Sub D) Modules
provide quick and reliable interfaces
between high density connectors (back
shells) with up to 50 poles and discrete
wires. Connector-to-Wire Interface modules
save time and eliminate wiring mistakes. No
special tools are required. Sub D Interface
modules are typically used in communications, data processing, process control and
other industrial applications.
SD
Male Sub D
Wire Range
0.5-4mm2
22-12 AWG
9
15
25
37
SD-M9
SD-M15
SD-M25
SD-M37
5740.2
5741.2
5742.2
5743.2
45 (1.77)
48 (1.89)
81 (3.19)
114 (4.49)
1
1
1
1
50
SD-M50b
5744.2
137 (5.39)
1
20 21 22 23 24 25
34 35 36 37
17 16 15
Center
Row #'s
33 32 31
50 49 48
1 2 3
Shell
Ground
20 21 37
17 18 19
1 2 3 4 5 6
13 14 15 16 17 18 19
20 21 22 23 24 25
32 33 34 35 36 37
4 3 2 1
20 19 18
36 35 34
not have component solder pads.
SD-M50 is only available with a 1.5A current rating.
1 2 3 4 5 6
26 27 28 29 31 31
19 20 21 22 23 24 25
44 45 46 47 48 49 50
Female Connector SD-F50
50 Pin Socket Female Connector Shown with no component solder pads
16 17 18 19
Shell
Ground
35 36 37
13 14 15 16 17 18 19
32 33 34 35 36 37
Male Connector SD-M37
37 Pin Male Connector Shown with component mounting holes
(pads are on solder side)
1 2 3
Center
Row #'s
18 19 20
34 35 36
14 15 16 17
31 32 33
48 49 50
45° Ground
Terminal
45° Ground
Terminal
SD-F50 and SD-M50 are double-sided boards and do
Std.
Pk.
1
1
1
1
1
Female Connector SD-F37
37 Pin Socket Female Connector Shown with component counting holes
(pads are on solder side)
6
250VAC
Module Length (L)
mm (in.)
1 2 3 4 5 6
b
4A
Cat. No.
1 2 3
a
Voltage
Type
20 21 37
Std.
Pk.
Current
1 2 3 4 5 6
26 27 28 29 31 31
19 20 21 22 23 24 25
44 45 46 47 48 49 50
Male Connector SD-M50
50 Pin Male Connector Shown with no component solder pads
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
CONNECTOR
TO
TERMINAL BLOCK MODULES
FBK
Ribbon Cable
INTERFACES
CONNECTOR-TO-WIRE
Ribbon Cable Module
35 or 32mm DIN Rail
Compact Ribbon Connector Modules
provide an interface between multi-wire flat
cables outfitted with IDC connectors and
discrete wires. Up to 64 conductors can be
terminated saving time and eliminating
wiring mistakes.
L
87
m
m
3
.4
(3
No special wiring or tools are required.
Ribbon Cable
Interface Modules are
typically used in communications, data processing, process control and other industrial
applications.
TS35x7.5 70mm (2.75 in.)
TS32x15 75mm (2.95 in.)
.)
in
FBK Ribbon Cable Modules are supplied
with short strain relief ejector latches (long
ejector latches are available), screw-cage
clamp terminal blocks and component solder
pads for easy insertion of circuit building
components. All terminal blocks are
individually marked to correspond to the
numbers on the header pins.
•
•
•
•
•
Screw-Cage Clamp Connections
Up to 64 Poles
4 to 5 Component Solder Pads Per Line
.9mm (.035 in.) Component Mtg. Holes
DIN Rail Mount, Panel Mount Available
Ordering Information
Ribbon Cable Module with
Short Ejector Latches
To order long ejector latches, specify Cat. No.
with /L suffix. Example: Cat. No. 5727.2/L.
Wire Range
0.5-4mm2
22-12 AWG
No. of
Poles
Type
Cat. No.
10
14
16
20
26
34
40
50
60
64
FBK10
FBK14
FBK16
FBK20
FBK26
FBK34
FBK40
FBK50
FBK60
FBK64
5720.2
5721.2
5722.2
5723.2
5724.2
5725.2
5726.2
5727.2
5728.2
5729.2
Current
Voltage
3A
250V AC
Module Length (L)
mm (in.)
47 (1.85)
47 (1.85)
69 (2.72)
69 (2.72)
80 (3.15)
103 (4.06)
114 (4.49)
148 (5.83)
170 (6.68)
170 (6.68)
2 46 8
2 4 6 8 10 12
1
1
1
1
1
1
1
1
1
1
64
1 35 7 9
1 3 5 7 9 11
Std.
Pk.
63
51 53 55 57 59 61 63
52 54 56 58 60 62 64
Model FBK64
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
7
DIODE MODULES & COMPONENT CARRIERS
DM
Diode Module
INTERFACES
Diode Module
35 or 32mm DIN Rail Mount
TS35x7.5 56mm (2.21 in.)
TS32x15 61mm (2.40 in.)
Specifications:
L
Diode: 1N5408 or equivalent
Rated Current: 3A
Maximum Blocking Voltage - 1000V DC
m
3
.4
(3
No. of
Diodes
.)
in
Ordering Information
Rated Bus Current: 10A
(12A at 30˚C (86˚F) Temperature Rise)
m
Standard modules include series connection
diode circuits in 1 Amp and 3 Amp versions,
and diode gates with bussed anodes or
cathodes.
• Screw-Cage Clamp Connections
• Special Configurations Available
• DIN Rail Mount, Panel Mount Available
Diode: 1N4007 or equivalent
Rated Current: 1A
87
Wire individually labeled diodes into
existing circuits for freewheeling, DC
inductive kick suppression (commutating),
reverse DC polarity protection, etc. Use
bussed diodes for distribution of logic Vcc or
ground, or gather and decouple electrical
signals for lamp testing or collective fault
messages. Use as commutating diodes
across inductive loads such as DC relays,
solenoid valves, actuator magnets, etc. to
suppress voltage surges.
Wire Range
0.5-4mm2
22-12 AWG
Voltage
250V
Diode
Type
Cat. No.
Module Length
(L) mm (in.)
Std.
Pk.
Series Connection, 1A diodes
Series Connection, 1A diodes
Series Connection, 1A diodes
Series Connection, 1A diodes
Series Connection, 1A diodes
Series Connection, 1A diodes
4
8
12
16
20
24
1N4007
1N4007
1N4007
1N4007
1N4007
1N4007
DM4-S
DM8-S
DM12-S
DM16-S
DM20-S
DM24-S
8971.2
5702.2
5703.2
8973.2
8974.2
8975.2
24 (0.95)
44 (1.73)
64 (2.52)
92 (3.62)
112 (4.41)
132 (5.20)
1
1
1
1
1
1
Series Connection, 3A diodes
Series Connection, 3A diodes
Series Connection, 3A diodes
Series Connection, 3A diodes
Series Connection, 3A diodes
Series Connection, 3A diodes
4
8
12
16
20
24
1N5408
1N5408
1N5408
1N5408
1N5408
1N5408
DM4-S3
DM8-S3
DM12-S3
DM16-S3
DM20-S3
DM24-S3
8971.3
5702.3
5703.3
8973.3
8974.3
8975.3
24 (0.95)
44 (1.73)
64 (2.52)
92 (3.62)
112 (4.41)
132 (5.20)
1
1
1
1
1
1
Bussed Anodes, 1A diodes
Bussed Anodes, 1A diodes
Bussed Anodes, 1A diodes
6
14
22
1N4007
1N4007
1N4007
DM6-A-S
DM14-A-S
DM22-A-S
8842.2
5704.2
5705.2
30 (1.18)
50 (1.97)
70 (2.75)
1
1
1
Bussed Cathodes, 1A diodes
Bussed Cathodes, 1A diodes
Bussed Cathodes, 1A diodes
6
14
22
1N4007
1N4007
1N4007
DM6-K-S
DM14-K-S
DM22-K-S
8850.2
5706.2
5707.2
30 (1.18)
50 (1.97)
70 (2.75)
1
1
1
8
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
DIODE MODULES & COMPONENT CARRIERS
CCA
Component Carrier
INTERFACES
Component Carriers
35 or 32mm DIN Rail
Use Component Carriers to modify and/or
build circuits to meet special requirements.
Type CCA requires removal of the single
solder-side printed circuit board from the
mounting track for soldering of components.
Posts or through-leads can be installed for
future field connections. Contact Altech for
custom installation of solder posts.
(3
.4
3
in.
in
)
.)
Component Carrier
with fork-and-eyelet solder posts
8 Channel
12 Channel
4
8
12
16
20
24
mm
43
Component Carrier
without solder posts
No. of
Poles
87
.
(3
Ordering Information
L
L
m
m
• Screw-Cage Clamp Connections
• Terminal Blocks are Numbered for Easy
Wire Identification
• DIN Rail Mount, Panel Mount Available
Wire Range
0.5-4mm2
22-12 AWG
Current/Line
Voltage
6A
(12A Busa)
250V
Type
Cat. No.
Module Length
(L) mm (in.)
CCA4
CCA8
CCA12
CCA16
CCA20
CCA24
8835.2
8836.2
8837.2
8838.2
8839.2
8840.2
24 (.87)
44 (1.65)
64 (2.44)
84 (3.23)
104 (4.02)
124 (4.80)
16
24
Wire Range
0.5-4mm2
26-14 AWG
Current/Channel
Voltage
5A
250V
Type
Cat. No.
Module Length
(L) mm (in.)
BSM8-S
BSM12-S
5700.2
5701.2
47 (1.85)
69 (2.72)
Std. Pk.: 1
Std. Pk.: 1
3.0mm
(.118 in.)
TS35x7.5 56mm (2.20 in.)
TS32x15 61mm (2.40 in.)
TS35x7.5 56mm (2.20 in.)
TS32x15 61mm (2.40 in.)
87
Type BSM allows field additions of diodes for
decoupling, line crossovers for testing or
multiplying tie-in terminals for a line.
Pre-installed flat, fork-and-eyelet soldering
posts allow component-side mechanical and
solder connections with minimum disruption
to wiring and mounted devices.
BSM
Component Carrier
2.81mm
(.11 in.)
1.32mm
(.05 in.)
.90mm (.035 in.)
Solder Post
a
Printed Circuit Board Trace Rating.
Series Trace: 6A
Bus Trace: 12A
Terminal Block Rating: 15A
CCA Type
BSM Type
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
9
DIODE MODULES & COMPONENT CARRIERS
DIPC
Dip Socket Carrier
INTERFACES
Dip Socket Carrier - 3 Amp
35 or 32mm DIN Rail Mount
Enhance design capabilities with Dual InLine Package (DIP) Socket Carriers, the most
versatile socket available. Use our DIPCs for
reed-relays, power relays, photo-isolated
Input/Output modules, in-line switches, thin
film resistors and more. The Altech DIPC is
rated 3 Amp and is available in 14, 16 and
20 pin socket configurations. Each DIPC
module has several component solder pads
for loading circuit-building components.
• Screw-Cage Clamp Connections
• 4 to 5 Component Solder Pads Per Line
• .9mm (.035 in.) Component Mtg. Holes
• DIN Rail Mount, Panel Mount Available
Typical Applications:
14 Pin
Magnecraft® Classes 107, 171, 172;
S-D® Series MRR-D; Hamlin® 700;
Dale® TDP14 Resistors; etc.
16 Pin
Most P&B® including T85 Hi Sens and
I/O Modules IA, OA, OD16;
Midtex® 190 Power;
Augat® Alcoswitch® GD, AD Series, etc.
20 Pin
C&K® BD series switches;
Grayhill® 79 coded switches;
AMP® 7600 shunts; etc.
Ordering Information
TS35x7.5 70 mm (2.75 in.)
TS32x15 75 mm (2.95 in.)
mm
(3
.4
3
in.
)
Wire Range
0.5-4mm2
22-12 AWG
Type
Altech’s voltage regulator modules provide a
well-regulated output voltage from an
unregulated source. Each module may be
operated at an output voltage from 1.2 to
33V. A 2 Amp fuse is included on the
module.
• Output voltage from 1.2 to 33 V*
• 2 A output current
• Line regulation is .005% (typical)
• 0.3% Load regulation (typical)
• 86 dB ripple rejection @ 120 Hz (typical)
• Easy access to voltage adjustment
• Other configurations available upon request
L
87
Voltage
Regulator
Current
Voltage
3Aa
250V
Module Length
Cat. No.
(L) mm (in.)
DIP Socket Carrier, 14 Pin
DIPC14
8937.2
45 (1.77)
DIP Socket Carrier, 16 Pin
DIPC16
8938.2
56 (2.20)
DIP Socket Carrier, 20 Pin
DIPC20
8939.2
56 (2.20)
Voltage
1-2 - 33V
Module Length
Cat. No.
(L) mm (in.)
8804.3
45mm
a
Current Ratings
Printed Circuit Traces: 3.5A
Terminal Blocks: 15A
Dip Socket: 3A
10
7.62 mm (.300 in.)
7.62 mm (.300 in.)
7.62 mm (.300 in.)
Std. Pk.: 1
*Note: Maximum input/output voltage
differential: +35V.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
MONITORING PROTECTION MODULES
Surge Suppressor Module
Indicator Module
Fuse Module
INTERFACES
35 or 32mm DIN Rail
INTERFACES
35 or 32mm DIN Rail
INTERFACES
35 or 32mm DIN Rail
Protect circuits from overloads and short
circuits. 3 or 6 vertical fuse holders have
slotted screw caps for convenient fuse
replacement (5x20 mm fuses). Modules with
common bus are available upon request.
Monitor control functions and sequences to
detect problems quickly and efficiently. The IM
Indicator Modules are furnished with 7 red
LEDs per module, and are available for
various input voltages from 5 to 60V DCc.
Labels can be adhered to the board next to
LEDs (Type B-619, manufactured by Brady®)
Ask about our custom designs.
Protect personnel and equipment from
damaging voltage surges, spikes and
overvoltages from lightning, inductive
switching or electrostatic discharge. Improve
system reliability and reduce downtime with
varistor overvoltage protection.
• Screw-Cage Clamp Connections
• Select 3 or 6 Fuse Holder Module
• DIN Rail Mount, Panel Mount Available
• Screw-Cage Clamp Connections
• DIN Rail Mount, Panel Mount Available
L
87
m
m
.)
in
.)
3
in.
in
.4
3
(3
.4
(3
m
3
)
22-12 AWG
m
87
(3
.4
Wire Range
0.5-4mm2
TS35x7.5 56 mm (2.20 in.)
TS32x15 61 mm (2.40 in.)
L
L
mm
Screw-Cage Clamp Connections
Prevent Arcing at Contacts
Absorb Switching Energy
DIN Rail Mount, Panel Mount Available
TS35x7.5 56 mm (2.20 in.)
TS32x15 61 mm (2.40 in.)
TS35x7.5 70 mm (2.75 in.)
TS32x15 75 mm (2.95 in.)
87
•
•
•
•
Current
6.3Ab
Voltage
250 V AC
Type
Cat. No.
Module Length
(L) mm (in.)
FM3-E
FM6-E
5712.2
5714.2
24 ( .95)
47 (1.85)
Std. Pk.: 1
Wire Range
0.5-4mm2
22-12 AWG
Wire Range
0.5-4mm2
22-12 AWG
Type
IM7K/5
IM7K/12
IM7K/24
IM7K/60
Std. Pk.: 1
Cat.
No.
Input
VDC
Drop
R
LED
mA
5750.2
5751.2
5752.2
5753.2
4-6
9-15
20-30
50-70
220
1.0K
3.3K
10.0K
12.0
9.6
6.5
5.8
Module Length
(L) mm (in.)
Operating
Volts
Individually Wired Varistors
SSM3-E/50
5730.2
SSM8-E/50
5731.2
SSM3-E/275
5732.2
SSM8-E/275
5733.2
24 ( .95)
47 (1.85)
24 ( .95)
47 (1.85)
50V AC
50V AC
275V AC
275V AC
Common Return
SSM5-R/50d
5734.2
24 ( .95)
50V AC
SSM14-R/50d
5735.2
47 (1.85)
50V AC
SSM5-R/275e
5736.2
24 ( .95)
275V AC
SSM14-R/275e
5737.2
47 (1.85)
275V AC
Type
Cat.
No.
Std. Pk.: 1
b
Maximum per current path.
c
Other DC or AC voltages are available upon request.
d
Max. Surge Current 4,500A.
e
Max. Surge Current 2,500A.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
11
RELAY MODULES
RC1 / RM1
Single Pole Double Throw
INTERFACES
Relay Modules and Carriers
Isolated Channels
35 or 32mm DIN Rail
RC2 / RM2
Double Pole Double Throw
TS35x7.5 71 mm (2.60 in.)
TS32x15 76 mm (2.99 in.)
m )
m in.
8 7 .4 3
(3
Altech Relay Modules provide high density
packaging of miniature general purpose
relays with Single Pole Double Throw (Form
C) and Double Pole Double Throw (2 Form
C) contact configurations and low current
AC and DC coils. Load your own relays in
our RC Relay Carrier, or order the RM Relay
Module complete with relays.
L
L
m )
m in.
87 .43
(3
Isolated channels (no bus) allow control of
each relay by a different logic system, if
necessary. Mix sourcing (positive switching,
Vcc on/off) and sinking (negative switching,
ground on/off) on a single multi-relay
module. Provide spare relay channels for
future needs without committing to a specific
logic power supply, and without committing
coil-drive power for more than one relay at
a time.
TS35x7.5 71 mm (2.60 in.)
TS32x15 76 mm (2.99 in.)
Call us with your custom module
requirements!
•
•
•
•
•
Screw-Cage Clamp Connections
LED Coil Voltage Indicator
Reverse DC Polarity LED Protection
Surge Suppression with DC Coil
DIN Rail Mount, Panel Mount Available
Ordering Information
Module Length
(L) mm (in.)
1 Channel, Coil Voltage
12V DC
24V DC
110V AC
220V AC
21 (0.83)
2 Channel, Coil Voltage
12V DC
24V DC
110V AC
220V AC
40 (1.57)
4 Channel, Coil Voltage
12V DC
24V DC
110V AC
220V AC
79 (3.11)
8 Channel, Coil Voltage
12V DC
24V DC
110V AC
220V AC
157 (6.18)
16 Channel, Coil Voltage
12V DC
24V DC
110V AC
220V AC
311 (12.24)
Current
Voltage
250VAC/
30VDC
10A
Carrier Only
Wire Range
0.5-4mm2
30-14 AWG
Module with Relays
Current
Voltage
2 x 5A
250VAC/
30VDC
Carrier Only
Module with Relays
Type
Cat. No.
