SED120LB100, SED120LE100, and SED120LT100 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 120 A / 100 V Schottky Rectifier Designer’s Data Sheet Part Number / Ordering Information 1/ SED120 __ __ __ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level TXV = TXV │ │ S = S Level │ │ │ └ Voltage 100 = 100 V │ │ └ Package LB = Sedpack 3 LE = Sedpack 3 with Lead LT = Sedpack 3 with Lead and Heatsink • • • • • • • • • FEATURES: 100 Volt Schottky Rectifier Average Output Current 120 Amps Low Reverse Leakage Low Forward Voltage Drop Hermetically Sealed Power Surface Mount Package Guard Ring for Overvoltage Protection Eutectic Die Attach 175°C Operating Temperature TX, TXV, and Space Level Screening Available 2/. Consult Factory. MAXIMUM RATINGS 3/ Peak Repetitive Reverse and DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TC = 100oC) Peak Surge Current (8.3 ms pulse, half sine wave superimposed on Io, allow Junction to reach equilibrium between pulses, TA = 25oC) Operating & Storage Temperature Maximum Thermal Resistance (Junction to Case) SEDPACK 3 (LB) SEDPACK 3 with Lead (LE) Symbol Value Units VRRM VRWM VR 100 Volts IO 120 Amps IFSM 1000 Amps TOP & Tstg -55 to +175 RθJC 0.3 o o C C/W SEDPACK 3 with Lead and Heatsink (LT) NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0014D DOC SED120LB100, SED120LE100, and SED120LT100 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ Symbol Maximum Value Units IF = 40 A IF = 120 A VF1 VF2 0.71 0.95 VDC TA= 125ºC, IF = 120 A VF3 0.78 VDC Reverse Leakage Current (Rated VR, TA = 25ºC, 300 μsec pulse minimum) IR1 5.0 mA Reverse Leakage Current (Rated VR, TA = 125ºC, 300 μsec pulse minimum) IR2 100 mA Junction Capacitance (VR = 5V, f = 1MHz, TA = 25oC) CJ 3200 pF Instantaneous Forward Voltage Drop (TA=25ºC, 300 μsec pulse) Instantaneous Forward Voltage Drop (300 μsec pulse) NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. Case Outline: SEDPACK 3 PIN ASSIGNMENT Package TOP BOTTOM LEAD Sedpack 3 (LB) Anode Cathode --- Sedpack 3 with Lead (LE) Anode Cathode Anode Sedpack 3 with Lead (LT) Anode Cathode Anode Case Outline: SEDPACK 3 with Lead NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Case Outline: SEDPACK 3 with Lead and Heatsink DATA SHEET #: SH0014D DOC