Aluminum Cased Connectorized Components Model 7A0124 Mixers Balanced, OrthoQuad ® Applications • Down Converters • Demodulators • Pulse Modulators • Current Controlled Attenuators • Phase, Frequency Discriminators Features Electrical Specifications • Military Grade • Good LO/RF Isolation Frequency GHz dB Min/Typ dB Max/Typ Max/Typ :1 • Connectors Per MIL-C-39012 0.5 - 1.0 20/25 7.5/6.5 1.6/1.2 • Low Conversion Loss • Good Intermodulation Performance • Good LO/RF VSWR Noise Fig.1 Isolation LO-RF Convers. Loss VSWR RF, LO IF Freq.2 dB Max MHz 8.5/7.5 DC-150 Note: Impedance: 50 ohms nominal. Operating temperature -54 to +95°C. LO drive of +8 dBm. All measurements are made in 50 ohm system. For biased models, conversion loss and noise figures specify @ 0 dBm LO power. Mixers have internal bias networks that allow operation over LO dynamic range ≥ 20 db while maintaining optimum conversion loss. Electrical and Mechanical Specifications subject to change without notice. Outline Drawing 1Noise figure is single sideband using a 30 MHz amplifier having a noise of 1.5 dB. 2 Upper IF frequency is the 3dB response point. NOTES: 1. CONNECTORS: SMA FEMALE PER MIL-C-39012. TYP. (3) PLACES 2. MARKING PER MIL-STD-130 3. FINISH: PRIMER, EPOXY PAINT, EPOXY BLUE 4. DIMENSIONS ARE IN INCHES 6.6.12 Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121 Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369