Type
Cat. No.
Type
Cat. No.
Type
Cat. No.
RC1E1
RC1G1
RC1U1
RC1X1
8929.5
8933.5
8935.5
8940.5
RM1E1
RM1G1
RM1U1
RM1X1
8929.2
8933.2
8935.2
8940.2
RC2E1
RC2G1
RC2U1
RC2X1
8945.5
8951.5
8953.5
8954.5
RM2E1
RM2G1
RM2U1
RM2X1
8949.2
8951.2
8953.2
8954.2
RC1E2
RC1G2
RC1U2
RC1X2
8929.6
8933.6
8935.6
8940.6
RM1E2
RM1G2
RM1U2
RM1X2
8929.3
8933.3
8935.3
8940.3
RC2E2
RC2G2
RC2U2
RC2X2
8949.6
8951.6
8953.6
8954.6
RM2E2
RM2G2
RM2U2
RM2X2
8949.3
8951.3
8953.3
8954.3
RC1E4
RC1G4
RC1U4
RC1X4
8931.5
8941.5
8942.5
8943.5
RM1E4
RM1G4
RM1U4
RM1X4
8931.2
8941.2
8942.2
8943.2
RC2E4
RC2G4
RC2U4
RC2X4
8955.5
8956.5
8957.5
8959.5
RM2E4
RM2G4
RM2U4
RM2X4
8955.2
8956.2
8957.2
8959.2
RC1E8
RC1G8
RC1U8
RC1X8
8931.6
8941.6
8942.6
8943.6
RM1E8
RM1G8
RM1U8
RM1X8
8931.3
8941.3
8942.3
8943.3
RC2E8
RC2G8
RC2U8
RC2X8
8955.6
8956.6
8957.6
8959.6
RM2E8
RM2G8
RM2U8
RM2X8
8955.3
8956.3
8957.3
8959.3
RC1E16
RC1G16
RC1U16
RC1X16
8932.5
8944.5
8946.5
8948.5
RM1E16
RM1G16
RM1U16
RM1X16
8932.2
8944.2
8946.2
8948.2
RC2E16
RC2G16
RC2U16
RC2X16
8963.5
8972.5
8995.5
8999.5
RM2E16
RM2G16
RM2U16
RM2X16
8963.2
8972.2
8995.2
8999.2
Std. Pk.: 1
12
Contact Ratings
Contact Ratings
Wire Range
0.5-4mm2
30-14 AWG
Std. Pk.: 1
Std. Pk.: 1
Std. Pk.: 1
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
Contact Specifications
Relay Pinout
SPDT Composite Rating:
10A
-Relay Socket:
-Terminal Blocks:
-PCB Trace for Contact Circuit
At 30°C (86°F) temperature rise NC:
Common and NO:
-PCB Trace for Coil Circuit:
At 30°C (86°F) temperature rise
10A
15A
12A
16A
6A
-Relay Contacts, AgNi, Minimum Ratings:
Resistive- At 250VAC and 30VDC:
10A
Inductive - At 250VAC :
7.5A
At 30VDC:
5A
(p.f = 0.4)
-Rated Minimum Breaking Capacity:
2,500 VA Resistive, 1,800 VA Inductive
Coil Circuits
DPDT Composite Rating:
2 x 8A
-Relay Socket:
-Terminal Blocks:
-PCB Trace for Contact Circuit:
At 30°C (86°F) temperature rise:
-PCB Trace for Coil Circuit:
At 30°C (86°F) temperature rise:
10A
15A
10A
10A
6A
2A
-Relay Contacts, AgNi, Minimum Ratings:
Resistive- At 250VAC and 30VDC: 2 x 8A
Rated at 250VAC
Max. Breaking Voltage:
440VAC
“Make” Current:
12A
-Rated Minimum Breaking Capacity:
2,000 VA Resistive
Coil Specifications
Top View
of Module
SPDT
SPDT
Top View
of Module
DPDT
DPDT
-Ambient Temperatures:
40°to +70°C (-40°to +158°F)
Coil
Voltage
VDC
12
24
110
220
Operate
(pull-in)
Max. VDC
18
42
132
264
Drop Out
(Rel.) V
Min. VDC
8.8
17.5
96.0
192.0
Coil
Current
mA
55
20
8.9
4.1
Coil
Resistance
olms
220±15%
1,200±15%
9,000±15%
31,500±15%
Table values are for cold coil at 20°C (68°F) and exclude
coil exterior circuit.
Contact Circuits
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
13
RELAY MODULES
RC1 / RM1
Single Pole Double Throw
INTERFACES
Relay Modules and Carriers
Bussed Channels
35 or 32mm DIN Rail
TS35x7.5 71 mm (2.80 in.)
TS32x15 76 mm (2.50 in.)
TS35x7.5 71 mm (2.80 in.)
TS32x15 76 mm (2.50 in.)
Altech Bussed Relay Modules provide high
density packaging of miniature general
purpose relays with minimal hook-up wiring.
Select from bussed DC Positive (DC Negative
switching), bussed DC Negative (DC Positive
switching), or bussed AC neutral.
L
L
m )
m in.
87 .43
(3
m )
m in.
87 .43
(3
Ideal for traditional mechanical relay
input/output array between a single logic
system and peripheral devices, or between
logic systems in a network as well as their
peripheral and field devices.
RC2 / RM2
Double Pole Double Throw
Load your own relays in our RCB Relay
Carrier, or order the RMB Relay Module
complete with 8 or 16 relays.
Call us with
requirements!
•
•
•
•
•
your
custom
module
Screw-Cage Clamp Connections
LED Coil Voltage Indicator
Reverse DC Polarity LED Protection
Surge Suppression With DC Coil
DIN Rail Mount, Panel Mount Available
Contact Ratings
Wire Range
0.5-4mm2
30-14 AWG
Current
10A
Carrier Only
Ordering Information
Module Length
(L) mm (in.)
8 Channel, Bussed DC+
12V DC(E)
24V DC(G)
125 (4.92)
8 Channel, Bussed DC12V DC(E)
24V DC(G)
125 (4.92)
8 Channel, Bussed AC (N)
110V AC(U)
220V AC(X)
125 (4.92)
16 Channel, Bussed DC+
12V DC(E)
24VDC(G)
248 (9.76)
16 Channel, Bussed DC12V DC(E)
24V DC(G)
248 (9.76)
16 Channel, Bussed AC (N)
110V DC(U)
220V AC(X)
248 (9.76)
Type
Cat. No.
RCB1E8V
RCB1G8V
8912.5
5494.5
RCB1E8G
RCB1G8G
Module with Relays
Type
Wire Range
0.5-4mm2
30-14 AWG
Current
Type
RMB1E8V
RMB1G8V
8912.2
5494.2
RCB2E8V
RCB2E8V
8912.6
5492.5
RMB1E8G
RMB1G8G
8912.3
5492.2
RCB1U8
RCB1X8
5502.5
8913.6
RMB1U8
RMB1X8
RCB1E16V
RCB1G16V
8914.5
5508.5
RCB1E16G
RCB1G16G
RCB1U16
RCB1X16
Voltage
250VAC/
30VDC
2 x 6A
Carrier Only
Cat. No.
Std. Pk.: 1
14
Contact Ratings
Voltage
250VAC/
30VDC
Module with Relays
Type
Cat. No.
8923.5
8924.5
RMB2E8V
RMB2G8V
8923.2
8924.2
RCB2E8G
RCB2G8G
8923.6
8924.6
RMB2E8G
RMB2G8G
8923.3
8924.4
5502.2
8913.3
RCB2U8
RCB2X8
8925.5
8925.6
RMB2U8
RMB2X8
8925.2
8925.3
RMB1E16V
RMB1G16V
8914.2
5508.2
RCB2E16V
RCB2G16V
8926.5
8926.6
RMB2E16V
RMB2G16V
8926.2
8926.3
8921.5
5506.5
RMB1E16G
RMB1G16G
8921.2
5506.2
RCB2E16G
RCB2G16G
8927.5
8927.6
RMB2E16G
RMB2G16G
8927.2
8927.3
5514.5
5514.6
RMB1U16
RMB1X16
5514.2
5514.3
RCB2U16
RCB2X16
8928.5
8928.6
RMB2U16
RMB2X16
8928.2
8928.3
Std. Pk.: 1
Std. Pk.: 1
Cat. No.
Std. Pk.: 1
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
Double Pole Double Throw (DPDT)
Single Pole Double Throw (SPDT)
4
5
2
7
3
1
Coil Circuits
+2 +1
– –
BUS
8
DC Coil Circuit
Bussed DC Positive
(Negative Switching)
8
1
BUS
20mm
(0.79 in.)
Coil Circuit
Repeats for
Additional
Relays
Coil Circuit
Repeats for
Additional
Relays
8
2 1 N N
1
8
Pin Numbers
(see pinout)
Positive Bussed
3
2
1
– –
+ +
-Relay Socket:
-Terminal Blocks:
-PCB Trace for Contact Circuit
At 30°C (86°F) temperature rise:
-PCB Trace for Coil Circuit
At 30°C (86°F) temperature rise:
-PCB Trace for Bus
At 30°C (86° F) temperature rise:
-Relay Contacts, AgCdO, Minimum Ratings
Resistive - At 250VAC and 30VDC:
Inductive - At 250VAC:
At 30VDC:
(p.f. = 0.4)
-Minimum Breaking Capacity:
RELAYS
Contact Circuits
3 4 2
C NO NC Repeats
C NO NC Repeats
6 5 7
Contact Specifications
10A
10A
15A
12A*
4A
16A
10A
7.5A
5A
3
DPDT Composite Rating:
-Relay Socket:
-Terminal Blocks:
-PCB Trace for Contact Circuit:
At 30°C (86°F) temperature rise:
-PCB Trace for Bus
At 30°C (86°F) temperature rise:
-PCB Trace for Coil Circuit:
At 30°C (86°F) temperature rise:
-Relay Contacts, AgCdO, Minimum Ratings
Resistive - At 250VAC and 30VDC:
Rated at 250VAC
Max. Breaking Voltage:
“Make” Current:
-Rated Minimum Breaking Capacity:
2,000 VA Resistive
AC Coil Circuit
Bussed Neutral
4
C NO NC C NO NC C NO NC
NC NO C NC NO C NC
SPDT Composite Rating:
2
C NO NC C NO NC C NO NC
Repeats For
More Relays
Contact Specifications
1
+ +
9 N N
6
Bipolar
16
4
2
Contact
Terminals
Coil Circuit
Repeats for
Additional
Relays
– –
NC NO C NC NO C NC
BUS
1
RELAYS
4
2
3
3
2
Coil
Terminals
4
1
Negative Bussed
N N
Positive Bussed
Coil
Terminals
Circuit View
Is From Top
2 1
Negative Bussed
AC Coil Circuit
Bussed Neutral
8 7
Circuit View
Is From Top
8
1
8
Contact
Terminals
3
2
BUS
Coil Circuit
Repeats for
Additional
Relays
8
1
N N
1
BUS
10 9
8
BUS
Coil Circuit
Repeats for
Additional
Relays
DC Coil Circuit
Bussed DC Positive
(Negative Switching)
6
7.5mm
(0.30 in.)
DC Coil Circuit
Bussed DC Negative or
(Positive Switching)
+8 +7
1
8
7.5mm
(0.30 in.)
DC Coil Circuit
Bussed DC Negative or
(Positive Switching)
Coil Circuit
Repeats for
Additional
Relays
20mm
(0.79 in.)
– –
1
10mm
(0.39 in.)
6
+2 +1
2
Bottom View
+15 +14
4
7mm
(0.28 in.)
PIN DIAMETER
1.3mm, +0.1, –0.0
(0.051 in. +0.004, –0.0)
Relay Pinout
16 15
PIN DIAMETER
1.3mm, +0.1, –0.0
(0.051 in. +0.004, –0.0)
Pin Numbers
(see pinout)
4
C NO NC
6
7
5
C NO NC
Coil Specifications
2 x 8A
10A
15A
8A
8A
16A
1A
2A
Ambient Temperatures:
-40° to +70°C (-40°to +158°F)
Coil
Operate Drop Out
Coil
Coil
Voltage (pull-in)
(Rel.) V Current Resistance
VDC
Max. VDC Min. VDC
mA
olms
12
18
8.8
55
220±15%
24
42
17.5
20
1,200±15%
110
132
96.0
8.9 9,000±15%
220
264
192.0
4.1 31,500±15%
8A
440VAC
12A
Table values are for cold coil at 20°C (68°F) and
exclude coil exterior circuit.
* 12A overall rating, with 12A contact relays soldered directly to
printed circuit board (no socket) are available. Please consult Altech.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
15
RELAY MODULES
RMH1- 1 Channel
Single Pole Double Throw
INTERFACES
Relay Modules - High Current
Isolated Channels - 15 Amp
35 or 32mm DIN Rail
L
L
87
43
.
(3
.
in
)
15A at 250V AC/30V DC
8A at 250V AC/30V DC
(TV-3): 3A at 120V AC
1/3hp at 120V AC
1/2hp at 250V AC
Screw-Cage Clamp Connection
LED Coil Voltage Indicator
Reverse DC Polarity LED Protection
Surge Suppression With DC Coils
Industry Standard Relaysa
DIN Rail Mount, Panel Mount Available
Ordering Information
Relay Module, Coil Voltage
5V DC
6V DC
12V DC
24V DC
48V DC
60V DC
110V DC
6V AC
12V AC
24V AC
50V AC
110V AC
220V AC
240V AC
General Relay Specifications (Typical)
Mechanical Life:
Max. No. of Switching Cycles at Rated Load:
Operate Time (pick-up):
Release Time (drop-out):
Bounce Time:
a
m )
m in.
87 .43
(3
m
m
Typical relay specifications combined with
other module component ratings give
module ratings suitable for many control
applications.
•
•
•
•
•
•
TS35x7.5 71 mm (2.80 in.)
TS32x15 76 mm (2.50 in.)
TS35x7.5 70 mm (2.75 in.)
TS32x15 75 mm (2.95 in.)
A true high-current rating in a DIN Rail
mount miniature relay module. The miniature
relays used in the Altech RMH have a SPDT
(Form C) 16 Amp continuous current rating,
developed from dual 8 Amp contacts that
are internally connected in parallel. The
relay socket is rated dual 8 Amp. Printed
circuit traces are balanced, rated 16 Amp
and connect to Altech terminal blocks UL
rated 15A/300V.
Resistive:
Inductive:
Tungsten
Motor:
RMH4 - 4 Channel
Single Pole Double Throw
30 x 106 ops
1200 ops/hr
9ms
3ms
2ms
Catalog specifications from several manufacturers of
Wire Range
0.5-4mm2
30-14 AWG
Current
15A
Contact Ratings
Voltage
250VAC/
30VDC
Contact Ratings
Wire Range
0.5-4mm2
30-14 AWG
Current
Voltage
250VAC/
30VDC
Type
Cat. No.
LEDc (2mA)
15A
Type
Cat. No.
LEDb (2mA)
RMH1B
RMH1C
RMH1E
RMH1G
RMH1J
RMH1K
RMH1M
8905.2
8906.2
8907.2
5800.2
5802.2
8908.2
5803.2
Yellow
Green
Red
Yellow
Green
Red
Red
RMH4B
RMH4C
RMH4E
RMH4G
RMH4J
RMH4K
RMH4M
8905.3
8906.3
8907.3
5800.3
5802.3
8908.3
5803.3
Yellow
Green
Red
Yellow
Green
Red
Red
RMH1N
RMH1R
RMH1S
RMH1T
RMH1U
RMH1X
RMH1Y
8909.2
8910.2
5801.2
8911.2
5804.2
5805.2
5806.2
Green
Red
Red
Red
Yellow
Green
Red
RMH4N
RMH4R
RMH4S
RMH4T
RMH4U
RMH4X
RMH4Y
8909.3
8910.3
5801.3
8911.3
5804.3
5805.3
5806.3
Green
Red
Red
Red
Yellow
Green
Red
Std. Pk.: 1
Std. Pk.: 1
Module Length (L) 21mm (0.83 in.)
Module Length (L) 79mm (3.11 in.)
b
c
For alternate LED colors, please consult Altech.
For alternate LED colors, please consult Altech.
the 16 Amp (dual 8 Amp) relay are available, please
consult Altech.
16
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
DC Coil Circuit
DC Coil Circuit Specifications (Typical)
Ambient temperature range: -40° to 70°C (-40° to 158°F)
Table values are for cold coil at 20°C (68°F) and exclude coil exterior circuit.
Coil
Voltage
V AC
5
6
12
24
48
60
110
Operate
(pull-in) V
Max. V AC
3.5
4.2
8.7
16.8
33.6
42.0
77.0
Drop-Out
(rel.) V
Min. V AC
0.5
0.6
1.2
2.4
4.8
6.0
11.0
Coil
Current
mA(50/60Hz)
92.6
88.2
44.4
21.8
11.4
9.2
4.8
Coil
Resistance
Ohms
54±15%
68±10%
270±10%
1,100±15%
4,200±15%
6,540±15%
23,100±15%
Diode: 1N4007 or equivalent
AC Coil Circuit Specifications (Typical)
Ambient temperature range: -40° to 60°C (-40° to 140°F)
Table values are for cold coil at 20°C (68°F) and exclude coil exterior circuit.
Coil
Voltage
V AC
6
12
24
50
115
220
240
Operate
(pull-in) V
Max. V AC
4.8
9.6
19.2
40.0
92.0
176.0
176.0
Drop-Out
(rel.) V
Min. V AC
1.8
3.6
7.2
15.0
34.5
66.0
66.0
Coil
Current
mA(50/60Hz)
190/150
90/75
44/35
22/18
11/9
5/4
4.7/4.1
Coil
Resistance
Ohms
15±10%
65±10%
280±10%
1,130±10%
5,600±15%
23,400±15%
23,400±15%
Diode: 1N4007 or equivalent
Contact Specifications (Typical)
Rated Current (Resistive):
Rated Current (Ind. P.F. = 0.4):
At Rated Voltage:
Max. Operating Voltage:
Breaking Current (Resistive):
Breaking Capacity (Resistive):
Contact Material:
Contact Electrical Life:
16A
8A
30V DC, 250V AC
125V DC, 380V AC
25A
4,000VA
AgCdO
Min. 105 ops
(AC Resistive Load)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
17
SAFETY RELAY MODULES
Isolated Channel
Double Pole Double Throw
SAFETY RELAY MODULES
8 Amp Contacts,
35 or 32mm DIN Rail
Altech Safety Relay Modules utilize Relays with
Force-Guided-Contacts that meet or exceed
international standards, TÜV, SA, SUVA, and
UL. They are designed to protect man and
machine as specified in OSHA FR1910
Regulations, a mandatory requirement of the
European Machinery Directive EMD 89.392
EEC. The Safety Relays are used in Safety
Devices such as Emergency Stop Modules,
Safety Gate Monitors, 2-Hand Safety Modules, etc.
