In-Rail Bus System The In-Rail Bus System is an extremely flexible bus system suitable for data transmission and power supply. The principle is a printed circuit board with 5 bus lines that is installed into a DIN rail. This bus system can carry 5A per trace with a voltage of up to 63V. Spring contact blocks can be installed in almost any DIN enclosure for connection to the bus system. Contact security is ensured due to the high spring force of the gold plated, double contact springs. Features: • Universal Bus system useable with most DIN enclosure types* • 5 Bus lines per Bus PCB • 5A per bus, 25A max per PCB rail • Quick and easy mounting in the DIN rail • Gold plated contact surfaces • Contact block springs with double contacts • High spring force on the contact springs • Max temperature 70°C • Can be used for internal busing • Standard DIN profiles, 7.5mm and 15mm • UL approval • 250 mm piece components can be supplied in lengths up to 1 meter BUS PCB Safety Cap – Right or Safety Cap – Left Carrier-rail Cover TS35x7.5mm DIN Rail, slotted TS35x15mm DIN Rail, slotted Carrier Profile for 7.5mm DIN Rail Carrier Profile for 15mm DIN Rail Ordering Information Part Number Description 91.905/250mm 91.915/250mm 91.925/250mm 91.935/250mm 91.945 91.946 91.955 2511120/1M CA701-15/S Carrier Profile for 7.5mm DIN Rail, 250 mm length Carrier Profile for 15mm DIN Rail, 250 mm length BUS PCB, 250 mm length Carrier-rail Cover, 250 mm length Safety Cap – Right Safety Cap – Left Spring Contact Block TS35x7.5mm DIN Rail, slotted, 1 meter length TS35x15mm DIN Rail, slotted, 1 meter length Spring Contact Block * Hole must be milled in enclosure base to accept spring contact block. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 96