Need 200 Volt, Up to 100 AMP Schottkys for your designs? Lightweight, low profile 200 volt hermetic silicon Schottkys for Aerospace applications Series VR (V) IO (A) IFSM (A) VF (V) Package Typ. Weight (g) SED10HB200 200 10 100 0.78 @ 10A Sedpack 1 0.3 SED40KB200 150 - 200 40 500 0.95 @ 40A Sedpack 2 0.6 SED100LB200 150 - 200 100 1000 0.93 @ 100A Sedpack 3 1.0 Features / Advantages: ▪▪ Highest voltage ratings in the industry for hermetic silicon Schottkys ▪▪ Low profile (0.095") surface mount packages ▪▪ Extremely low VF, low IR, high IFSM, and low thermal resistance ▪▪ Lighter and smaller than TO-25X and stud mount packages ▪▪ No hardware or drilling required for mounting ▪▪ Eutectic die attach / no wire bonds Sedpack 1 Sedpack 2 Sedpack 3 Contact SSDI for more information & Samples: (562) 404-4474 | [email protected] | www.ssdi-power.com ISO 9001: 2008 & AS9100:2009 Rev. C | JANS Certified MFR Solid State Devices, Inc. 14701 Firestone Blvd. * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com SED10HB200, SED10HE200 and SED10HF200 10 AMP 200 VOLTS SCHOTTKY RECTIFIER Designer’s Data Sheet Part Number / Ordering Information 1/ SED10 __ 200 __ L Screening 2/ ___ = None TX = TX Level TXV = TXV Level S = S Level L Configuration HB = without lead HE = with lead HF = with lead, reverse polarity FEATURES: Low Reverse Leakage Low Forward Voltage Drop Hermetically Sealed Power Surface Mount Package Guard Ring for Overvoltage Protection Eutectic Die Attach 175oC Operating Temperature TX, TXV, and Space Level Screening Available2/ MAXIMUM RATINGS Peak Repetitive Reverse Voltage and DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA = 100oC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, 1 pulse, TA = 25oC) Operating and Storage Temperature Maximum Thermal Resistance Junction to Case SED10HB200 SED10HE200 SED10HF200 Symbol Value Units VRRM VRWM VR 200 Volts IO 10 Amps IFSM 100 Amps TOP & Tstg -55 to +175 RJC 2 (typ 1.6) 2 (typ 1.6) 5.00 Notes: 1/ For ordering information, price, operating curves, and availability – Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. C o C/W SEDPACK 1 HB Series NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. o DATA SHEET #: SH0069B HE / HF Series DOC SED10HB200, SED10HE200 and SED10HF200 Solid State Devices, Inc. 14701 Firestone Blvd. * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Symbol Maximum Typical Unit Instantaneous Forward Voltage Drop (IF =5 ADC, 300-500 sec Pulse) TA = -55oC TA = 25oC TA = 125oC VF1 VF2 VF3 0.80 0.70 0.92 0.75 0.61 VDC Instantaneous Forward Voltage Drop (IF =10 ADC, 300-500 sec Pulse) TA = -55oC TA = 25oC TA = 125oC VF4 VF5 VF6 0.85 0.75 1.00 0.78 0.68 VDC Instantaneous Forward Voltage Drop (IF =20 ADC, 300-500 sec Pulse) TA = -55oC TA = 25oC TA = 125oC VF7 VF8 VF9 0.95 - 1.24 0.85 0.76 VDC Reverse Leakage Current (Rated VR, 300 sec pulse minimum) TA = 25oC TA = 100oC TA = 125oC IR1 IR2 IR3 10 5 0.7 0.2 0.85 uA mA mA VR = 5V VR = 10V CJ1 CJ2 225 - 185 135 pF Junction Capacitance (TA = 25oC, f = 1 MHz) CASE OUTLINE: SED10HB200 CASE OUTLINE: SED10HE200 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. CASE OUTLINE: SED10HF200 DATA SHEET #: SH0069B DOC SED40KB200 and SSR40G200 SERIES Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number / Ordering Information1/ SED40 SSR40 ___ ___ ___ │ │ │ │ │ │ │ └ │ │ │ │ │ └ └ 40 AMPS 200 VOLTS POWER SCHOTTKY DIODE Screening 2/ __ = Not Screened TX = TX Level TXV = TXV Level S = S Level FEATURES: Voltage 150 = 150 V 200 = 200 V Package KB = Sedpack 2 KE = Sedpack 2 with Lead KF = Sedpack 2 with Lead, Reverse Polarity G = Cerpack Low Reverse Leakage Low Forward Voltage Drop Hermetically Sealed Surface Mount Package Guard Ring for Overvoltage Protection Eutectic Die Attach TX, TXV, and Space Level Screening Available. Contact Factory. MAXIMUM RATINGS Peak Repetitive Reverse Voltage and DC Blocking Voltage SED40__150, SSR40G150 SED40__200, SSR40G200 Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA = 100oC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25oC) Operating and Storage Temperature Maximum Thermal Resistance Junction to Case KE, KB, G KF Symbol Value Units VRRM VRWM VR 150 200 Volts IO 40 Amps IFSM 500 Amps TOP & TSTG -55 to +150 RJC 1.5 