2-Way Applications • Phased Arrays • Antenna Feed Networks • Image Reject Mixers • Test Systems • LO Power Dividers Features Electrical Specifications • Military Grade • 2-Way Power Split • In-Phase • Connectors Per MIL-C-39012 • Rugged Aluminum Housing • Low VSWR Frequency Isolation Insert. Loss VSWR GHz dB Min dB Max Max In/Out : 1 4.0 - 8.0 18 0.70 1.60/1.60 Amp. Bal. Phase Bal. Connector dB Max Degrees Max 0.40 6 Aluminum Cased Connectorized Components Model 4J0267 Power Dividers Power Ave. CW Watts SMA 10 Notes: *Input power with load VSWR of 1.20:1. Impedance: 50 ohms nominal. Meets MIL-E-5400 Class III requirements. Additional screening available for military and space applications. Electrical and Mechanical Specifications subject to change without notice. Outline Drawing NOTES: 1. MARK AS SHOWN PER MIL-STD-130 2. FINISH:EPOXY PRIMER BLUE EPOXY PAINT 3. DIMENSIONS ARE IN INCHES Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121 Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369 6.5.37