Bussed Channel
Double Pole Double Throw
TS35x7.5 71 mm (2.80 in.)
TS32x15 76 mm (2.99 in.)
TS35x7.5 71 mm (2.80 in.)
TS32x15 76 mm (2.50 in.)
L
L
–
+2
+4
Screw-Cage Clamp Connection
LED Coil Voltage Indicator
Reverse DC Polarity LED Protection
Surge Suppression With DC Coils
Industry Standard Relays
DIN Rail Mount, Panel Mount Available
Isolated Channels (No Bus)
Length (L) mm (in.)
1 Channel, Coil Voltage
12V
24V
21 (0.83)
2 Channel, Coil Voltage
12V
24V
40 (1.57)
4 Channel, Coil Voltage
12V
24V
79 (3.11)
8 Channel, Coil Voltage
12V
24V
157 (6.18)
16 Channel, Coil Voltage
12V
24V
311 (12.24)
Bussed Channels
Length (L) mm (in.)
8 Channel, Bussed DC+
12V
24V
125 (4.92)
8 Channel, Bussed DC12V
24V
125 (4.92)
16 Channel, Bussed DC+
12V
24V
248 (9.76)
16 Channel, Bussed DC12V
24V
248 (9.76)
18
+6
m
m n.)
87 3 i
.4
(3
•
•
•
•
•
•
m )
m in.
87 .43
(3
This series of Safety Relay Modules are Double
Pole, Double Throw configurations, and are
available as 1, 2, 4, 8 and 16 isolated
channels and 8 and 16 bussed channels with
12 or 24 VDC coils. Isolated channels allow
control of each relay by a different logic
system, if necessary. There are two inputs for
each relay coil per channel. Bussed channels
allow high density packaging with a common
input for all relays.Safety Relay Modules may
be ordered with three different types of relay contact
material, depending on the actual load current.
+8
+1
+3
+5
+7
Contact Material:
AgCdO+0.2µmAu
Contact Material:
AgNi10+0.2µmAu
Contact Material:
AgNi10+5µmAu
Contact Ratings:
8A(2x5A) 110DC, 250VAC
Contact Ratings:
8A(2x5A) 110DC, 250VAC
Contact Ratings:
8A(2x5A) 110DC, 250VAC
Type/Cat. No.
Type/ Cat. No.
Type/Cat. No.
8949.2C
8951.2C
8949.2N
8951.2N
8949.2S
8951.2S
8949.3C
8951.3C
8949.3N
8951.3N
8949.3S
8951.3S
8955.2C
8956.2C
8955.2N
8956.2N
8955.2S
8956.2S
8955.3C
8956.3C
8955.3N
8956.3N
8955.3S
8956.3S
8963.2C
8972.2C
8963.2N
8972.2N
8963.2S
8972.2S
Type/Cat. No.
Type/Cat. No.
Type/Cat. No.
8923.2C
8924.2C
8923.2N
8924.2N
8923.2S
8924.2S
8923.3C
8924.4C
8923.3N
8924.4N
8923.3S
8924.4S
8926.2C
8926.3C
8926.2N
8926.3N
8926.2S
8926.3S
8927.2C
8927.3C
8927.2N
8927.3N
8927.2S
8927.3S
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
–
Bussed Channel, DPDT
Isolated Channel, DPDT
Relay Pinout
Relay Specifications
PIN DIAMETER
1.3mm, +0.1, –0.0
(0.051 in. +0.004, –0.0)
10mm
(0.39 in.)
4
5
2
7
3
1
6
-Normal Coil Voltage:
-Coil Power Dissipation:
-Max. Switching Voltage:
-Max. Switching Current:
-Max. Switching Power
DC
AC
20mm
(0.79 in.)
8
10 operations/ sec.
15 ms
12 ms
DPDT, 2 FORM C
-Contact Material:
Standard
Optional
Coil Circuits
+2 +1
– –
BUS
+15 +14
DC Coil Circuit
Bussed DC Negative or
(Positive Switching)
+8 +7
+2 +1
– –
Coil Circuit
Repeats for
Additional
Relays
AgNi10+0.2µmAu
AgNi0.15+5µmAu
AgNi10+5µmAu
50x106 operation cycles
-40°+ 60°C
Polyamide 6
15g
-Mechanical Life:
-Ambient Temperature:
-Cover Material:
-Weight:
Coil Specifications
8
Rated
Voltage
12VDC
24VDC
DC Coil Circuit
Bussed DC Positive
(Negative Switching)
Voltage
Range
9.6V-19.2V
19.2V-38.4V
Coil
Resistance
210Ω ± 15%
820Ω ± 15%
BUS
Coil Circuit
Repeats for
Additional
Relays
8
Circuit View
Is From Top
1
– –
+ +
1
2
Positive Bussed
3
Negative Bussed
2
RELAYS
Coil
Terminals
4
1
Top View
of Module
DPDT
200W (2x160W simultaneous)
2000VA (2x1250VA simultaneous)
-Contact Switching Rate:
-Relay Operate Time
-Relay Release Time
-Contact Arrangements
7.5mm
(0.30 in.)
1
12,24 VDC
0.7W
250 VDC, 400 AC
8A(2x5A simultaneous)
3
4
C NO NC C NO NC C NO NC
C NO NC C NO NC C NO NC
Contact
Terminals
Contact Circuits
For Both Isolated and Bussed Channels
3 4
2
C NO NC Repeats
C NO NC Repeats
6 5
7
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
19
SAFETY RELAY MODULES
SAFETY RELAY MODULES
4 Pole Relays, 8 or 10 Amps
4 Pole, 8 Amp
Altech Safety Relay Modules utilize Relays
with Force-Guided-Contacts that meet or
exceed international standards, TÜV, SA,
SUVA, and UL. They are designed to protect
man and machine as specified in OSHA
CFR1910 Regulations, which is a mandatory
requirement of the European Machinery
Directive EMD 89.392 EEC.
TS35x7.5 84.2mm (3.31 in.)
TS32x15 89.2mm (3.50 in.)
L
L
m
m .)
0 in
12 .72
(4
Screw-Cage clamp Connections
LED Coil Voltage Indicator
Reverse DC Polarity LED Protection
Surge Suppression With DC Coil
Din Rail Mount, Panel Mount Available
TS35x7.5 76mm (2.99 in.)
TS32x15 81mm (3.19 in.)
m
m .)
0 in
12 .72
(4
•
•
•
•
•
4 Pole, 10 A
Contact Material*:
AgCd0 + 0.2µmAu
Contact Material*:
AgCd0 + 0.2µmAu
Contact Ratings:
8A(2x5A) 250VDC,400VAC
Contact Ratings:
10A(2x5A) 250VDC, 400VAC
Contacts:
Ordering Information
Length (L) mm (in.)
1 Channel, Coil Voltage
12V
24V
40.10 (1.58)
2 Channel, Coil Voltage
12V
24V
78.20 (3.08)
4 Channel, Coil Voltage
12V
24V
154.40 (6.08)
Contacts:
2N.0 + 2N.C
3N.0 + 1N.C
2N.0 + 2N.C
3N.0 +1N.C
Type/ Cat. No
.Type/ Cat. No.
Type/ Cat. No.
Type/ Cat. No.
156.0A11.1222C
156.0A11.2422C
156.0A11.1231C
156.0A11.2431C
156.0A01.1222C
156.0A01.2422C
156.0A01.1231C
156.0A01.2431C
256.0A11.1222C
256.0A11.2422C
256.0A11.1231C
256.0A11.2431C
256.0A01.1222C
256.0A01.2422C
256.0A01.1231C
256.0A01.2431C
456.0A11.1222C
456.0A11.2422C
456.0A11.1231C
456.0A11.2431C
456.0A01.1222C
456.0A01.2422C
456.0A01.1231C
456.0A01.2431C
Altech Safety Relays are electro-mechanical relays that are mechanically linked together, causing all contacts to move together when the coil is
energized. Force-Guided-contacts are also known as positive-guided-contacts, captive contacts or locked contacts. In addition, our Safety Relays
have Crown Contacts which provide two locations per contacts to improve switching conditions. The Safety Relays are used in Safety Devices such
as Emergency Stop Modules, Safety Gate Monitors, 2-Hand Safety Modules, Safety Light Curtains, etc.
This series of Safety Relay Modules consist of 4 pole relays with two choices of configurations (2NO/2NC or 3NO/1NC), with 8 or 10 Amp
contacts, and are available as 1,2, and 4 isolated channels with 12, or 24 VDC coils. Isolated channels allows control of each relay by a different
logic system, if necessary. There are two inputs for each relay coil per channel. Safety Relay Modules may be ordered with three different types
of relay contact material, depending on the actual load current. The part numbers shown in this data sheet are for our standard contact material,
which is AgCd0 + 0.2µmAu.
* Note: Additional relay contact materials are available upon request. Please contact Altech for additional information.
20
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
4 Pole, 10 Amps
4 Pole, 8 Amps
Relay Specifications - 8 Amps
-Normal Coil Voltage:
-Coil Power Dissipation:
-Max. Switching Voltage:
-Max. Switching Current:
DC Coil Circuits
12,24 VDC
0.6W
250VDC, 400VAC
8A
-Max. Switching Power
DC
AC
200W
2000VA
-Contact Switching Rate:
-Relay Operate Time
-Relay Release Time
-Contact Arrangements
10 operations/ sec.
20 ms
6 ms
2NO/2NC, 3NO/1NC
-Contact Material:
Standard
Contact Circuits
AgSnO2+0.2µmAu
Optional
AgNi10+0.2µmAu
AgNi10+5µmAu
50x106 operation cycles
-25°+ 85°C
Thermoplast
35g
-Mechanical Life:
-Ambient Temperature:
-Cover Material:
-Weight:
Coil Specifications
Top View
of Module
Top View
of Module
Rated
Voltage
12VDC
24VDC
Voltage
Range
8.4V-16.8V
16.8V-33.6V
Coil
Resistance
240Ω ± 15%
960Ω ± 15%
Relay Specifications - 10 Amps
5 6 7 8
1 2 3 4
5 6 7 8
1 2 3 4
-Normal Coil Voltage:
-Coil Power Dissipation:
-Max. Switching Voltage:
-Max. Switching Current:
12,24 VDC
0.75W
250VDC, 400VAC
10A
-Max. Switching Power
DC
AC
240W
2500VA
-Contact Switching Rate:
-Relay Operate Time
-Relay Release Time
-Contact Arrangements
Relay Configurations
2 N.O + 2 N.C
NO Pin (1,2), (5,6)
NC Pin (3,4), (7,8)
Relay Configurations
2 N.O + 2 N.C
NO Pin (3,4), (7,8)
NC Pin (1,2), (5,6)
3 N.O + 1 N.C
NO Pin (1,2), (5,6), (7,8)
NC Pin (3,4)
3 N.O + 1 N.C
NO Pin (3,4), (5,6), (7,8)
NC Pin (1,2)
10 operations/ sec.
27 ms
5 ms
2NO/2NC, 3NO/1NC
-Contact Material:
Standard
AgSnO2+0.2µmAu
Optional
AgNi10+0.2µmAu
AgNi10+5µmAu
30x106 operation cycles
-25°+ 80°C
Thermoplast
75g
-Mechanical Life:
-Ambient Temperature:
-Cover Material:
-Weight:
Coil Specifications
Rated
Voltage
12VDC
24VDC
Voltage
Range
8.4V-19.2V
16.8V-38.4V
Coil
Resistance
192Ω ± 15%
770Ω ± 15%
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
21
SAFETY RELAY MODULES
SAFETY RELAY MODULES
6 Pole Relays, 8 or 10 Amps
6 Pole, 8 Amps
Altech Safety Relay Modules utilize Relays
with Force-Guided-Contacts that meet or
exceed international standards, TÜV, SA,
SUVA, and UL. They are designed to protect
man and machine as specified in OSHA
CFR1910 Regulations, which is a mandatory
requirement of the European Machinery
Directive EMD 89.392 EEC.
L
2N.0 + 4N.C
Ordering Information
Length (L) mm (in.)
1 Channel, Coil Voltage
12V
24V
46.45 (1.83)
2 Channel, Coil Voltage
12V
24V
90.90 (3.58)
4 Channel, Coil Voltage
12V
24V
179.80 (7.08)
TS35x7.5 84.2mm (3.31 in.)
TS32x15 89.2mm (3.51 in.)
L
m
m .)
0 in
12 .72
(4
Screw-Cage clamp Connections
LED Coil Voltage Indicator
Reverse DC Polarity LED Protection
Surge Suppression With DC Coil
Din Rail Mount, Panel Mount Available
TS35x7.5 76mm (2.99 in.)
TS32x15 81mm (3.19 in.)
m
m .)
0 in
12 .72
(4
•
•
•
•
•
6 Pole, 10 Amps
Contact Material*:
AgCdO+0.2µmAu
Contact Material*:
AgCdO+0.2µmAu
Contact Ratings:
8A(2x5A) 250VDC,400VAC
Contact Ratings:
10A(2x5A) 250VDC,400VAC
Contacts:
3N.0 + 3N.C
4N.0 + 2N.C
2N.0 + 4N.C
Contacts:
3N.0 + 3N.C
4N.0 + 2N.C
Type/ Cat. No.
Type/ Cat. No.
Type/ Cat. No.
Type/ Cat. No.
Type/ Cat. No.
Type/ Cat. No.
156.0A12.1224C
156.0A12.2424C
156.0A12.1233C
156.0A12.2433C
156.0A12.1242C
156.0A12.2442C
156.0A02.1224C
156.0A12.2424C
156.0A02.1233C
156.0A02.2433C
156.0A02.1242C
156.0A02.2442C
256.0A12.1224C
256.0A12.2424C
256.0A12.1233C
256.0A12.2433C
256.0A12.1242C
256.0A12.2442C
256.0A02.1224C
256.0A12.2424C
256.0A02.1233C
256.0A02.2433C
256.0A02.1242C
256.0A02.2442C
456.0A12.1224C
456.0A12.2424C
456.0A12.1233C
456.0A12.2433C
456.0A12.1242C
456.0A12.2442C
456.0A02.1224C
456.0A12.2424C
456.0A02.1233C
456.0A02.2433C
456.0A02.1242C
456.0A02.2442C
Altech Safety Relays are electro-mechanical relays that are mechanically linked together, causing all contacts to move together when the coil is
energized. Force-Guided-contacts are also known as positive-guided-contacts, captive contacts or locked contacts. In addition, our Safety Relays
have Crown Contacts which provides two locations per contacts to improve switching conditions. The Safety Relays are used in Safety Devices such
as Emergency Stop Modules, Safety Gate Monitors, 2-Hand Safety Modules, Safety Light Curtains, etc.
This series of Safety Relay Modules consist of 6 pole relays with three configuration choices (2NO+4NC, 3NO+3NC, 4NO+2NC), 8 or 10 Amp
contacts and either 1, 2 and 4 isolated channels with 12 or 24 VDC coils. Isolated channels allow control of each relay by a different logic system,
if necessary. There are two inputs for each relay coil channel. Modules can ordered with three contact materials, dependent upon the actual current
load. The standard contact material is AgCd0+0.2µmAu.
* Note: Additional relay contact materials are available upon request. Please contact Altech for additional information.
22
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
6 Pole, 10 Amps
6 Pole, 8 Amps
Relay Specifications - 8 Amps
-Normal Coil Voltage:
-Coil Power Dissipation:
-Max. Switching Voltage:
-Max. Switching Current:
DC Coil Circuits
12,24 VDC
0.8-1.0 W
250VDC, 400VAC
8A
-Max. Switching Power
DC
AC
200W (2x160W simultaneous)
2000VA (2x1250VA simultaneous)
-Contact Switching Rate:
-Relay Operate Time
-Relay Release Time
-Contact Arrangements
10 operations/ sec.
20 ms
6 ms
2NO/4NC, 3NO/3NC, 4NO/2NC
-Contact Material:
Standard
Contact Circuits
AgSnO2+0.2µmAu
Optional
AgNi10+.0.2µmAu
AgNi10+5µmAu
50x106 operation cycles
-25° + 85°C
Thermoplast
38g
-Mechanical Life:
-Ambient Temperature:
-Cover Material:
-Weight:
Coil Specifications
Top View
of Module
7 8 9 10 11 12
1 2 3 4 5 6
Top View
of Module
7 8 9 10 11 12
1 2 3 4 5 6
Rated
Voltage
12VDC
24VDC
Voltage
Range
8.4V-16.8V
16.8V-33.6V
Relay Specifications - 10 Amps
-Normal Coil Voltage:
-Coil Power Dissipation:
-Max. Switching Voltage:
-Max. Switching Current:
12,24 VDC
1.0 W
250VDC, 400VAC
10A
-Max. Switching Power
DC
AC
240W
2500VA
-Contact Switching Rate:
-Relay Operate Time
-Relay Release Time
-Contact Arrangements
Relay Configurations
2N.0 + 4N.C
NO Pin (1,2), (7,8)
NC Pin (3,4), (5,6), (9,10), (11,12)
Relay Configurations
2N.0 + 4N.C
NO Pin (5,6), (11,12)
NC Pin (1,2), (3,4), (7,8), (9,10)
3N.0 + 3N.C
NO Pin (1,2), (7,8), (9,10)
NC Pin (3,4), (5,6), (11,12)
3N.0 + 3N.C
NO Pin (3,4), (5,6), (11,12)
NC Pin (1,2), (7,8), (9,10)
4N.0 + 2N.C
NO Pin (1,2), (3,4), (7,8), (9,10)
NC Pin (5,6), (11,12)
4N.0 + 2N.C
NO Pin (3,4), (5,6), (9,10), (11,12)
NC Pin (1,2), (7,8)
Coil
Resistance
145Ω ± 15%
600Ω ± 15%
10 operations/ sec.
