Feed-Through Double Level Altech double level terminals are the answer to high wiring density problems posed by certain unavoidable wiring arrangements. Double level terminals have the following advantages: • Double wiring density available without extension of mounting rails. • Interconnection/shorting can be done at both levels. • Marking/identification by marking tags possible at both levels. CDL4UN(I.S) internally shorted double level terminals are useful for distribution applications by using shorting links at lower levels. NEW NEW Terminal Width 6 mm 6 mm Height x Length 54 x 55.5 mm 54 x 55.5 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 4 screw clamps & 2 tapped holes for cross connection 4 screw clamps & 1 tapped hole for cross connection Approvals 60947-7-1 E220514 22-10 AWG 0.2-4 sq.mm 22-10 AWG 22-10 AWG 0.2-4 sq.mm 22-10 AWG Voltage Rating 600V 800 V 600 V 600 V 800 V 600 V Current Rating 35 A 32 A 35 A 35 A 32 A 35 A 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Wire Range Now uses larger MT6 tag for easier visibility. CDL4UN(I.S) CDL4UN Torque 60947-7-1 E220514 Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CDL4UN 100 CDL4UN(I.S) 100 End Plate EPCDL4UN 50 EPCDL4UN 50 Separator Plate SPCDL4U 100 SPCDL4U 100 CA702 CA802 50 50 CA702 CA802 50 50 DIN Rail for ordering information refer to pages 90-91 End Stop for ordering information refer to page 92 COLOR BLOCKS (other than standard grey) When ordering please add color suffix to Cat. No. Example for color Red: Cat.No./R Color Red Yellow Blue Green Ordering Suffix R Y BU G Consult Altech for availability: Orange O Beige BG Dark Brown DB Black BL White W Internal Jumper 2 pole 3 pole 4 pole 10 pole CA722/2 CA722/3 CA722/4 CA722/10 100 50 50 10 CA722/2 CA722/3 CA722/4 CA722/10 100 50 50 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA742/2 CA742/3 CA742/4 CA742/10 100 50 50 10 CA742/2 CA742/3 CA742/4 CA742/10 100 50 50 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA707/S/Q/01 100 CA607/S/Q 100 CA714/2 CA714/3 CA714/4 CA714/10 100 100 50 25 CA714/2 CA714/3 CA714/4 CA714/10 100 100 50 25 MT6 100 MT6 100 Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw External Jumper Marking Tags 2 pole 3 pole 4 pole 10 pole Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 13