SSR2010CTS1 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 20 AMP 100 VOLTS POSITIVE CENTERTAP SCHOTTKY RECTIFIER Designer’s Data Sheet Part Number / Ordering Information1/ SSR2010 CT S1 __ Screening2/ | L ____ = Not Screened | TX = TX Level | TXV = TXV Level | S = S Level Package L FEATURES: • PIV: 100 Volts • Low Forward Voltage Drop • Low Reverse Leakage • Hermetically Sealed Power Surface Mount Package • Guard Ring for Overvoltage Protection • Eutectic Die Attach ° • 175 C Operating Junction Temperature • TX, TXV, or Space Level Screening Available S1 = SMD1 MAXIMUM RATINGS RATING Peak Repetitive Reverse Voltage and DC Blocking Voltage SSR2010CT Average Rectified Output Current3/ (Resistive Load, 60Hz, Sine Wave, TA=25°C) Peak Surge Current3/ (8.3 ms Pulse, Half Sine Wave superimposed on IO, allow junction to reach equilibrium between pulses, TA=25°C) Operating and Storage Temperature Maximum Thermal Resistance3/ Junction to Case SYMBOL VALUE UNIT VRRM VRWM VR 100 Volts IO 20 Amps IFSM 300 Amps T OP & TSTG -65 to +175 °C RθJC 0.8 °C/W SMD1 Note: 1/ For ordering information, price, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Both legs tied together. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0067E DOC SSR2010CTS1 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS (Per Leg) CHARACTERISTICS Instantaneous Forward Voltage Drop (IF = 3 Adc, TA = 25°C, Pulse) (IF = 5 Adc, TA = 25°C, Pulse) (IF = 10 Adc, TA = 25°C, Pulse) Instantaneous Forward Voltage Drop (IF = 5 Adc, TA = -55°C, Pulse) Reverse Leakage Current (Rated VR, TA = 25°C, Pulse) Reverse Leakage Current (Rated VR, TA = 100°C, Pulse) Junction Capacitance (VR = 10 Vdc, TA = 25°C, f = 1 MHz) SYMBOL MAXIMUM UNIT VF1 VF2 VF3 0.68 0.7 0.77 Vdc VF4 0.84 Vdc IR1 100 μA IR2 5 mA CJ 400 pF Case Outline- SMD1 PIN OUT: PIN 1- ANODE 1 PIN 2- CATHODE PIN 3- ANODE 2 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0067E DOC