27 ms
5 ms
2NO/4NC, 3NO/3NC, 4NO/2NC
-Contact Material:
Standard
AgSnO2+0.2µmAu
Optional
AgNi10+0.2µmAu
AgNi10+5µmAu
30x106 operation cycles
-25°+ 80°C
Thermoplast
85g
-Mechanical Life:
-Ambient Temperature:
-Cover Material:
-Weight:
Coil Specifications
Rated
Voltage
12VDC
24VDC
Voltage
Range
8.4V-19.2V
16.8V-38.4V
Coil
Resistance
140Ω ± 15%
570Ω ± 15%
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
23
SAFETY RELAY MODULES
SAFETY RELAY MODULES
10 Pole Relays, 10 Amp Contacts
6 Pole Relays, 4 @ 16 Amps,
2 @ 6 Amps
TS35x7.5 69mm (2.72 in.)
TS32x15 74mm (2.91 in.)
L
L
Screw-Cage clamp Connections
LED Coil Voltage Indicator
Reverse DC Polarity LED Protection
Surge Suppression With DC Coil
Din Rail Mount, Panel Mount Available
3N.0 + 7N.C
Ordering Information
Length (L) mm (in.)
1 Channel, Coil Voltage
12V
24V
103.6 (4.08)
m
m in.)
87 .43
(3
•
•
•
•
•
Type/ Cat. No.
1SIR37212
1SIR37224
6 Pole,
4- 16 Amps, 2- 6 Amps
TS35x7.5 69mm (2.72 in.)
TS32x15 74mm (2.91 in.)
m
m in.)
87 .43
(3
These Safety Relay Modules utilize Relays
with Force-Guided-Contacts that meet or
exceed international standards, TÜV, SA,
SUVA, and UL. They meet the standard
EN50205 for safety relays, UL/94/VO fire
protection, VDE 0106 Protection Class 11,
and VDE 0110/group C 250VAC insulation
class.
10 Pole, 10 Amps
Contact Material:
AgSnO2+0.2µmAu
Contact Material:
AgSnO2+0.2µmAu
Contact Ratings:
10A 250VAC
Contact Ratings:
16A + 6A 250VAC
Contacts:
7N.0 + 3N.C
8N.0 + 2N.C
Type/ Cat. No.
1SIR73212
1SIR73224
Type/ Cat. No.
1SIR82212
1SIR82224
9N.0 + 1N.C
Contacts:
4N.0 @ 16A + 1N.O/1N.C @ 6A
Type/ Cat. No.
Type/ Cat. No
1SIR91212
1SIR91224
1SIP51212
1SIP51224
Altech Safety Relays are electro-mechanical relays that are mechanically linked together, causing all contacts to move together when the coil is
energized. Force-Guided-contacts are also known as positive-guided-contacts, captive contacts or locked contacts. In addition, our Safety Relays
have Crown Contacts which provides two locations per contacts to improve switching conditions. The Safety Relays are used in Safety Devices such
as Emergency Stop Modules, Safety Gate Monitors, 2-Hand Safety Modules, Safety Light Curtains, etc.
This series of Safety Relay Modules consists of 10 pole relays with 10 Amps in four configurations choices (3NO/7NC, 7NO/3NC, 8NO/2NC,
9NO/1NC), and 6 pole relays with 6 and 16 Amp contacts (6 Amp is 1NC/1NC, 16 Amp is 4NO). Relays are available as single channel units
with 12, or 24 VDC coils. Standard contact material for this series is AgSnO2 + 0.2µmAu.
24
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
6 Pole,
4 @ 16Amps, 2 @ 6 Amps
10 Pole, 10 Amps
DC Coil Circuits
Relay Specifications - 10 Pole
-Normal Coil Voltage:
-Coil Power Dissipation:
-Max. Switching Voltage:
-Max. Switching Current:
12,24 VDC
1.3W
250VAC
10A
-Max. Switching Power:
2500VAC
-Contact Switching Rate:
-Relay Operate Time
-Relay Release Time
-Contact Arrangements:
15Hz
15 ms
4 ms
3NO/7NC
8NO/2NC
9NO/1NC
-Contact Material:
AgSnO2+0.2µmAu
10x106 operation cycles
-40° + 70°C
65g
-Mechanical Life:
-Ambient Temperature:
-Weight:
Contact Circuits
Coil Specifications
Rated
Voltage
12VDC
24VDC
Top View
of Module
Top View
of Module
11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10
Relay Configurations
3N.0 + 7N.C
NO Pin (9,10), (11,12), (19,20)
NC Pin (1,2), (3,4), (5,6), (7,8), (13,14),
(15,16), (17,18)
7N.0 + 3N.C
NO Pin (5,6), (7,8), (9,10), (11,12), (15,16),
(17,18), (19,20)
NC Pin (1,2), (3,4), (13,14)
7 8 9 10 11 12
1 2 3 4 5 6
Relay Configurations
4N.0 (16 Amps)
(9,10), (3,4), (11,12), (5,6)
1N.0 + 1N.C (6 Amps)
NO Pin (1,2)
NC Pin (7,8)
Min.
Pick-up
8.4V
16.8V
Coil
Resistance
110Ω ± 15%
440Ω ± 15%
Relay Specifications - 6 Pole
-Normal Coil Voltage:
-Coil Power Dissipation:
-Max. Switching Voltage:
-Max. Switching Current:
Control Contacts
Output Contacts
12,24 VDC
1.3W
250VAC
6A
16A
-Max. Switching Power:
Control Contacts
Output Contacts
1500VA
4000VA
-Contact Switching Rate:
-Relay Operate Time
-Relay Release Time
15Hz
18 ms
5 ms
-Contact Arrangements:
Control Contacts
Output Contacts
INO/1NC
4NO
-Contact Material:
AgSnO2+0.2µmAu
106x106 operation cycles
-40° + 70°C
60g
8N.0 + 2N.C
NO Pin (3,4), (5,6), (7,8),(9,10), (11,12),
(15,16),(17,18),(19,20)
NC Pin (1,2), (13,14)
-Mechanical Life:
-Ambient Temperature:
-Weight:
9N.0 + 2N.C
NO Pin (3,4), (5,6), (7,8),(9,10), (11,12),
(13,14), (15,16),(17,18),(19,20)
NC Pin (1,2)
Coil Specifications
Rated
Voltage
12VDC
24VDC
Min.
Pick-up
8.4V
16.8V
Coil
Resistance
110Ω ± 15%
440Ω ± 15%
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
25
INTERCFACE MODULES INDEX
CUSTOM INTERFACE MODULES
If your design or application requires more functionality or features
than our standard product, Altech offers complete engineering,
prototype and production services for custom modules.
Our staff has the ability to take your design or requirements and
manufacture your custom module. Custom module production
generally includes engineering, PCB layout and prototypes,
packaged in Altech extrusions for mounting on panels or DIN Rail. In
many industrial control systems, customized designs are the solution
for many problems.
Altech provides a quick turnaround and competitive
solution to your problem. Altech provides the following
benefits to your company:
Application Assistance
Modify a standard product
Help define a new product
Engineering Capability
Use of latest CAD system
PCB layouts completed promptly
Prototypes available two weeks after
PCB layout approval
Manufacturing Capability
Complete in-house manufacturing
ISO 9001 Certified
Minimum Quantities
25 piece minimum for custom quotes
Quotation provided at no cost
Altech Benefits
Fast turnaround due to in-house capability
Highly competitive in-house manufacturing
Use of Altech components (blocks,
extrusions, connectors)
26
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
GENERAL PURPOSE / INTERFACE RELAYS
• AC or DC coil
I1-L
• I-Series direct DIN-Rail mountable with
I1-T
I1-OC
SPDT
6A
250 V AC
6A @ 250VAC; 6A @ 24VDC
8 mA/ 24 V
AgSnO2
SPDT
1.2 A
400 VAC
1.2 A/ 400 VAC
8 mA
AgSnO2
SPDT
500 mA
70 VAC
500 mA/ 70 VDC
1 mA
AgSnO2
12, 24 V*
24, 110, 230
0.3-0.6W @ 12/24V
1.8VA @ 230VAC
1W/VA @ 230VAC/DC
5...32 V
24-230 V
0.3 W 5...32 VDC @ 24V
0.3 W 24 VAC/DC
1.6 W 230 V AC/DC
5-32 V
24-230 V
0.3 W 5...32 VDC @ 24V
0.3 W 24 VAC/DC
1.0 W 230 V AC/DC
2 x 107
105
7(AC) 6(DC) / 15(AC) 8(DC)
4kV
1kV
-40 to 55°C
2 x 107
105
10/10
4kV
600 VAC
-40 to 55°C
2 x 107
105
10/10
3kV
600 VAC
-40 to 55°C
I1C-20RD
I1C-20BK
I1C-20BL
screw terminals for PLC applications
• M, G, L plug-in relays for DIN-Panel
mountable sockets, with lockable test
buttons and mechanical flag (M and G)
• LED version available
• Diode module for M-Series and
G-Series available
Contact Specifications
Contact Configurations
Rated Current
Rated Voltage
Rated Load
Min Switching Current
Contact Material
Coil Specifications
Rated Voltage (DC)
Rated Voltage (AC)
Power Consumption
E228916
General Data
Mechanical Life Cycles
Electrical Life Cycles
Operate/Release Time (ms)
Insulation Between Coil & Contacts
Insulation Between Open Contact
Ambient Temperature Range
Accessories
Jumper Links, 20 pole (red, black, blue)
Ordering Codes
I 1
I1-L Series
L
Ordering Codes
I 1
R
T
I1-T Series
Ordering Codes
R
I 1
I1-OC Series
O C
Coil Codes
D012 = 12VDC
D024 = 24VDC
A230 = 230VAC
U024 = 24VAC/DC
U110 = 110VAC/DC
U230 = 230VAC/DC
Coil Codes
D032 = 5...32VDC
U024 = 24VAV/DC
U230 = 230VAC/DC
Coil Codes
D032 = 5...32VDC
U024 = 24VAV/DC
U230 = 230VAC/DC
Other coil voltages on request.
Other coil voltages on request.
Other coil voltages on request.
R
Dimensions
Wiring Diagram: (page 28)
* 24VAC/DC, 110VAC/DC,
230VAC/DC combination also available
80 mm
All dimensions are in millimeters.
To convert to inches, divide by 25.4.
I1C-RD
I1C-BK
I1C-20BL
93.8 mm
6.2 mm
(red)
(black)
(blue)
Shown with
jumper accessory.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
27
GENERAL PURPOSE / INTERFACE RELAYS
L-Series
M-Series
Shown with
accessories.
12, 24, 48, 110, 125
12, 24, 48, 110, 230
1.1W (DC)
1.6VA @ 50Hz
1.9VA @ 60Hz
2 x 107
105
10(AC) 13(DC) / 8(AC) 3(DC)
2kV
1kV
-40 to 70°C
2 x 107
105
15(AC/DC) / 10(AC/DC)
2kV
0.75kV
-40 to 55°C
Ordering Codes
M-Series
Ordering Codes
L-Series
M
2 = 2 pole
4 = 4 pole
L 2
– = Standard
L = +LED
Coil Codes
D012 = 12 VDC
D024 = 24 VDC
D048 = 48 VDC
D110 = 110 VDC
D125 = 125 VDC
A012
A024
A048
A110
A230
=
=
=
=
=
12VAC
24VAC
48VAC
110VAC
230VAC
Other coil voltage on request.
2 = 2 pole
L = +LED
Coil Codes
D012 = 12VDC
D024 = 24VDC
D048 = 48VDC
D110 = 110VDC
D125 = 125VDC
A012
A024
A048
A110
A230
=
=
=
=
=
12VAC
24VAC
48VAC
110VAC
230VAC
Other coil voltages on request.
21.1 mm
27.4 mm
L
6.5
10 mm
1
3
2
4
5
6
7
8
35.5 mm
6.4
34.5 mm
14.2 mm
21.1 mm
Accessories
Socket
Retaining Clip
Diode Module
Jumper Links, 20 pole (red, black, blue)
VM-4T
CM-1/MS35
DM-1
–
VL-2
CL-1
–
–
* 24VAC/DC, 110VAC/DC,
230VAC/DC combination also available
28
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
7.25 5.9 4.7 4
All dimensions are in millimeters.
To convert to inches, divide by 25.4.
12, 24, 48, 110, 125
12, 24, 48, 110, 230
0.9W (DC)
1.9VA @ 50Hz
1.6VA @ 60Hz
27.5 mm
Dimensions
DPDT
12A
250VAC
12A @ 250VAC; 12A @ 24VDC
300mW
AgCd0
0.5 mm
General Data
Mechanical Life Cycles
Electrical Life Cycles
Operate/Release Time (ms)
Insulation Between Coil & Contacts
Insulation Between Open Contact
Ambient Temperature Range
DPDT; 4PDT
5A
250VAC
5A @ 250VAC; 5A @ 24VDC
300mW
AgNi
4.8
Contact Specifications
Contact Configurations
Rated Current
Rated Voltage
Rated Load
Min Switching Current
Contact Material
Coil Specifications
Rated Voltage (DC)
Rated Voltage (AC)
Power Consumption
Shown with
accessories.
GENERAL PURPOSE / INTERFACE RELAYS
G-Series
Wiring Diagrams
I1-Series
Coil voltage: 12; 24VDC
Shown with
accessories.
Contact Specifications
Contact Configurations
Rated Current
Rated Voltage
Rated Load
Min Switching Current
Contact Material
Coil Specifications
Rated Voltage (DC)
Rated Voltage (AC)
Power Consumption
General Data
Mechanical Life Cycles
Electrical Life Cycles
Operate/Release Time (ms)
Insulation Between Coil & Contacts
Insulation Between Open Contact
Ambient Temperature Range
Dimensions
All dimensions are in millimeters.
To convert to inches, divide by 25.4.
DPDT; 3PDT
10A
250VAC
10A @ 250VAC; 10A @ 24VDC
300mW
AgNi
Coil voltage: 24VAC/DC
Coil voltage: 110; 230VAC/DC
12, 24, 48, 110, 120
12, 24, 48, 110, 230
1.5W (DC)
2.5VA @ 50Hz
2.8VA @ 60Hz
2 x 107
2 x 105
12(AC) 18(DC) / 12(AC) 7(DC)
2.5kV
1.5kV
-40 to 70°C
DPDT
4PDT
Ordering Codes
G-Series
M-Series
G
08 = 2 pole
11 = 3 pole
G-Series
– = Standard
L = +LED
Coil Codes
D012 = 12VDC
D024 = 24VDC
D048 = 48VDC
D110 = 110VDC
D125 = 125VDC
A012
A024
A048
A110
A230
=
=
=
=
=
6
5
12VAC
24VAC
48VAC
110VAC
230VAC
7
4
8
3
Other coil voltages on request.
9
2
1
DPDT
11
10
3PDT
L-Series
Accessories
Socket
Retaining Clip
Diode Module
Jumper Links, 20 pole (red, black, blue)
35 mm
13
54.5 mm
8p: VG-8T; 11p: VG-11T
CG-1
–
–
1
2
3
4
5
6
7
* 24VAC/DC, 110VAC/DC,
8
DPDT
230VAC/DC combination also available
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
29
PLUGGABLE SLIMLINE RELAYS
RS Series Relay Modules
At only 6.2mm thickness the RS series Relay module features a slim Din
Rail mountable interface solution. The modules have a plug in
construction and are available with or without the relay. The built in
LED indicates the relay energizing state. The relay features a SPDT
configuration and a maximum switching current of 6A. It is available
with several standard coil voltages from 5VAC/DC up to 230V
AC/DC.
Jumpers can be cut to required sizes.
There is a provision for fitting pluggable jumpers which reduces the
wiring time. The modules have screw terminals with finger protection
for wire termination and offer an IP 20 protection rating. The relay has
an IP67 protection rating. Both the relay and the module are UL
recognized.
Part Number
RSM-05CU
RSM-06CU
RSM-12CU
RSM-24CU
RSM-110CU
RSM-220CU
RSJ-RD
RSJ-BK
RSJ-BL
RSP-1
RST-1
Type number
41F-1Z-C2-5 + HF41F/5-Z-S
41F-1Z-C2-5 + HF41F/6-Z-S
41F-1Z-C2-1 + HF41F/12-Z-S
41F-1Z-C2-1 + HF41F/24-Z-S
41F-1Z-C2-3 + HF41F/60-Z-S
41F-1Z-C2-4 + HF41F/60-Z-S
HF41F-AAJ-001-RD
HF41F-AAJ-001-BK
HF41F-AAJ-001-BL
HF41F-AAS-001
HF41F-AAT-001
RS Series Socket
CHARACTERISTICS
Ambient Temperature:
Rated Voltage:
Rated Current:
Insulation Voltage (Min.):
Protection:
Socket Material:
Contacts Spring Material:
Terminal Torque:
Wire Strip Length:
Applicable Relay Type:
Part Number
RSS-624U
RSS-624D
RSS-4860U
RSS-110U
RSS-220U
Type number
41F-1Z-C2-1-555
41F-1Z-C2-5-555
41F-1Z-C2-2-555
41F-1Z-C2-3-555
41F-1Z-C2-4-555
Dimensions (mm)
(to convert to inches
multiply by 0.03937)
30
shown on DIN rail with
relays and jumpers
Partition Plate, RSP-1
Marking Tags, RST-1
Description
6A@250VAC/30VDC,5VDC Coil, 6.2 mm, LED, SPDT
6A@250VAC/30VDC,6VDC Coil, 6.2 mm, LED, SPDT
6A@250VAC/30VDC,12VAC/DC Coil, 6.2 mm, LED, SPDT
6A@250VAC/30VDC,24VAC/DC Coil, 6.2 mm, LED, SPDT
6A@250VAC/30VDC,110VAC/DC Coil, 6.2mm, LED, SPDT
6A@250VAC/30VDC,220VAC/DC Coil, 6.2mm, LED, SPDT
Jumper for RSM, Red, 36A, 250V, 20 pole
Jumper for RSM, Black, 36A, 250V, 20 pole
Jumper for RSM, Blue, 36A, 250V, 20 pole
Partition plate for RMS 2.2mm wide
Marking Tag strip for RSM, white, (16 tags per strip)
Std. Pk.
