4 1 41.25± 0.5 Stiffener 0.3± 0.05 20.00± 0.5 7.50± 0.3 TP LAYOUT YD XR YD XR X2 (1.90) 1.00± 0.2 (1.40) Parameters: 1 Operating voltage: DC5V; 2 Operating force: 40~100g; 3 Linearity ≤1.5%；Insulation resistance＞10MΩ,(25VDC); 4 Working temperature: -20℃ ~ +70℃ 20% ~ 90%RH; 5 Storage temperature: -20℃ ~ +80℃ 20% ~ 85%RH; 6 Transmittance ＞75%; 7 Structure: Film + Glass; 8 ITO-Film: Anti glare; 9 Response time＜10ms; 10 electrode resistance: 200~900 ohms; 11 Unspecified tolerance:+/-0.3mm XL *91.00(TP AA) 92.00(TP VA) *98.90(TP OUTLINE) YU XL 7" 1024*600 YU 1.6± 0.2 Double - side tape *160.20(TP OUTLINE) 155.60(TP VA) *154.60(TP AA) Side 4.50± 0.3 Front ITO Glass Rear AZ DISPLAYS Conductor Front 0.50 0.50 P1*(4-1)=3.00± 0.2 Double -side tape Rear (1.90) ATM0700L26B-T(AZ DISPLAYS) TFT MODULE V1.0 2.2 Touch Panel Section FPC Connector is used for the module electronics interface. The recommended model is FH12-4S-1SH manufactured by Hirose. (1.40) 6 (3.00) (2.50) (2.00) (0.20) AZ DISPLAYS *90.00 LCD(AA) *91.00(TP AA) 92.00(TP VA) *98.90(TP OUTLINE) *99.40 (LCD OUTLINE) 83.40± 0.50 H=0.3 Components 80/80/80/80 7" 1024*600 0.30 *0.30 11.40 *12.00 Components 1 39 *160.60 (LCD OUTLINE) *160.20(TP OUTLINE) *155.60(TP VA) 154.60(TP AA) *153.60 LCD(AA) (0.20) (2.50) (3.00) (3.50) 40.95± 1 20.20± 1 *0.20 1.00± 0.2 *0.30± 0.05 1.90 MAX 3.50 SLA 0.50 0.50 P1*(4-1)=3.00± 0.2 *4.5Max(Total thickness) 2.65± 0.2(LCM thickness) 1.40± 0.2(TP thickness) K A ATM0700L26B-T(AZ DISPLAYS) TFT MODULE V1.0 3. Mechanical Specification 3.50 *2.65 40.95± 0.50 7