Fuse Blocks, 1/4 x 1 and 1/4 x 11/4 in. CAFL4U(L)* CAFL4U CAFL4U(N) CAFL4U(L) is equipped with a LED for blown fuse indication. CAFL4U(N) is equipped with a neon bulb for same application. † Fuse not included. † Fuse not included. † Fuse not included. Terminal Width 9 mm 9 mm 9 mm Height x Length 50 x 72 mm 50 x 72 mm 50 x 72 mm Stripping Length 9.5 mm 9.5 mm 9.5 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps 2 screw clamps 2 screw clamps 24V AC/DC, 48V AC/DC, 110V AC/DC, 220V AC, 300V AC 110-220V AC/DC, 300V AC Ø1/4x1 in., Ø1/4x11/4 in. Ø1/4x1 in., Ø1/4x11/4 in. LED/Neon Voltage Type of Fuse Used Ø1/4x1 in., Ø1/4x11/4 in. Approvals 60947-7-3 Wire Range E220514 60947-7-3 E220514 22-10 AWG 0.2-4 sq.mm 22-10 AWG 22-10 AWG 0.2-4 sq.mm 22-10 AWG 60947-7-3 E220514 22-10 AWG 0.2-4 sq.mm 22-10 AWG Voltage Rating 600 V 1000 V 600 V 600 V 1000 V 600 V 600 V 1000 V 600 V Current Rating 16 A 6.3 A 16 A 16 A 6.3 A 16 A 16 A 6.3 A 16 A 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Torque Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CAFL4U 25 CAFL4U(L)* 25 CAFL4U(N) 25 End Plate EPCAFL4U 50 EPCAFL4U 50 EPCAFL4U 50 End Stop for ordering information refer to page 92 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 External Jumper CA716/2 CA716/3 CA716/4 CA716/10 50 50 50 25 CA716/2 CA716/3 CA716/4 CA716/10 100 50 50 20 CA716/2 CA716/3 CA716/4 CA716/10 100 50 50 20 MT9 100 MT9 100 MT9 100 DIN Rail for ordering information refer to pages 90-91 Marking Tags 2 pole 3 pole 4 pole 10 pole 27KΩ 1N4007 LED Circuit for offline indication in CAFL4UL24V Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 23