10
10
10
10
10
10
10
10
10
10
4
-40°C to +70°C
(-40°F to +158°F)
250VAC
6A (per pole)
5000VAC
IP20
PA66+GF V0 (UL)
QSn6.5-0.1
0.6Nm (5.3 lb. in.)
7mm
RSR Series (41F)
Description
For 12 to 24VAC/DC relays, IP20, LED
For 5 to 24VDC relays, IP20, LED
For 48 to 60VAC/DC relays, IP20, LED
For 110 to 125 VAC/DC relays, IP20, LED
For 220 to 240 VAC/DC relays, IP20, LED
Notes: Module features/ functions:
(1) LED indicates the coil energizing state.
(2) Eliminates negative current of relays.
(3) Rectifying function (only for VAC/DC types).
6.2
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
PLUGGABLE SLIMLINE RELAYS
RS Series Subminiature Power Relay
FEATURES
•
•
•
•
•
•
•
•
Slim size (width 5mm)
High breakdown voltage 4kV (between coil and contacts)
Surge voltage up to 6kV (between coil and contacts)
Clearance/creepage distance: 8mm
Coil power consumption: 170mW
Contact configuration: SPDT (Form C)
Environmental friendly product (RoHS compliant)
Outlne Dimensions: 28.0 x 5.0 x 15.0mm
CONTACT INFORMATION
SPDT
100mΩ (at 1A/6VDC)
Gold plated: 30mΩ (at 1A/6VDC)
Resistive Load
Pilot Duty
AgNi
6A/250VAC
6A/30VDC
R300
400VAC / 125VDC
6A resistive
1500VA / 180W
File No.:40020043
Part Number
RSR-05DCS
RSR-06DCS
RSR-12DCS
RSR-24DCS
RSR-48DCS
RSR-60DCS
Type number
HF41F/5-Z-S-210
HF41F/6-Z-S-210
HF41F/12-Z-S-210
HF41F/24-Z-S-210
HF41F/48-Z-S-210
HF41F/60-Z-S-210
Description
SPDT, 5 mm, 5VDC Coil, IP67
SPDT, 5 mm, 6VDC Coil, IP67
SPDT, 5 mm, 12VDC Coil, IP67
SPDT, 5 mm, 24VDC Coil, IP67
SPDT, 5 mm, 48VDC Coil, IP67
SPDT, 5 mm, 60VDC Coil, IP67
Contact Configuration
1 Form SPDT
10 million cycles
10,000 cycles at 85°C (185°F)
CHARACTERISTICS
1000mΩ (at 500VDC)
4000VAC 1 min.
Dimensions (mm)
(to convert to inches
multiply by 0.03937)
1000VAC 1 min.
Max. 8ms
Max. 4ms
50m/s2 (5g)
1000m/s2 (100g)
1mm double amplitude max
@10 ...55 Hz, 6G max
5 to 85% RH
Wiring Diagram
PCB Layout
-40°C to +85°C (-40°F to +185°F)
Plug in; PCB mount
5.4g (0.2 oz.)
Sealed IP67. Flux proof
COIL
Coil power
consumption:
COIL DATA
5 to 24VDC: 170mW
48VDC, 60VDC: 210mW
at 20°C
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
31
CARRIER MODULES
TS35x7.5 37mm (1.46 in.)†
TS32x15 42mm (1.65 in.)†
Mount standard opto coupler input/output
(I/O) modules in a high density arrangement
for logic output to field devices, or for input
of field data to the controller. I/O modules
optically isolate ICs and PLCs from
damaging field voltage spikes and line
noise, while controlling up to 3 Amp field
current with less than 20mA logic current.
Altech I/O Module Carriers can accept up to
16 industry standard 0.6 in. (15.24mm) I/O
modules in any combination: Input, Output,
AC or DC from most manufacturers.
L
L
m .)
m in
87 .43
(3
Screw-Cage Clamp Connection
Integral Sockets, Retaining Nut
Field Voltage Rating: 280V AC/DCa
LED Indication, Fuse Protection
DIN Rail Mount, Panel Mount Available
Low current LED with dropping resistor for high resistance
pull-up and low logic sink/source current requirements.
LED
Logic status LED which uses the I/O module impedance
as its dropping resistor.
Wire Range
Fuse Rating
0.5-4mm2
Wire Range
Fuse Rating
0.5-4mm2
22-12AWG
5A/125V ACb
22-12AWG
5A/125V ACc
Custom designs can be accommodated!
Ordering Information
TS35x7.5 37mm (1.46 in.)†
TS32x15 42mm (1.65 in.)†
m )
m in.
87 .43
(3
•
•
•
•
•
I/O B
Bussed
I/O I
Isolated
INTERFACES
I/O Opto Carrier
35 or 32mm DIN Rail
Type
Cat. No.
Length (L)
mm (in.)
Type
Cat. No.
Length (L)
mm (in.)
I/O Opto Carrier,
Isolated Positions
1 Position, Logic Voltage
5V DC
15V DC
24V DC
Green
Yellow
Red
I/O I-1B
I/O I-1E
I/O I-1G
8954.0/B
8954.0/E
8954.0/G
34.5 (1.36)
34.5 (1.36)
34.5 (1.36)
2 Position, Logic Voltage
5V DC
15V DC
24V DC
Green
Yellow
Red
I/O I-2B
I/O I-2E
I/O I-2G
8955.0/B
8955.0/E
8955.0/G
57.8 (2.28)
57.8 (2.28)
57.8 (2.28)
4 Position, Logic Voltage
5V DC
15V DC
24V DC
Green
Yellow
Red
I/O I-4B
I/O I-4E
I/O I-4G
8956.0/B
8956.0/E
8956.0/G
114 (4.49)
114 (4.49)
114 (4.49)
8 Position, Logic Voltage
5V DC
12V DC
24V DC
Green
Yellow
Red
I/O I-8B
I/O I-8E
I/O I-8G
8957.0/B
8957.0/E
8957.0/G
226 (8.90)
226 (8.90)
226 (8.90)
I/O Opto Carrier
Bussed Positions
4 Position, Logic Voltage
5 to 24V DC
Green
I/O B-4
8956.0
114 (4.49)
8 Position, Logic Voltage
5 to 24V DC
Green
I/O B-8
8959.0
183 (7.20)
16 Position, Logic Voltage
5 to 24V DC
Green
I/O B-16
8861.0
363 (14.30)
a
Fuse rating limits field side rating.
- PCB Traces, Field Side :
- PCB Traces, Logic Side:
- Terminal Blocks:
32
10A/300V
1A with 6A Bus
15A/300V
Std. Pk.: 1
Std. Pk.: 1
†
†
Dimension is to top board, add height of relay
to determine clearance.
c
3A/250V fuse available, please consult Altech.
Dimension is to top board, add height of relay
to determine clearance.
b
3A/250V fuse available, please consult Altech.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
Standard Pinout
Standard Pinout
The I/O Module pin utilization information listed below is
intended for use only as a guide. For specific applications,
please use only the module manufacturer’s published
specifications.
Pins 1 & 2: Field Connections
- AC Output to field load, inductive up to 3.5A at
nominal 24V AC, 120V AC or 240V AC. AC hot to
either pin, field load on other pin.
- DC Output to field load (inductive OK with
commutating diode). Some modules polarized with
pin #1 positive (+). Standard output voltages 60V
DC (5-60), 200V DC (10-200).
- AC Input of field data to the logic, 10mA max at
nominal 24V AC (18-36), 120V AC (90-140) and
240V AC (90-280). Field signal to either pin.
I/O I Isolated Positions
- DC Input of field data to the logic, some modules dual
rated AC/DC, other nominal 5-28V DC (min. 4, max.
32), and nominal 12-48V DC (min. 10, max. 60).
Some modules polarized with pin #1 (+).
Pin 3: VCC Logic Power
- Standard modules are available in three nominal logic
voltages: 5V DC (normally min. 3 to max. 6), 15V
DC (12 to 18) and 24V DC (20 to 30).
Pin 4: Logic Signal
- Output - Logic ground (sink) on pin #4 closes output
circuit (pin #1 to pin #2 normally open, shorts with
sink on input pin #4). A few positive-logic modules
are available.
I/O B Bussed Positions
- Input - Field signal to pins #1 and #2 gives 20-25mA
sink at pin #4 (to pin #5).
Pin 5: Logic Ground
- On input modules only (no pin #5 on output
modules).
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
33
DIGITAL I/O MODULES
Solid State Relay I/O Modules
35 or 32mm DIN Rail
SSR I/O Series
Solid State I/O Modules are used to switch
both AC and DC loads as well as sensing AC
or DC control voltages for controlling the
input to a PLC. The input is isolated from the
output via an optically coupled circuit in the
device itself. Since there are no moving
parts, the device will have a virtually
unlimited life.
Altech I/O Module assemblies can be
supplied in either an isolated or bussed
configuration as shown on page 28.
Features:
• Wide range of Solid State I/O Modules
to choose from
• LED Indicators, Fuse Protection
• Input or Output Modules can be mixed
& Matched on the same board
• Custom installed I/O modules available
upon request
• Most plug-in modules are UL Recognized,
CE mark.
AC Output Solid State Relays
A
B
• Bussed or isolated
• up to 16 channels on single module
Custom designs can
be accommodated!
Individual I/O
Modules
• CSA-CA recognized
• UL recognized
• Optically isolated
• Industry standard
package and pin-out
• 4 kV isolation
Part No.
OA05
OA15
OA24
Nominal
Input
Voltage
5 VDC
15 VDC
24 VDC
Output
Off-state
Voltage
Leakage
Range
Current
24-240 VAC
5 mA
24-240 VAC
5 mA
24-240 VAC
5 mA
Max.
Max
Output
Turn On
Turn Off
Current
Time
Time
8.3 ms (60 Hz) 8.3 ms (60 Hz)
3A
8.3 ms (60 Hz) 8.3 ms (60 Hz)
3A
8.3 ms (60 Hz) 8.3 ms (60 Hz)
3A
DC Output Modules Solid State Relays
Part No.
OD05
OD15
OD24
Nominal
Input
Voltage
5 VDC
15 VDC
24 VDC
Control
Input
Voltage
Current
Range
Typical
2.5-6.0 VDC
10 mA
8.5-18.5 VDC 10 mA
16.5-29.0 VDC 10 mA
Output
Voltage
Range
3 - 60 VDC
3 - 60 VDC
3 - 60 VDC
Off-state
Leakage
Current
1.0 mA
1.0 mA
1.0 mA
Max.
Turn On
Time
50 µSec
50 µSec
50 µSec
Max
Turn Off
Time
100 µSec
100 µSec
100 µSec
Output
Current
3A
3A
3A
AC Input Modules Solid State Relays
C
D
Part No.
IA05
IA15
IA24
Logic
Supply
Voltage
5 VDC
15 VDC
24 VDC
Min. Turn-Off
Voltage
Operating
Frequency
40 VAC
40 VAC
40 VAC
47 - 63 Hz
47 - 63 Hz
47 - 63 Hz
Control
Voltage
Range
90 - 280 VAC
90 - 280 VAC
90 - 280 VAC
Off-Stat
Leakage
Current
10 µA
10 µA
10 µA
Max.
Turn On
Time
20 ms
20 ms
20 ms
Max.
Turn Off
Time
20 ms
20 ms
20 ms
Control
Voltage
Range
3-32 VDC
3-32 VDC
3-32 VDC
Off-Stat
Leakage
Current
10 µA
10 µA
10 µA
Max.
Turn On
Time
1.0 ms
1.0 ms
1.0 ms
Max.
Turn Off
Time
1.0 ms
1.0 ms
1.0 ms
DC Input Modules Solid State Relays
Part No.
ID05
ID15
ID24
Logic
Supply
Voltage
5 VDC
15 VDC
24 VDC
Altech offers a complete line of
individual I/O modules. For complete
specifications, refer to the listed module
part numbers shown above.
* If all plug-in modules are of the same type, then enter the 4 digits of the
specific module(s). For example, the part number of a 4 channel, bussed,
standard board with the OD05 type module would be: 8950-C-1-A-OD05.
In the case of mixed modules, please contact Altech for ordering information.
34
Control
Input
Voltage
Current
Range
Typical
2.5-6.0 VDC
10 mA
8.5-18.5 VDC 10 mA
16.5-29.0 VDC 10 mA
Min.
Turn Off
Voltage
2 VDC
2 VDC
2 VDC
Input
Resistance
2.2 K Ohm
2.2 K Ohm
2.2 K Ohm
Ordering Codes
8 9 5 0
No. of Channels
A=1 D=8
B = 2 E = 16
C=4
1 = Bussed
2 = Isolated
Specials:
A = Standard
B = 3A, 250V Fuse
I/O Module Type:
A = AC output
B = DC output
C = AC input
D = DC input
E = mixed
Specific plug-in
module(s) Part No.*
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
DC Output Module
Schematic Explanations
From Logic
Supply
3
2
4
1
To Load/ DC
Power Supply
5
4
3
2
Shown on the left are typical configurations for the I/O
Solid State Relay Modules. Each plug-in module may
vary somewhat , but the equivalent circuit is shown.
Output Modules have only 4 connections, while the input
modules have 5, with the addition of an added control
voltage on pin 3.
1
NC
DC Output Module
DC Output Solid State Modules usually only differ in their
output rating, although some output modules respond to
a different input threshold voltage. Altech offers a
3A@60 VDC output version.
AC Output Module
AC Output Module
From Logic
Supply
3
2
4
1
To Load
AC Supply
5
4
3
2
1
NC
AC/DC Iutput Module
Logic Control
Output
AC/DC Input Module
3
2
Logic Ground
(Common) 5
4
AC Input
1
5
4
3
2
1
DC Input Module
Logic Control
Output
In choosing the appropriate AC Output Module, there are
timing issues to consider as well as output voltage and
current capabilities. Moreover, there is a wide variation of
input resistance and voltages to consider. AC Output
modules are available in either random or zero cross
types. In a zero cross AC output module, the output will
not switch after the application of an input voltage until
the next zero crossing of the AC output waveform. This
prevents a large voltage transition at the output that
may generate EMI problems in other nearby sensitive
circuitry. Depending on the load, the lifetime may also be
dramatically increased. In the random output type, the
output switches as soon as an input voltage is applied.
An AC Input Module will supply a logic voltage at its
output with the application of an AC voltage at the input.
However, it also requires a separate control voltage. The
control voltage may be used to inhibit the device, hence
both the control voltage and the input voltage must both
be present at the same time (similar to a logical “and”)
in order that the module send a control signal out. Some
AC input modules have a bridge rectifier at the input
converting the input voltage to a DC voltage. This makes
it possible to use it with DC input voltage as well. The
output configuration is usually a NPN type.
DC Input Module
3
Logic Ground
(Common)
5
2
4
1
5
4
3
2
DC Input
DC Input modules are designed to sense the presence or
the absence of a DC voltage. Examples include the
contact closures from sources such as push buttons, limit
switches, proximity switches, etc. Like the AC Input
Module, a separate control voltage can be used to inhibit
the device.
1
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
35
30-960 Watts DIN Rail Power Supplies
Specifications
• Din Rail mount
• Wide Power Range (20W-960W)
• Wide Adjustment Range
• Rugged for Industrial Use
• High Efficiency
•
•
•
•
•
Short circuit Protection
Over-voltage Protection
Overload Protection
Over-temperature Protection
Lightweight and compact Design
Output
Input
• Input Voltage •
• 85-264 VAC for the single phase
• 340-550 VAC for the three phase
• Input Frequency: 47-63 Hz
• Input Current: 0.55 A to 8A
• Inrush Current: 60 A max
• Power Factor: All units EN61000-3-2 compliant
•
•
•
•
•
•
Output Voltage: 5V; 12V; 15V; 24V; 48V
Output Voltage Adjustment Range: ±10%
Initial Set Accuracy: ±2% max
Ripple & Noise: See data sheet
Over-voltage Protection: 115-135%
Overload Protection: 105-150%,
constant current with auto recovery
General
• Efficiency: 72-92% (see data sheets)
• Isolation: 3000 VAC Input to Output
1500 VAC Input to Ground
500 VAC Output to Ground
Environmental
Power supplies can run at 100% capacity
inside the panel, there is no need for
oversizing. See derating curves for more
information. (at altechcorp.com)
• Operating Temperature:
-20~ +60°C
• Operating Humidity:
90% RH, non-condensing
• Storage Temperature:
-20 °C to +85 °C
• Vibration: 2 G, 10 Hz to 500 kHz,
10 min/cycle for 60 minutes
each axis
EMC & Safety
• Emissions: EN55022/55011,
Class B
• EN61000-3-2, 3
• Voltage Flicker: EN61000-3-3
• ESD Immunity: EN61000-4-2,
level 3 air
• Radiated Immunity:
EN61000-4-3, 10 V/m
• EFT/Burst: EN61000-4-4,
level 3
• Surge: EN61000-4-5, level 3
• Conducted Immunity:
EN61000-4-6, 10 V rms,
• Safety Approvals:
EN60950, UL508,
UL60950 on 120, 240, 480 &
960 W models,
CE marked
36
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
30-960 Watts DIN Rail Power Supplies
20-100W Single Phase Slimline Power Supplies
Key Features
• Universal AC Input / Full Range
• NEC class 2 / LPS compliant (Only selected models;
see data sheet at altechcorp.com)
• LED indicator for power on
• 100% full load burn-in test
• 3 year warranty
• Input voltage range: 85-264V AC, 120-370V DC
• AC inrush current (typical):
Cold start: 20A at 115V AC, 40A at 230V DC
• DC adjustment range (typical): ±10% rated output voltage
• Overload protection (typical):
105%-160% constant current limiting, auto-recovery
• Over-voltage protection (typical):
20W Single Output
Industrial
Cat. No.
PS-S2005
PS-S2012
115%-135% rated output voltage
• Setup, rise, time (typical):
500ms, 30ms/230V AC
10000ms, 30ms/115V AC,at full load
• Withstand voltage:
I/P-O/P:3KV AC, I/P-FG:1.5KV AC, O/P-FG:0.5KV AC,
• Working temperature:
-20 to +70°C (-4° to +158°F), refer to output derating curve
• Safety standards:
UL508, EN60950-1*
• EMC standards:
EN55022 class B, EN61000-4-2,3,4,5,6,8,11,
ENV50204, EN55024, EN61000-6-1,
EN61204-3 Light Industry Level**, criteria A
* Except PS-S20xx. **Heavy for PS-S40xx and PS-S60xx
40W Single Output
Industrial
Output
V DC
A
Tol.
