Feed-Through CTS35UN CTS50UN CTS95U ALLEN SCREW ALLEN SCREW Terminal Width 16 mm 20.5 mm 25 mm Height x Length 58 x 52.5 mm 75.5 x 71 mm 90 x 83 mm Stripping Length 18 mm 22 mm 24 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps & 1 tapped hole for cross 2 screw clamp connections 2 screw clamp connections Approvals E220514 60947-7-1 2-12 AWG 2-12 AWG 6-2/0 AWG 16-50 sq.mm 6-2/0 AWG Voltage Rating 600 V 600 V 600V 1600 V 600 V 600V 2000 V 600 V Current Rating 130 A 130 A 150 A 150 A 150 A 230 A 192 A 230 A 25 lb-in 25 lb-in 60 lb-in 6.8 Nm 60 lb-in 160 lb-in 10 Nm 160 lb-in Wire Range Torque 60947-7-1 E220514 E220514 2-4/0 AWG 25-95 sq.mm 2-4/0 AWG Other Approvals Cat. No. Std. Pk. Terminal Block CTS35UN 50 Isolation Partition PP35UN 50 CA702 CA802 50 50 Cat. No. Std. Pk. Cat. No. Std. Pk. CTS50U 10 CTS95U 10 CA202 CA102 50 50 CA202 CA102 50 50 MT20 MT6F 100 10 MT25 MT6F 100 10 DIN Rail for ordering information refer to page 72 End Stop for ordering info. refer to page 74 Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA771/2 CA771/3 CA771/4 CA771/10 50 25 25 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA781/2 CA781/3 CA781/4 CA781/10 50 25 25 10 Current Bars CA703/10 CA704/10 CA705/10 CA770/10 100 100 100 100 Shorting Sleeve & Screw CA707/S/Q/2 100 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole 2 pole 3 pole 4 pole 10 pole External Jumper Marking Tags 10 MT16 MT6F 100 10 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com