Model BD0810J50150AHF

Model BD0810J50150AHF
Rev A
Ultra Low Profile 0805 Balun
50Ω to 150Ω Balanced
Description
The BD0810J50150AHF is a low profile sub-miniature balanced to
unbalanced transformer designed for differential inputs and output locations on next
generation wireless chipsets in an easy to use surface mount package covering the
GSM frequency. The BD0810J50150AHF is ideal for high volume manufacturing
and is higher performance than traditional ceramic, and lumped element baluns. The
BD0810J50150AHF has an unbalanced port impedance of 50Ω and a 150Ω
balanced port impedance. This transformation enables single ended signals to be
applied to differential ports on modern semiconductors. The output ports have equal
amplitude (-3dB) with 180 degree phase differential. The BD0810J50150A00 is
available on tape and reel for pick and place high volume manufacturing.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°°C)
Features:
•
•
•
•
•
•
•
•
•
•
•
800 – 1000 MHz
0.7mm Height Profile
50 Ohm to 2 x 75 Ohm
GSM
Low Insertion Loss
Input to Output DC Isolation
Surface Mountable
Tape & Reel
Non-conductive Surface
RoHS Compliant
Halogen Free
Parameter
Min.
Frequency
Unbalanced Port Impedance
Balanced Port Impedance
Return Loss
Insertion Loss*
Amplitude Balance
Phase Balance
CMRR
Power Handling
800
13.3
Operating Temperature
Typ.
50
150
19.6
0.9
0.2
2.5
33
-55
Max
Unit
1000
2
MHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
+85
ºC
1.1
0.6
6
Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
TOP VIEW (Near Side)
SIDE VIEW
BOTTOM VIEW (Far Side)
0.68±0.07
2.04±0.10
1
4x 0.37
2
3
2x 0.15
1.29±0.10
6x 0.98
6x
0.22
6
Orientation Marker
Denotes Pin Location
Orientation Marker
Denotes Pin Location
Mechanical Outline
-Dimensions are in Millimeters
5
4
4x 0.65
6x
0.30
Pin Designation
1 Unbalanced Port
2 GND/DC Feed
+RF GND
3 Balanced Port
4 Balanced Port
5 GND
6 NC
Visit us at
www.Anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD0810J50150A0HF
Rev A
Typical Broadband Performance: 0 GHz. to 4.0 GHz.
Return Loss - Input
Amplitude Balance
0
2
-3
-6
1.5
-9
1
-12
0.5
[dB]
[dB]
-15
-18
0
-21
-0.5
-24
-27
-1
-30
-1.5
-33
4000
3500
3000
2500
2000
1500
1000
0
4000
3500
3000
2500
2000
1500
1000
500
0
500
-2
-36
Frequency [MHz]
Frequency [MHz]
Insertion Loss
Phase Balance
0
20
-5
15
10
-10
deg
[dB]
5
-15
0
-5
-20
-10
-25
-15
Frequency [MHz]
CM RR
0
-3
-6
-9
-12
-18
-21
-24
-27
-30
-33
2500
2000
1500
1000
500
-36
0
[dB]
-15
Frequency [MHz]
Visit us at
www.Anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
4000
3500
3000
2500
2000
1500
4000
4000
1000
3500
3500
500
3000
3000
2500
2000
1500
1000
500
0
Frequency [MHz]
0
-20
-30
Model BD0810J50150AHF
Rev A
Typical Performance: 700 MHz. to 1100 MHz.
Return Loss - Input
Amplitude Balance
0
2
-3
-6
1.5
-9
1
-12
0.5
[dB]
[dB]
-15
-18
-21
0
-0.5
-24
-27
-1
-30
-1.5
-33
1000
1100
1000
1100
900
700
1100
1000
900
800
700
800
-2
-36
Frequency [MHz]
Frequency [MHz]
Insertion Loss
Phase Balance
0
20
-0.3
-0.6
15
-0.9
10
-1.2
5
[dB]
[dB]
-1.5
-1.8
-2.1
0
-5
-2.4
-2.7
-10
-3
-15
-3.3
900
1100
1100
800
1000
1000
900
800
700
Frequency [MHz]
700
-20
-3.6
Frequency [MHz]
CM RR
0
-3
-6
-9
-12
-18
-21
-24
-27
-30
-33
900
800
-36
700
[dB]
-15
Frequency [MHz]
Visit us at
www.Anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD0810J50150A0HF
Rev A
Mounting Configuration:
In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be
used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet
published specifications.
All of the Xinger components are constructed from organic PTFE based composites which possess excellent
electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and
ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier.
An example of the PCB footprint used in the testing of these parts is shown below. An example of a DC-biased
footprint is also shown below. In specific designs, the transmission line widths need to be adjusted to the unique
dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances.
No Bias Footprint
Circuit Pattern
DC Bias Footprint
Dimensions are in Millimeters
Mounting Footprint
Footprint Pad (s)
Circuit Pattern
Footprint Pad (s)
Solder Resist
Dimensions are in Millimeters
Mounting Footprint
Plated thru
holes to
ground
Solder Resist
Capacitor
6x .41
4x .25
DC Bias
Plated thru holes to ground
6x .41
3x Transmission
lines
3x Transmission
lines
.04
.04
6x .33
6x .33
.66
.66
PART ORIENTATION
TOP DOWN
PART ORIENTATION
TOP DOWN
Plated thru
holes to
ground
4x .25
Visit us at
www.Anaren.com
Plated thru
holes to
ground
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD0810J50150AHF
Rev A
Packaging and Ordering Information
Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order
quantities are 4000 per reel. See Model Numbers below for further ordering information.
2.00
.81
4.00
1.75
3.50
8.00
1.60
4.00
2.41
.25
Visit us at
www.Anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282