%
Ripple &
Noise
Efficiency
Cat. No.
5V DC
±2%
80 mVp-p
76%
PS-S4005
±1%
120 mVp-p
80%
PS-S4012
48V DC 0.83A
3A
12V DC 1.67A
PS-S2015
15V DC 1.34A
±1%
120 mVp-p
81%
PS-S4024
PS-S2024
24V DC
±1%
150 mVp-p
84%
PS-S4048
Universal Input:
1A
85-264V AC, 120-370V DC full range;
0.55A @ 115V AC; 0.35A @ 230V AC
Connection: Input - 3 poles, Output – 2 poles screw terminal
+ DC OK active signal
Size (WxHxD): 22.5x90x100mm (0.89x3.54x3.94 inches)
Packaging: 1/box; 0.48lbs / 0.19Kg
60W Single Output
Industrial
Output
V DC
A
5V DC
6A
Tol.
%
Ripple &
Noise
Efficiency
±2%
80 mVp-p
79%
12V DC 3.33A
±1%
120 mVp-p
86%
24V DC
±1%
150 mVp-p
88%
±1%
200 mVp-p
88%
1.7A
Universal Input:
85-264V AC, 120-370V DC full range;
1.1A @ 115V AC, 0.7A @ 230V AC
Connection: Input - 3 poles, Output – 4 poles screw terminal
+ DC OK relay contact
Size (WxHxD): 40x90x100mm (1.57x3.54x3.94 inches)
Packaging: 1/box; 0.66lbs / 0.3Kg
100W Single Output
Industrial
PENDING
Cat. No.
Output
V DC
A
Tol.
%
Ripple &
Noise
Efficiency
Cat. No.
Output
V DC A
Tol.
%
Ripple &
Noise
Efficiency
PS-S6005
5V DC
10A
±2%
80 mVp-p
79%
PS-S10012
12V DC 8A
±1%
PS-S6012
12V DC
5A
±1%
120 mVp-p
86%
PS-S10024
24V DC 4A
±1%
150 mVp-p
88%
PS-S6024
24V DC
2.5A
±1%
150 mVp-p
88%
PS-S10048
48V DC 2A
±1%
200 mVp-p
87%
PS-S6048
48V DC 1.25A
±1%
200 mVp-p
89%
Connection: Input - 2 poles, Output – 4 poles screw terminal
Size (WxHxD): 55x90x100mm (2.17x3.54x3.94 inches)
Packaging: 1/box; 0.73lbs / 0.33Kg
Universal Input:
85-264V AC, 120-370V DC full range;
1.8A @ 115V AC, 1A @ 230V AC
Connection: Input - 3 poles, Output – 4 poles screw terminal
+ DC OK relay contact
Size (WxHxD): 40x90x100mm (1.57x3.54x3.94 inches)
Packaging: 1/box; 0.73lbs / 0.33Kg
120 mVp-p
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
87%
37
30-960 Watts DIN Rail Power Supplies
Key Features
30-60W Single Phase Low Profile Power Supplies
•
•
•
•
•
•
•
Cooling by free air convection
Universal AC Input / Full Range
LED indicator for power on
100% full load burn-in test
3 year warranty
Input voltage range: 85-264V AC, 120-370V DC
AC inrush current (only PS-30xx):
Cold start: 15A at 115V AC, 30A at 230V DC
• DC adjustment range:*
±10% rated output voltage
• Overload protection:*
105%-160% constant current limiting, auto-recovery
• Over-voltage protection:*
115%-135% rated output voltage
30W Single Output
Class II
• Setup, rise, hold up time:*
100ms, 30ms, 60ms at full load and 230V AC
• Withstand voltage:
I/P-O/P:3KV AC, I/P-FG:1.5KV AC*
• Working temperature:
-20 to +50°C (-4° to +122°F) at 100%, and +60°C (+140°F)
at 80% load
• Safety standards:
UL60950-1, UL508*
• EMC standards:
EN55022 class B*, EN61000-4-2,3,4,5,6,8,11
ENV50204, EN61204-3
• Military Standard: MIL-HDBK-217F
*
Except PS-100xx (see data sheet at altechcorp.com)
45W Single Output
Class II
Cat. No.
Output
V DC
A
Tol.
%
Ripple &
Noise
Efficiency
Cat. No.
Output
V DC
A
Tol.
%
PS-3005
5V DC 3A
±2%
80 mVp-p
74%
PS-4505
5V DC
PS-3012 12V DC 2A
±1%
120 mVp-p
81%
PS-3015 15V DC 2A
±1%
120 mVp-p
82%
PS-4515 15V DC 2.8A ±1%
240 mVp-p
77%
PS-3024 24V DC 1.5A
±1%
150 mVp-p
83%
PS-4524 24V DC
480 mVp-p
80%
Universal Input: 85-264V AC, 120-370V DC full range;
0.88A @ 115V AC; 0.48A @ 230V AC
Connection: Input - 2 poles, Output – 4 poles screw terminal
Size (WxHxD): 78x93x56mm (3.07x3.66x2.05 inches)
Packaging: 1/box; 0.59lbs / 0.27Kg
60W Single Output
Class II
Cat. No.
Ripple &
Noise
Efficiency
±2%
100 mVp-p
72%
PS-4512 12V DC 3.5A ±1%
200 mVp-p
77%
5A
2A
±1%
Universal Input: 85-264V AC, 120-370V DC full range;
1.5A @ 115V AC, 0.75A @ 230V AC
Connection: Input - 3 poles, Output – 4 poles screw terminal
Size (WxHxD): 78x93x67mm (3.07x3.66x2.64 inches)
Packaging: 1/box; 0.69lbs / 0.31Kg
100W Single Output
Class II
Tol.
%
±2%
Ripple & Efficiency
Noise
80 mVp-p
76%
Cat. No.
PS-6005
Output
V DC
A
5V DC 6.5A
Output
V DC
A
PS-10012 12V DC 6.5A
Tol.
%
±2%
Ripple & Efficiency
Noise
120 mVp-p
87%
PS-6012
12V DC 4.5A
±1%
120 mVp-p
82%
PS-10015 15V DC 4.5A
±1%
120 mVp-p
87%
PS-6015
15V DC 4.0A
±1%
120 mVp-p
83%
PS-10024 24V DC 4.0A
±1%
120 mVp-p
89%
PS-6024
24V DC 2.5A
±1%
150 mVp-p
84%
Universal Input: 88-264V AC, 124-370V DC full range;
1.2A @ 115V AC, 0.8A @ 230V AC
Connection: Input - 2 poles, Output – 4 poles screw terminal
Size (WxHxD): 78x93x56mm (3.07x3.66x2.05 inches)
Packaging: 1/box; 0.66lbs / 0.3Kg
38
Universal Input: 88-264V AC, 124-370V DC full range;
3A @ 115V AC, 1.6A @ 230V AC
Connection: Input - 2 poles, Output – 4 poles screw terminal
Size (WxHxD): 100x93x56mm (3.93x3.66x2.05 inches)
Packaging: 1/box; 0.77lbs / 0.35Kg
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
30-960 Watts DIN Rail Power Supplies
Key Features
75-240W Single Phase Low Profile Power Supplies
• Universal AC Input / Full Range
or switch select
• LED indicator for power on
• 100% full load burn-in test
• 3 year warranty
• Input voltage range:* 85-264V AC, 120-370V DC
• AC inrush current:
Cold start: 20A at 115V AC, 40A at 230V AC
• DC adjustment range:
±10% rated output voltage
• Overload voltage protection:
105%-160% constant current limiting, auto-recovery
• Over-voltage protection:
115%-135% rated output voltage
75W Single Output
Cat. No.
Efficiency
Cat. No.
100 mVp-p
76%
PS-12012
12V DC
150 mVp-p
80%
PS-12024
24V DC
240 mVp-p
81%
PS-12048
48V DC
Tol.
%
Ripple &
Noise
PS-7512
12V DC 6.3A
±2%
PS-7524
24V DC 3.2A
±1%
PS-7548
48V DC 1.6A
±1%
85-264V AC, 120-370V DC full range,
1.6A @ 115V AC, 0.96A @ 230V AC
Connection: Input - 3 poles, Output – 4 poles screw terminal
Size (WxHxD): 55.5x125x100mm (2.20x4.95x3.95 inches)
Packaging: 1/box; 1.35lbs / 0.60Kg
Output
V DC
A
PSH-12024 24V DC
5A
PSH-12048 48V DC 2.5A
Except PSH-120xx (see data sheet at altechcorp.com)
Output
V DC
A
Tol.
%
Ripple &
Noise
Efficiency
10A
±2%
80 mVp-p
80%
5A
±1%
80 mVp-p
84%
2.5A
±1%
100 mVp-p
85%
Switch select Input: 88-132V AC / 176-264 V AC, 248-370V DC range,
2.6A @ 115V AC, 1.6A @ 230V AC
Connection: Input - 3 poles, Output – 4 poles screw terminal
Size (WxHxD): 65.5x125x100mm (2.56x4.95x3.95 inches)
Packaging: 1/box; 1.75lbs / 0.79Kg
240W Single Output
with PFC Function
120W High Input
Single Output
Cat. No.
*
120W Single Output
Output
V DC A
Universal Input:
• Setup, rise, hold up time:
500ms; 70ms; 30ms at full load and 230V AC
• Withstand voltage:
I/P-O/P:3KV AC, I/P-FG:1.5KV AC, O/P-PG: 0.5KV AC
• Working temperature:
-20 to +50°C (-4° to +122°F) at 100%,
and +60°C (+140°F) at 80% load
• Safety standards:
UL60950-1, UL508
• EMC standards:
EN55022 class B, EN61000-4-2,3,4,5,6,8,11,
ENV50204, EN61204-3
• Military Standard: MIL-HDBK-217F
Tol.
%
Ripple &
Noise
Efficiency
Cat. No.
Output
V DC A
Tol.
%
Ripple &
Noise
Efficiency
±1%
80 mVp-p
85%
PSP-24024
24V DC 10A
±1%
80 mVp-p
84%
±1%
80 mVp-p
86%
PSP-24048
48V DC 5A
±1%
150 mVp-p
85%
Switch select Input: 340-550V AC, 480-780V DC range,
0.65A @ 400V AC, 0.6A @ 500V AC
Connection: Input - 3 poles, Output – 4 poles screw terminal
Size (WxHxD): 65.5x125x100mm (2.56x4.95x3.95 inches)
Packaging: 1/box; 1.65lbs / 0.75Kg
Universal Input:
85-264V AC, 120-370V DC full range,
2.8A @ 115V AC, 1.4A @ 230V AC
Built in active Power Factor Correction function. PF>0.95
Connection: Input - 3 poles, Output – 4 poles screw terminal
Size (WxHxD): 125x125x100mm (4.95x4.95x3.95 inches)
Packaging: 1/box; 2.7lbs / 1.2Kg
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
39
30-960 Watts DIN Rail Power Supplies
Key Features
480W Single Phase Power Supplies
•
•
•
•
•
•
•
•
•
•
Universal AC Input / Full Range or switch select
LED indicator for power on
100% full load burn-in test
3 year warranty
Input voltage range: 90-264V AC, 250-370V DC
AC inrush current:
Cold start: 27A at 115V AC, 45A at 230V AC
DC adjustment range: ±10% rated output voltage
Overload voltage protection:
105%-160% constant curren tlimiting, auto-recovery
Over-voltage protection: 115%-135% rated output voltage
Setup, rise, hold up time: 1200ms; 40ms; 20ms at full load
at 115V AC and 230V AC
480W Single Output
with PFC Function
Cat. No.
Output
V DC A
• Withstand voltage:
I/P-O/P:3KV AC, I/P-FG:1.5KV AC, O/P-PG: 0.5KV AC
• Working temperature:
-20 to +50°C (-4° to +122°F) at 100%,
and +60°C (+140°F) at 80% load
• Safety standards:
UL60950-1, UL508
• EMC standards:
EN55022 class B, EN61000-4-2,3,4,5,6,8,11,
ENV50204,
EN61204-3
• Military Standard: MIL-HDBK-217F
*
Except PS-100xx (see data sheet at altechcorp.com)
480W Switch Select
Single Output
with PFC Function
Tol.
%
Ripple &
Noise
Efficiency
Cat. No.
Output
V DC A
Tol.
%
Ripple & Efficiency
Noise
PSP-48024 24V DC 20A
±1% 120 mVp-p
89%
PSP-480S24 24V DC 20A ±1%
120 mVp-p
89%
PSP-48048 48V DC 10A
±1% 120 mVp-p
89%
PSP-480S48 48V DC 10A ±1%
120 mVp-p
89%
Wide range Input: 180-264V AC only, 250-370V DC, 4A @ 230V AC
Built in passive Power Factor Correction function compliance to
EN61000-3-2, PF>0.7
Connection: Input - 3 poles, Output – 4 poles screw terminal
Size (WxHxD): 227x125x100mm (8.95x4.95x3.95 inches)
Packaging: 1/box; 5.3lbs / 2.4Kg
40
Switch select Input: 90-132V AC / 180-264 V AC, 254-370V DC range
8A @ 115V AC, 3.2A @ 230V AC
Built in passive Power Factor Correction function compliance to
EN61000-3-2, PF>0.7/230V AC only
Connection: Input - 3 poles, Output – 4 poles screw terminal
Size (WxHxD): 227x125x100mm (8.95x4.95x3.95 inches)
Packaging: 1/box; 5.8lbs / 2.6Kg
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
30-960 Watts DIN Rail Power Supplies
Key Features
240-960W Three Phase Power Supplies
•
•
•
•
•
•
•
•
Three Phase Input
LED indicator for power on
100% full load burn-in test
3 year warranty
Input voltage range: 340-550V AC, 480-760V DC
AC inrush current: Cold start: 50A
DC adjustment range: ±10% rated output voltage
Overload voltage protection:
105%-150% constant current limiting, auto-recovery
• Over-voltage protection: 115%-135% rated output voltage
• Setup, rise, hold up time:
1200ms, 40ms, 20ms @ 400V AC
800ms, 40ms, 40ms @ 500V AC
full load
240W Three Phase
Industrial
Cat. No.
Output
V DC A
PST-24024
PST-24048
Ripple &
Noise
Efficiency
24V DC 10A ±1%
80 mVp-p
89%
48V DC 5A
80 mVp-p
89%
Tol.
%
±1%
960W Three Phase
Output
V DC A
*
Except PSH-120xx (see data sheet at altechcorp.com)
480W Three Phase
Three phase input: 340-550V AC wide range, 480-780V DC
0.95A @ 400V AC, 0.75A @ 500V AC
Connection: Input - 4 poles, Output – 4 poles screw terminal
Size (WxHxD): 125x125x100mm (4.95x4.95x3.95 inches)
Packaging: 1/box; 2.9lbs / 1.2Kg
Cat. No.
• Withstand voltage:
I/P-O/P:3KV AC, I/P-FG:1.5KV AC,
O/P-PG 0.5KV AC
• Working temperature:
-20 to +70°C (-4 to +158°F) at 100%
• Safety standards:
EN60950-1, UL508
• EMC standards:
EN55022 (CISPR22), EN61000-4-2,3,4,5,6,8,11
ENV50204, EN61204-3
EN61000-6-2 (EN50082-2)
Heavy Industrial Level, criteria A
• Military Standard: MIL-HDBK-217F
Cat. No.
Output
V DC A
Tol.
%
Ripple &
Noise
Efficiency
PST-48024 24V DC 20A ±1%
80 mVp-p
89%
PST-48048 48V DC 10A ±1%
80 mVp-p
90%
Three phase input: 340-550V AC wide range, 480-780V DC
1.7A @ 400V AC, 1.3A @ 500V AC
Connection: Input - 4 poles, Output – 4 poles screw terminal
Size (WxHxD): 227x125x100mm (9.95x4.95x3.95 inches)
Packaging: 1/box; 5.5lbs / 2.5Kg
960W Three Phase
Parallel Function (1+1)
Tol.
%
Ripple &
Noise
Efficiency
PST-96024 24V DC 40A ±1%
80 mVp-p
91%
PST-960P24 24V DC 40A ±1%
80 mVp-p
91%
PST-96048 48V DC 20A ±1%
80 mVp-p
92%
PST-960P48 48V DC 20A ±1%
80 mVp-p
92%
Three phase input: 340-550V AC wide range,
2A @ 400V AC, 1.6A @ 500V AC
Connection: Input - 4 poles, Output – 6 poles screw terminal
Size (WxHxD): 276x125x100mm (10.87x4.95x3.95 inches)
Packaging: 1/box; 7.3lbs / 3.3Kg
Cat. No.
Output
V DC
A
Tol.
%
Ripple & Efficiency
Noise
Three phase input: 340-550V AC wide range,
2A @ 400V AC, 1.6A @ 500V AC
Connection: Input - 4 poles, Output – 6 poles screw terminal
Size (WxHxD): 276x125x100mm (10.87x4.95x3.95 inches)
Packaging: 1/box; 7.3lbs / 3.3Kg
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
41
30-960 Watts DIN Rail Power Supplies
Key Features
Power Supply Accessories
PS-RDN20 Key Features
• Suitable for redundant operation of 24V system
• Installed on 35 x 7.5 mm or
35 x 15 mm DIN Rail
• Relay contact signal output and LED
indicator for input failure alarm
• Cooling by free air convection
• 3 years warranty
PS-UPS40 Key Features
• Battery controller for DIN Rail UPS system
• Installed on 35 x 7.5 mm or
35 x 15 mm DIN Rail
• Parallel connection to DC BUS
• Suitable for 24V system up to 40A
• Built-in battery test function
• Battery polarity protection
• Relay contact signal output and LED
indicator for DC BUS OK, Battery Fail,
and Battery Discharge
• Cooling by free air convection
• 3 years warranty
Power Supply
Redundancy Buffer
Module
40 AMP UPS
Battery Controller
PS-RDN20 is a 20A redundancy (decoupling) module for the 24V
DC power system. Containing 2 sets of 20A Oring diodes with
excellent heat dissipation deployment. PS-RDN20 give you a new
option for safe connection of 1+1 redundant set-up. Not only
perfectly decouple power sources from each other as well as from
the load, PS-RDN20 also provides users monitoring signals for
both input channels through the built-in relays. Since thereʼs no
switching components inside the module, PS-RDN20 will not arise
additional EMI issues and should provide you a worry-free
application platform!