3.5 o C o C/W NOTES: 1/ For ordering information, price, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Unless otherwise specified, all electrical characteristics @25ºC. (KB) SEDPACK 2 (KE) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. (KF) CERPACK (G) DATA SHEET #: SH0064C DOC SED40KB200 and SSR40G200 SERIES Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Symbol -55 25 100 125 150 Unit Instantaneous Forward Voltage Drop typical maximum (IF = 5 Amps, 300 sec Pulse) VF 750 - 670 750 560 - 520 600 480 - mVolts Instantaneous Forward Voltage Drop typical maximum (IF = 15 Amps, 300 sec Pulse) VF 970 - 765 840 655 - 615 700 580 - mVolts Instantaneous Forward Voltage Drop typical maximum (IF = 30 Amps, 300 sec Pulse) VF 1280 - 830 900 725 - 690 750 655 - mVolts Instantaneous Forward Voltage Drop typical maximum (IF =40 Amps, 300 sec Pulse) VF 1470 - 865 950 760 - 725 810 695 - mVolts Reverse Leakage Current (Rated VR, 300 sec pulse minimum) typical maximum IR 0.1 - 0.6 10 2.5 - mA Junction Capacitance (VR =10 VDC, TA = 25oC, f = 1 MHz) typical maximum CJ - - - pF CASE OUTLINE: SED40KB200 0.0001 0.0002 0.01 - 400 500 CASE OUTLINE: SED40KE200 CASE OUTLINE: SED40KF200 CASE OUTLINE: SSR40G200 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0064C DOC SED100LB/LE/LT150 SED100LB/LE/LT200 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 100 A / 150 V and 200 V Schottky Rectifier Designer’s Data Sheet Part Number / Ordering Information 1/ FEATURES: 150 and 200 Volt Schottky Rectifier Average Output Current: 100 Amps Low Reverse Leakage Low Forward Voltage Drop Hermetically Sealed Power Surface Mount Package Guard Ring for Overvoltage Protection Eutectic Die Attach Weight: 1.1 gr (typ) TX, TXV, and Space Level Screening Available 2/. Consult Factory. SED100 __ __ __ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level TXV = TXV │ │ S = S Level │ │ │ └ Voltage 150 = 150 V │ 200 = 200 V │ └ Package LB = Sedpack 3 LE = Sedpack 3 with Lead LT = Sedpack 3 with Lead and Heatsink MAXIMUM RATINGS 3/ Peak Repetitive Reverse and DC Blocking Voltage SED100LE150 SED100LE200 Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TC = 100oC) Peak Surge Current (8.3 ms pulse, half sine wave superimposed on Io, allow Junction to reach equilibrium between pulses, TA = 25oC) Operating & Storage Temperature Maximum Thermal Resistance (Junction to Case) SEDPACK 3 (LB) SEDPACK 3 with Lead (LE) Symbol Value Units VRRM VRWM VR 150 200 Volts IO 100 Amps IFSM 1000 Amps TOP & Tstg -55 to +150 RθJC 0.3 o o C C/W SEDPACK 3 with Lead and Heatsink (LT) NOTES: 1/ For ordering information, price, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Unless otherwise specified, all electrical characteristics @25ºC. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0081B DOC SED100LB/LE/LT150 SED100LB/LE/LT200 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ Symbol Typical Max IF = 25 A IF = 50 A IF = 75 A IF = 100 A IF = 25 A IF = 50 A IF = 75 A IF = 100 A VF1 VF2 VF3 VF4 VF5 VF6 VF7 VF8 0.70 0.77 0.81 0.85 0.55 0.62 0.67 0.71 0.85 0.93 0.70 0.79 Instantaneous Forward Voltage Drop (TA=150ºC, 300 sec pulse) IF = 25 A IF = 50 A IF = 75 A IF = 100 A VF9 VF10 VF11 VF12 0.50 0.58 0.64 0.68 - VDC Instantaneous Forward Voltage Drop (TA=-55ºC, 300 sec pulse) IF = 25 A IF = 50 A IF = 75 A IF = 100 A VF9 VF10 VF11 VF12 0.78 0.95 1.10 1.26 - VDC TA = 25ºC TA = 100ºC TA = 125ºC TA = 150ºC IR1 IR2 IR3 IR4 3 1.5 6.5 30 50 20 - uA mA mA mA VR = 5V VR = 10V CJ 2250 1550 2000 pF Instantaneous Forward Voltage Drop (TA=25ºC, 300 sec pulse) Instantaneous Forward Voltage Drop (TA=125ºC, 300 sec pulse) Reverse Leakage Current (Rated VR, 300 sec pulse minimum) Junction Capacitance (f = 1MHz, TA = 25oC) NOTES: 1/ For ordering information, price, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Unless otherwise specified, all electrical characteristics @25ºC. Case Outline: SEDPACK 3 Case Outline: SEDPACK 3 with Lead NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Unit VDC VDC PIN ASSIGNMENT Package TOP BOTTOM LEAD Sedpack 3 (LB) Anode Cathode --- Sedpack 3 with Lead (LE) Anode Cathode Anode Sedpack 3 with Lead (LT) Anode Cathode Anode Case Outline: SEDPACK 3 with Lead and Heatsink DATA SHEET #: SH0081B DOC