PS-UPS40 is a 40A max. DC UPS (battery control) module for
the 24 V DC power system. Accompany with external batteries, it
can back-up up to 40A of current to critical loads for certain period
of time depending on the capacity of batteries. With complete
monitoring signals and LED indicators for DC BUS OK, Battery
Fail, Battery Discharge and the repeated Battery Test function to
check the situation of external batteries. Users can customize
their own DC UPS system to back up critical loads and capture
the status of the whole system easily.
Cat. No.
Voltage Range
Current Range
Connection: Terminal 1 - 4 poles, Terminal 2 - 6 poles
Size (WxHxD): 55.5x125x100mm (2.19x4.95x3.95 inches)
Packaging: 1/box; 1.1lbs / 0.5Kg
PS-RDN20
21-28V DC
0-20A
Voltage Range
Current Range
PS-UPS40
21-29V (Battery)
24-29V (DC)
0 - 40A
Connection: Terminal 1 - 4 poles, Terminal 2 - 6 poles
Size (WxHxD): 55.5x125x100mm (2.19x4.95x3.95 inches)
Packaging: 1/box; 1.21lbs / 0.55Kg
DC Fail Block Diagram
Vout+
Cat. No.
+
Vin/Vout-
RELAY
B
PS-UPS40
+
RELAY
A
PSU
24V/40Amax
24V
Battery
BAT
+ -
Alarm A
-
+
Load
+
-
+
-
Vin A+
42
24V
Battery
DC
- +
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
-
+
Altech has a large variety of pluggable and fixed blocks
in US and Metric Pin Spacing that are competitively
priced and in stock for immediate delivery.
So the next time you need quality PCB terminal blocks
check out Altech!
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
43
MTGTK1
MOUNTING TRACKS
For Printed Circuit Boards
DIN Rail or Panel Mount
W
Mount standard or custom printed circuit
boards in Mounting Tracks which can be
conveniently DIN rail or panel mounted in
your control panel or cabinet. These are the
same tracks used for Altech interface modules. We now make them available to you to
house and protect your custom boards, etc.
Tracks are easily cut to size or can be
ordered precut to specific lengths. They are
easily
assembled
from
standard
components and snap onto 35mm
DIN rail or can be panel mounted.
MTGTK1
L
MOUNTING
When mounting extrusions on DIN rail,
order two or more MTGF1 DIN Rail mounting feet. These feet slide into grooves on
the extrusion. Then attach two EPDR1 DIN
Rail Mount End Sections with help of EPS
screws.
To panel mount, order two EPDP1 Panel
Mount End Sections (and EPS screws), each
with an integral mounting flange with a 6 x
8mm (.24 x .32 in.) hole slot.
If desired, tracks can be direct mounted
using double sided tape. Order two
EPDR1 End Sections (and EPS screws).
•Standard Lengths: 1m (3'-3") or 2m (6'-6")
•Track Material: PVC
•Temperature Limit:
Short Term - 80˚C (176˚F)
Continuous - 70˚C (158˚F)
•End Section, Foot Material: Polyamide
•Preassembled, Precut Lengths Available
•Tracks Accept Standard MT2 Marking Tags
74
EPDP1
EPDR1
MTGF1
Narrow Mounting Track
Extrusion and Components
Each track has two sets of printed circuit
board guides to accept two alternate board
widths.
End Sections hold printed circuit boards
securely in place and keep out foreign
objects.
MTGTK1
For PC Board Widths
73mm (2.9 in.) or 69mm (2.7 in.)
Cat. No.
Mounting Track
1 meter
2 meter
Std. Pk.
MTGTK1/1M
MTGTK1
25
25
DIN Rail Mount End Section
EPDR1
100
DIN Rail Mounting Foot
MTGF1
100
Panel Mount End Section
EPDP1
100
DIN Rail / Panel Mount End Section
Screws #4x1/2”, Phillips Pan head
(2 required per end section)
EPS
200
Marking Tags
MT2
00
DIN Rail Mounting Kit
(2x EPDR; 2x MTGF; 4x EPS)
1.100
1
Accessories
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
DIN Rail Mount
TS35x7.5 39mm (1.54 in.)
TS32x15 44mm (1.73 in.)
High PCB Guide (HG)
Panel Mount
Low PCB Guide (LG)
Printed circuit board shown in High Guide
High PCB Guide (HG)
16mm
(.630 in.)
Low PCB Guide (LG)
Printed circuit board shown in High Guide
Sizing Information
Printed Circuit Board Width
Track Type
High Guide (HG)
Low Guide (LG)
MTGTK1
73 ± 1mm (2.9 ± 0.04 in.)
69 ± 1mm (2.7 ± 0.04 in.)
Mounting Track Extrusion "Cut-to-Size" Formula
Extrusion Length = Printed Circuit Board Length – 4.5mm (.175 in.)
aAlso applies for DIN Rail Mount Unit
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
75
INTERCFACE MODULES INDEX
Part No.
Pg.
5492.2 . . . . . . . . . . . . . . . . . . . . . .14
5492.5 . . . . . . . . . . . . . . . . . . . . . .14
5494.2 . . . . . . . . . . . . . . . . . . . . . .14
5494.5 . . . . . . . . . . . . . . . . . . . . . .14
5502.2 . . . . . . . . . . . . . . . . . . . . . .14
5502.5 . . . . . . . . . . . . . . . . . . . . . .14
5506.2 . . . . . . . . . . . . . . . . . . . . . .14
5506.5 . . . . . . . . . . . . . . . . . . . . . .14
5508.2 . . . . . . . . . . . . . . . . . . . . . .14
5508.5 . . . . . . . . . . . . . . . . . . . . . .14
5514.2 . . . . . . . . . . . . . . . . . . . . . .14
5514.3 . . . . . . . . . . . . . . . . . . . . . .14
5514.5 . . . . . . . . . . . . . . . . . . . . . .14
5514.6 . . . . . . . . . . . . . . . . . . . . . .14
5700.2 . . . . . . . . . . . . . . . . . . . . . . .9
5701.2 . . . . . . . . . . . . . . . . . . . . . . .9
5702.2 . . . . . . . . . . . . . . . . . . . . . . .8
5702.3 . . . . . . . . . . . . . . . . . . . . . . .8
5703.2 . . . . . . . . . . . . . . . . . . . . . . .8
5703.3 . . . . . . . . . . . . . . . . . . . . . . .8
5704.2 . . . . . . . . . . . . . . . . . . . . . . .8
5705.2 . . . . . . . . . . . . . . . . . . . . . . .8
5706.2 . . . . . . . . . . . . . . . . . . . . . . .8
5707.2 . . . . . . . . . . . . . . . . . . . . . . .8
5712.2 . . . . . . . . . . . . . . . . . . . . . .11
5714.2 . . . . . . . . . . . . . . . . . . . . . .11
5720.2 . . . . . . . . . . . . . . . . . . . . . . .7
5721.2 . . . . . . . . . . . . . . . . . . . . . . .7
5722.2 . . . . . . . . . . . . . . . . . . . . . . .7
5723.2 . . . . . . . . . . . . . . . . . . . . . . .7
5724.2 . . . . . . . . . . . . . . . . . . . . . . .7
5725.2 . . . . . . . . . . . . . . . . . . . . . . .7
5726.2 . . . . . . . . . . . . . . . . . . . . . . .7
5727.2 . . . . . . . . . . . . . . . . . . . . . . .7
5728.2 . . . . . . . . . . . . . . . . . . . . . . .7
5729.2 . . . . . . . . . . . . . . . . . . . . . . .7
5730.2 . . . . . . . . . . . . . . . . . . . . . .11
5731.2 . . . . . . . . . . . . . . . . . . . . . .11
5732.2 . . . . . . . . . . . . . . . . . . . . . .11
5733.2 . . . . . . . . . . . . . . . . . . . . . .11
5734.2 . . . . . . . . . . . . . . . . . . . . . .11
5735.2 . . . . . . . . . . . . . . . . . . . . . .11
5736.2 . . . . . . . . . . . . . . . . . . . . . .11
5737.2 . . . . . . . . . . . . . . . . . . . . . .11
5746.2 . . . . . . . . . . . . . . . . . . . . . . .6
5747.2 . . . . . . . . . . . . . . . . . . . . . . .6
5748.2 . . . . . . . . . . . . . . . . . . . . . . .6
5749.2 . . . . . . . . . . . . . . . . . . . . . . .6
5750.2 . . . . . . . . . . . . . . . . . . . . . .11
5751.2 . . . . . . . . . . . . . . . . . . . . . .11
5752.2 . . . . . . . . . . . . . . . . . . . . . .11
5753.2 . . . . . . . . . . . . . . . . . . . . . .11
5800.2 . . . . . . . . . . . . . . . . . . . . . .16
5800.3 . . . . . . . . . . . . . . . . . . . . . .16
5801.2 . . . . . . . . . . . . . . . . . . . . . .16
5801.3 . . . . . . . . . . . . . . . . . . . . . .16
5802.2 . . . . . . . . . . . . . . . . . . . . . .16
5802.3 . . . . . . . . . . . . . . . . . . . . . .16
5803.2 . . . . . . . . . . . . . . . . . . . . . .16
5803.3 . . . . . . . . . . . . . . . . . . . . . .16
5804.2 . . . . . . . . . . . . . . . . . . . . . .16
5804.3 . . . . . . . . . . . . . . . . . . . . . .16
5805.2 . . . . . . . . . . . . . . . . . . . . . .16
5805.3 . . . . . . . . . . . . . . . . . . . . . .16
5806.2 . . . . . . . . . . . . . . . . . . . . . .16
5806.3 . . . . . . . . . . . . . . . . . . . . . .16
8804.3 . . . . . . . . . . . . . . . . . . . . . .10
8835.2 . . . . . . . . . . . . . . . . . . . . . . .9
8836.2 . . . . . . . . . . . . . . . . . . . . . . .9
8837.2 . . . . . . . . . . . . . . . . . . . . . . .9
8838.2 . . . . . . . . . . . . . . . . . . . . . . .9
8839.2 . . . . . . . . . . . . . . . . . . . . . . .9
8840.2 . . . . . . . . . . . . . . . . . . . . . . .9
8842.2 . . . . . . . . . . . . . . . . . . . . . . .8
8850.2 . . . . . . . . . . . . . . . . . . . . . . .8
8861 . . . . . . . . . . . . . . . . . . . . . . .32
46
Part No.
8905.2
8905.3
8906.2
8906.3
8907.2
8907.3
8908.2
8908.3
8909.2
8909.3
8910.2
8910.3
8911.2
8911.3
8912.2
8912.3
8912.5
8912.6
8913.3
8913.6
8914.2
8914.5
8921.2
8921.5
8923.2
8923.3
8923.5
8923.6
8924.2
8924.4
8924.5
8924.6
8925.2
8925.3
8925.5
8925.6
8926.2
8926.3
8926.5
8926.6
8927.2
8927.3
8927.5
8927.6
8928.2
8928.3
8928.5
8928.6
8929.2
8929.3
8929.5
8929.6
8931.2
8931.3
8931.5
8931.6
8932.2
8932.5
8933.2
8933.3
8933.5
8933.6
8935.2
8935.3
8935.5
8935.6
8937.2
8938.2
8939.2
8940.2
8940.3
8940.5
8940.6
8941.2
8941.3
8941.5
Pg.
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .16
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .14
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .10
. . . . . . . . . . . . . . . . . . . . . .10
. . . . . . . . . . . . . . . . . . . . . .10
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . .12
Part No.
Pg.
8941.6 . . . . . . . . . . . . . . . . . . . . . .12
8942.2 . . . . . . . . . . . . . . . . . . . . . .12
8942.3 . . . . . . . . . . . . . . . . . . . . . .12
8942.5 . . . . . . . . . . . . . . . . . . . . . .12
8942.6 . . . . . . . . . . . . . . . . . . . . . .12
8943.2 . . . . . . . . . . . . . . . . . . . . . .12
8943.3 . . . . . . . . . . . . . . . . . . . . . .12
8943.5 . . . . . . . . . . . . . . . . . . . . . .12
8943.6 . . . . . . . . . . . . . . . . . . . . . .12
8944.2 . . . . . . . . . . . . . . . . . . . . . .12
8944.5 . . . . . . . . . . . . . . . . . . . . . .12
8945.5 . . . . . . . . . . . . . . . . . . . . . .12
8946.2 . . . . . . . . . . . . . . . . . . . . . .12
8946.5 . . . . . . . . . . . . . . . . . . . . . .12
8948.2 . . . . . . . . . . . . . . . . . . . . . .12
8948.5 . . . . . . . . . . . . . . . . . . . . . .12
8949.2 . . . . . . . . . . . . . . . . . . . . . .12
8949.3 . . . . . . . . . . . . . . . . . . . . . .12
8949.6 . . . . . . . . . . . . . . . . . . . . . .12
8951.2 . . . . . . . . . . . . . . . . . . . . . .12
8951.3 . . . . . . . . . . . . . . . . . . . . . .12
8951.5 . . . . . . . . . . . . . . . . . . . . . .12
8951.6 . . . . . . . . . . . . . . . . . . . . . .12
8953.2 . . . . . . . . . . . . . . . . . . . . . .12
8953.3 . . . . . . . . . . . . . . . . . . . . . .12
8953.5 . . . . . . . . . . . . . . . . . . . . . .12
8953.6 . . . . . . . . . . . . . . . . . . . . . .12
8954.2 . . . . . . . . . . . . . . . . . . . . . .12
8954.3 . . . . . . . . . . . . . . . . . . . . . .12
8954.5 . . . . . . . . . . . . . . . . . . . . . .12
8954.6 . . . . . . . . . . . . . . . . . . . . . .12
8955.2 . . . . . . . . . . . . . . . . . . . . . .12
8955.3 . . . . . . . . . . . . . . . . . . . . . .12
8955.5 . . . . . . . . . . . . . . . . . . . . . .12
8955.6 . . . . . . . . . . . . . . . . . . . . . .12
8956 . . . . . . . . . . . . . . . . . . . . . . .32
8956.2 . . . . . . . . . . . . . . . . . . . . . .12
8956.3 . . . . . . . . . . . . . . . . . . . . . .12
8956.5 . . . . . . . . . . . . . . . . . . . . . .12
8956.6 . . . . . . . . . . . . . . . . . . . . . .12
8957.2 . . . . . . . . . . . . . . . . . . . . . .12
8957.3 . . . . . . . . . . . . . . . . . . . . . .12
8957.5 . . . . . . . . . . . . . . . . . . . . . .12
8957.6 . . . . . . . . . . . . . . . . . . . . . .12
8959 . . . . . . . . . . . . . . . . . . . . . . .32
8959.2 . . . . . . . . . . . . . . . . . . . . . .12
8959.3 . . . . . . . . . . . . . . . . . . . . . .12
8959.5 . . . . . . . . . . . . . . . . . . . . . .12
8959.6 . . . . . . . . . . . . . . . . . . . . . .12
8963.2 . . . . . . . . . . . . . . . . . . . . . .12
8963.5 . . . . . . . . . . . . . . . . . . . . . .12
8971.2 . . . . . . . . . . . . . . . . . . . . . . .8
8971.3 . . . . . . . . . . . . . . . . . . . . . . .8
8972.2 . . . . . . . . . . . . . . . . . . . . . .12
8972.5 . . . . . . . . . . . . . . . . . . . . . .12
8973.2 . . . . . . . . . . . . . . . . . . . . . . .8
8973.3 . . . . . . . . . . . . . . . . . . . . . . .8
8974.2 . . . . . . . . . . . . . . . . . . . . . . .8
8974.3 . . . . . . . . . . . . . . . . . . . . . . .8
8975.2 . . . . . . . . . . . . . . . . . . . . . . .8
8975.3 . . . . . . . . . . . . . . . . . . . . . . .8
8995.2 . . . . . . . . . . . . . . . . . . . . . .12
8995.5 . . . . . . . . . . . . . . . . . . . . . .12
8999.2 . . . . . . . . . . . . . . . . . . . . . .12
8999.5 . . . . . . . . . . . . . . . . . . . . . .12
156.0A01.1222C . . . . . . . . . . . . . .20
156.0A01.1231C . . . . . . . . . . . . . .20
156.0A01.2422C . . . . . . . . . . . . . .20
156.0A01.2431C . . . . . . . . . . . . . .20
156.0A02.1224C . . . . . . . . . . . . . .22
156.0A02.1233C . . . . . . . . . . . . . .22
156.0A02.1242C . . . . . . . . . . . . . .22
156.0A02.2433C . . . . . . . . . . . . . .22
156.0A02.2442C . . . . . . . . . . . . . .22
156.0A11.1222C . . . . . . . . . . . . . .20
156.0A11.1231C . . . . . . . . . . . . . .20
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
INTERCFACE MODULES INDEX
Part No.
Pg.
156.0A11.2422C . . . . . . . . . . . . . .20
156.0A11.2431C . . . . . . . . . . . . . .20
156.0A12.1224C . . . . . . . . . . . . . .22
156.0A12.1233C . . . . . . . . . . . . . .22
156.0A12.1242C . . . . . . . . . . . . . .22
156.0A12.2424C . . . . . . . . . . . . . .22
156.0A12.2424C . . . . . . . . . . . . . .22
156.0A12.2433C . . . . . . . . . . . . . .22
156.0A12.2442C . . . . . . . . . . . . . .22
1SIP51212 . . . . . . . . . . . . . . . . . .24
1SIP51224 . . . . . . . . . . . . . . . . . .24
1SIR37212 . . . . . . . . . . . . . . . . . .24
1SIR37224 . . . . . . . . . . . . . . . . . .24
1SIR73212 . . . . . . . . . . . . . . . . . .24
1SIR73224 . . . . . . . . . . . . . . . . . .24
1SIR82212 . . . . . . . . . . . . . . . . . .24
1SIR82224 . . . . . . . . . . . . . . . . . .24
1SIR91212 . . . . . . . . . . . . . . . . . .24
1SIR92224 . . . . . . . . . . . . . . . . . .24
256.0A01.1222C . . . . . . . . . . . . . .20
256.0A01.1231C . . . . . . . . . . . . . .20
256.0A01.2422C . . . . . . . . . . . . . .20
256.0A01.2431C . . . . . . . . . . . . . .20
256.0A02.1224C . . . . . . . . . . . . . .22
256.0A02.1233C . . . . . . . . . . . . . .22
256.0A02.1242C . . . . . . . . . . . . . .22
256.0A02.2433C . . . . . . . . . . . . . .22
256.0A02.2442C . . . . . . . . . . . . . .22
256.0A11.1222C . . . . . . . . . . . . . .20
256.0A11.1231C . . . . . . . . . . . . . .20
256.0A11.2422C . . . . . . . . . . . . . .20
256.0A11.2431C . . . . . . . . . . . . . .20
256.0A12.1224C . . . . . . . . . . . . . .22
256.0A12.1233C . . . . . . . . . . . . . .22
256.0A12.1242C . . . . . . . . . . . . . .22
256.0A12.2424C . . . . . . . . . . . . . .22
256.0A12.2424C . . . . . . . . . . . . . .22
256.0A12.2433C . . . . . . . . . . . . . .22
256.0A12.2442C . . . . . . . . . . . . . .22
456.0A01.1222C . . . . . . . . . . . . . .20
456.0A01.1231C . . . . . . . . . . . . . .20
456.0A01.2422C . . . . . . . . . . . . . .20
456.0A01.2431C . . . . . . . . . . . . . .20
456.0A02.1224C . . . . . . . . . . . . . .22
456.0A02.1233C . . . . . . . . . . . . . .22
456.0A02.1242C . . . . . . . . . . . . . .22
456.0A02.2433C . . . . . . . . . . . . . .22
456.0A02.2442C . . . . . . . . . . . . . .22
456.0A11.1222C . . . . . . . . . . . . . .20
456.0A11.1231C . . . . . . . . . . . . . .20
456.0A11.2422C . . . . . . . . . . . . . .20
456.0A11.2431C . . . . . . . . . . . . . .20
456.0A12.1224C . . . . . . . . . . . . . .22
456.0A12.1233C . . . . . . . . . . . . . .22
456.0A12.1242C . . . . . . . . . . . . . .22
456.0A12.2424C . . . . . . . . . . . . . .22
456.0A12.2424C . . . . . . . . . . . . . .22
456.0A12.2433C . . . . . . . . . . . . . .22
456.0A12.2442C . . . . . . . . . . . . . .22
8923.2C . . . . . . . . . . . . . . . . . . . .18
8923.2N . . . . . . . . . . . . . . . . . . . .18
8923.2S . . . . . . . . . . . . . . . . . . . . .18
8923.3C . . . . . . . . . . . . . . . . . . . .18
8923.3N . . . . . . . . . . . . . . . . . . . .18
8923.3S . . . . . . . . . . . . . . . . . . . . .18
8924.2C . . . . . . . . . . . . . . . . . . . .18
8924.2N . . . . . . . . . . . . . . . . . . . .18
8924.2S . . . . . . . . . . . . . . . . . . . . .18
8924.4C . . . . . . . . . . . . . . . . . . . .18
8924.4N . . . . . . . . . . . . . . . . . . . .18
8924.4S . . . . . . . . . . . . . . . . . . . . .18
8926.2C . . . . . . . . . . . . . . . . . . . .18
8926.2N . . . . . . . . . . . . . . . . . . . .18
8926.2S . . . . . . . . . . . . . . . . . . . . .18
8926.3C . . . . . . . . . . . . . . . . . . . .18
8926.3N . . . . . . . . . . . . . . . . . . . .18
Part No.
Pg.
8926.3S . . . . . . . . . . . . . . . . . . . . .18
8927.2C . . . . . . . . . . . . . . . . . . . .18
8927.2N . . . . . . . . . . . . . . . . . . . .18
8927.2S . . . . . . . . . . . . . . . . . . . . .18
8927.3C . . . . . . . . . . . . . . . . . . . .18
8927.3N . . . . . . . . . . . . . . . . . . . .18
8927.3S . . . . . . . . . . . . . . . . . . . . .18
8949.2C . . . . . . . . . . . . . . . . . . . .18
8949.2N . . . . . . . . . . . . . . . . . . . .18
8949.2S . . . . . . . . . . . . . . . . . . . . .18
8949.3C . . . . . . . . . . . . . . . . . . . .18
8949.3N . . . . . . . . . . . . . . . . . . . .18
8949.3S . . . . . . . . . . . . . . . . . . . . .18
8950 SERIES . . . . . . . . . . . . . . . .34
8951.2C . . . . . . . . . . . . . . . . . . . .18
8951.2N . . . . . . . . . . . . . . . . . . . .18
8951.2S . . . . . . . . . . . . . . . . . . . . .18
8951.3C . . . . . . . . . . . . . . . . . . . .18
8951.3N . . . . . . . . . . . . . . . . . . . .18
8951.3S . . . . . . . . . . . . . . . . . . . . .18
8954.0/B . . . . . . . . . . . . . . . . . . . .32
8954.0/E . . . . . . . . . . . . . . . . . . . .32
8954.0/G . . . . . . . . . . . . . . . . . . . .32
8955.0/B . . . . . . . . . . . . . . . . . . . .32
8955.0/E . . . . . . . . . . . . . . . . . . . .32
8955.0/G . . . . . . . . . . . . . . . . . . . .32
8955.2C . . . . . . . . . . . . . . . . . . . .18
8955.2N . . . . . . . . . . . . . . . . . . . .18
8955.2S . . . . . . . . . . . . . . . . . . . . .18
8955.3C . . . . . . . . . . . . . . . . . . . .18
8955.3N . . . . . . . . . . . . . . . . . . . .18
8955.3S . . . . . . . . . . . . . . . . . . . . .18
8956.0/B . . . . . . . . . . . . . . . . . . . .32
8956.0/E . . . . . . . . . . . . . . . . . . . .32
8956.0/G . . . . . . . . . . . . . . . . . . . .32
8956.2C . . . . . . . . . . . . . . . . . . . .18
8956.2N . . . . . . . . . . . . . . . . . . . .18
8956.2S . . . . . . . . . . . . . . . . . . . . .18
8956.3C . . . . . . . . . . . . . . . . . . . .18
8956.3N . . . . . . . . . . . . . . . . . . . .18
8956.3S . . . . . . . . . . . . . . . . . . . . .18
8957.0/B . . . . . . . . . . . . . . . . . . . .32
8957.0/E . . . . . . . . . . . . . . . . . . . .32
8957.0/G . . . . . . . . . . . . . . . . . . . .32
8963.2C . . . . . . . . . . . . . . . . . . . .18
8963.2N . . . . . . . . . . . . . . . . . . . .18
8963.2S . . . . . . . . . . . . . . . . . . . . .18
8972.2C . . . . . . . . . . . . . . . . . . . .18
8972.2N . . . . . . . . . . . . . . . . . . . .18
8972.2S . . . . . . . . . . . . . . . . . . . . .18
CL-1 . . . . . . . . . . . . . . . . . . . . . . .28
CM-1/MS35 . . . . . . . . . . . . . . . . . .28
DM-1 . . . . . . . . . . . . . . . . . . . . . . .28
EPDP1 . . . . . . . . . . . . . . . . . . . . .44
EPDR1 . . . . . . . . . . . . . . . . . . . . .44
EPS . . . . . . . . . . . . . . . . . . . . . . . .44
G08 . . . . . . . . . . . . . . . . . . . . . . . .29
G11 . . . . . . . . . . . . . . . . . . . . . . . .29
I1C-20BK . . . . . . . . . . . . . . . . . . .27
I1C-20BK . . . . . . . . . . . . . . . . . . .30
I1C-20BL . . . . . . . . . . . . . . . . . . . .27
I1C-20BL . . . . . . . . . . . . . . . . . . . .30
I1C-20RD . . . . . . . . . . . . . . . . . . .27
I1C-20RD . . . . . . . . . . . . . . . . . . .30
I1-L . . . . . . . . . . . . . . . . . . . . . . . .27
I1-OC . . . . . . . . . . . . . . . . . . . . . .27
I1-T . . . . . . . . . . . . . . . . . . . . . . . .27
L2 . . . . . . . . . . . . . . . . . . . . . . . . .28
M2 . . . . . . . . . . . . . . . . . . . . . . . . .28
M4 . . . . . . . . . . . . . . . . . . . . . . . . .28
MT2 . . . . . . . . . . . . . . . . . . . . . . . .44
MTGF1 . . . . . . . . . . . . . . . . . . . . .44
MTGTK/1M . . . . . . . . . . . . . . . . . .44
MTGTK1 . . . . . . . . . . . . . . . . . . . .44
PS-10012 . . . . . . . . . . . . . . . . . . .38
PS-10015 . . . . . . . . . . . . . . . . . . .38
Part No.
Pg.
PS-10024 . . . . . . . . . . . . . . . . . . .38
PS-12012 . . . . . . . . . . . . . . . . . . .39
PS-12024 . . . . . . . . . . . . . . . . . . .39
PS-12048 . . . . . . . . . . . . . . . . . . .39
PS-3005 . . . . . . . . . . . . . . . . . . . .38
PS-3012 . . . . . . . . . . . . . . . . . . . .38
PS-3015 . . . . . . . . . . . . . . . . . . . .38
PS-3024 . . . . . . . . . . . . . . . . . . . .38
PS-4505 . . . . . . . . . . . . . . . . . . . .38
PS-4512 . . . . . . . . . . . . . . . . . . . .38
PS-4515 . . . . . . . . . . . . . . . . . . . .38
PS-4524 . . . . . . . . . . . . . . . . . . . .38
_PS-6005 . . . . . . . . . . . . . . . . . . .38
PS-6012 . . . . . . . . . . . . . . . . . . . .38
PS-6015 . . . . . . . . . . . . . . . . . . . .38
PS-6024 . . . . . . . . . . . . . . . . . . . .38
PS-7512 . . . . . . . . . . . . . . . . . . . .39
PS-7524 . . . . . . . . . . . . . . . . . . . .39
PS-7548 . . . . . . . . . . . . . . . . . . . .39
PSH-12024 . . . . . . . . . . . . . . . . . .39
PSH-12048 . . . . . . . . . . . . . . . . . .39
PSP-24024 . . . . . . . . . . . . . . . . . .39
PSP-24048 . . . . . . . . . . . . . . . . . .39
PSP-48024 . . . . . . . . . . . . . . . . . .40
PSP-48048 . . . . . . . . . . . . . . . . . .40
PSP-480S24 . . . . . . . . . . . . . . . . .40
PSP-480S48 . . . . . . . . . . . . . . . . .40
PS-RDN20 . . . . . . . . . . . . . . . . . .42
_PS-S10012 . . . . . . . . . . . . . . . . .37
PS-S10024 . . . . . . . . . . . . . . . . . .37
PS-S10048 . . . . . . . . . . . . . . . . . .37
PS-S2005 . . . . . . . . . . . . . . . . . . .37
PS-S2012 . . . . . . . . . . . . . . . . . . .37
PS-S2015 . . . . . . . . . . . . . . . . . . .37
PS-S2024 . . . . . . . . . . . . . . . . . . .37
_PS-S4005 . . . . . . . . . . . . . . . . . .37
PS-S4012 . . . . . . . . . . . . . . . . . . .37
PS-S4024 . . . . . . . . . . . . . . . . . . .37
PS-S4048 . . . . . . . . . . . . . . . . . . .37
_PS-S6005 . . . . . . . . . . . . . . . . . .37
PS-S6012 . . . . . . . . . . . . . . . . . . .37
PS-S6024 . . . . . . . . . . . . . . . . . . .37
PS-S6048 . . . . . . . . . . . . . . . . . . .37
PST-24024 . . . . . . . . . . . . . . . . . .41
PST-24048 . . . . . . . . . . . . . . . . . .41
PST-48024 . . . . . . . . . . . . . . . . . .41
PST-48048 . . . . . . . . . . . . . . . . . .41
PST-96024 . . . . . . . . . . . . . . . . . .41
PST-96048 . . . . . . . . . . . . . . . . . .41
PST-960P24 . . . . . . . . . . . . . . . . .41
PST-960P48 . . . . . . . . . . . . . . . . .41
PS-UPS40 . . . . . . . . . . . . . . . . . . .42
RSM-110CU . . . . . . . . . . . . . . . . .30
RSM-12CU . . . . . . . . . . . . . . . . . .30
RSM-220CU . . . . . . . . . . . . . . . . .30
RSM-24CU . . . . . . . . . . . . . . . . . .30
RSR-05DCS . . . . . . . . . . . . . . . . .31
RSR-06DCS . . . . . . . . . . . . . . . . .31
RSR-12DCS . . . . . . . . . . . . . . . . .31
RSR-24DCS . . . . . . . . . . . . . . . . .31
RSR-48DCS . . . . . . . . . . . . . . . . .31
RSR-60DCS . . . . . . . . . . . . . . . . .31
RSS-110U . . . . . . . . . . . . . . . . . . .30
RSS-220U . . . . . . . . . . . . . . . . . . .30
RSS-4860U . . . . . . . . . . . . . . . . . .30
RSS-624D . . . . . . . . . . . . . . . . . . .30
RSS-624U . . . . . . . . . . . . . . . . . . .30
VG-11T . . . . . . . . . . . . . . . . . . . . .29
VG-8T . . . . . . . . . . . . . . . . . . . . . .29
VL-2 . . . . . . . . . . . . . . . . . . . . . . .28
VM-4T . . . . . . . . . . . . . . . . . . . . . .28
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
47
Commonly used metric and other useful conversions
Length
inch [in.]
millimeters [mm]
meters [m]
miles [mi]
kilometers [km]
x25.4
x0.03937
x3.281
x1.609
x0.6214
=millimeters
=inches
=feet
=kilometers
=miles
Power
kilowatt [kW]
hp
x1.341
x0.7457
=hp
=kW
Torque
Newtonmeter [Nm]
lb-ft
lb-in
oz-in
x0.738
x1.356
x0.113
x0.0071
Moment of Inertia
(WR2)
lb-ft2
kilogrammeter2
[kgm2 ]
x0.042
23.720
Weight Mass and Force
Newton [N]
x0.02248
kilogram [kg]
x2.205
pound [lb]
x4.448
pound [lb]
x0.4536
°C
°F
°C
5.0
6.8
8.6
10.4
12.2
10
11
12
13
14
23.0
24.8
26.6
28.4
30.2
20
21
22
23
24
-20
-19
-18
-17
-16
-4.0
-2.2
-0.4
+1.4
3.2
-35
-34
-33
-32
-31
-31.0
29.2
-27.4
-25.6
-23.8
-10
-9
-8
-7
-6
14.0
15.8
17.6
19.4
21.2
-30
-29
-28
-27
-26
-25
-24
-23
-22
-21
-22.0
-22.0
-18.4
-16.6
-14.8
-13.0
-11.2
-9.4
-7.6
-5.8
-15
-14
-13
-12
-11
-5
-4
-3
-2
-1
0
1
2
3
4
=pounds
=pounds
=N
=kg
°C
-112.0
-94.0
-65.0
-58
-49.1
-40.0
-38.2
-36.4
-34.6
32.8
=kgm2
=lb-ft2
°F
-80
-70
-60
-50
-45
-40
-39
-38
-37
-36
=lb-ft
=Nm
=Nm
=Nm
32.0
33.8
35.6
37.4
39.2
°C
50.0
51.8
53.6
55.4
57.2
35
36
37
38
39
95.0
96.8
98.6
100.4
102.2
45
46
47
48
49
113.0
114.8
116.8
118.4
120.2
41.0
42.8
44.6
46.4
48.2
15
16
17
18
19
59.0
60.8
62.6
64.4
66.2
Conversion Formula °F = 9/5°C + 32°
48
°F
5
6
7
8
9
25
26
27
28
29
DEGREES CELCIUS VERSUS DEGREES FAHRENHEIT
68.0
69.8
71.6
73.4
75.2
77.0
78.8
80.6
82.4
84.2
30
31
32
33
34
40
41
42
43
44
50
51
52
53
54
°F
°C
°F
°C
°F
°C
°F
C
°F
°C
°F
86.0
87.8
89.6
91.4
93.2
55
56
57
58
59
131.0
132.8
134.6
136.4
138.2
80
81
82
83
84
176.0
177.8
179.6
181.4
183.2
105
106
107
108
109
221.0
222.8
224.6
226.4
228.2
130
131
132
133
134
266.0
267.8
269.6
271.4
273.2
200
210
220
230
240
392
410
428
446
464
104.0
105.8
107.6
109.4
111.2
65
66
67
68
69
149.0
150.8
152.6
154.4
156.2
90
91
92
93
94
194.0
195.8
197.6
199.4
201.2
115
116
117
118
119
239.0
240.8
242.6
244.4
246.2
140
141
142
143
144
284.0
285.8
287.6
289.4
291.2
600
700
800
900
1000
1112
1292
1472
1652
1832
1600
1700
1800
1900
2000
2912
3092
3272
3452
3632
122.0
123.8
125.6
127.4
129.2
60
61
62
63
64
70
71
72
73
74
75
76
77
78
79
140.0
141.8
143.6
145.4
147.2
158.0
159.8
161.6
163.4
165.2
167.0
168.8
170.6
172.4
174.2
85
86
87
88
89
95
96
97
98
99
100
101
102
103
104
185.0
186.8
188.6
189.4
192.2
203.0
204.8
206.6
208.4
210.2
212.0
213.8
215.6
217.4
219.2
110
111
112
113
114
120
121
122
123
124
125
126
127
128
129
230.0
231.8
233.6
235.4
237.2
248.0
249.8
251.6
253.4
255.2
257.0
258.8
260.6
262.4
264.2
135
136
137
138
139
145
146
147
148
149
150
160
170
180
190
275.0
276.8
278.6
280.4
282.2
293.0
294.8
296.6
298.4
300.2
302.0
320.0
338.0
356.0
374.0
250
300
350
400
500
1100
1200
1300
1400
1500
°C = 5/9(°F-32°)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
482
572
662
752
932
2012
2192
2372
2552
2732
Custom Assemblies Available
•
•
•
•
•
Most competitive in industry
Made to your specifications
Large inventory of components
Variety of colors available
Shipped in 2-3 weeks
• DIN Rail Terminal Block
Assemblies
• Push Button Control Stations
• Relay Assemblies
• Custom Interface Assemblies
• Enclosure Customizaion
• Imprinting
• Foot Switch Customization
• New Product Development
• Other Value Added Services.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
49