KF3002-GM50A Printheads Thick film thermal printhead (with thermal historical control) KF3002-GM50A GM50 series is the new product that newly added the future history control and driver LSI which has the function of thermal historical control, to GL50 series which is employing the convertional thick-film fast response thermal element. !Applications High speed label printer High speed bar code printer High speed ticket printer Various high speed terminal printers !Features 1) Newly developed thick-film fast response thermal element and driver LSI with the function of thermal history control which is added the future history control are employed for this series. It is possible to print with super high speed of 10 inches / s or 250mm / s. 2) 150km life realized by attributing durable new protection film. 3) New partial glaze construction makes it compatible with the thermal transfer application. 4) Market-proven G-series printhead construction ensures high reliability. !External dimensions (Units : mm) LABEL (5) (5.396) 54.208 (Effective Print Width) Dot #640 3-M3 (Effective Depth 3) 6.1±0.4 65 φ3H10 Length 4 (Effective Depth 3) Dot #1 DOT #640 55.5±0.3 55±0.3 (20.8) 25±0.5 28±0.3 56±0.3 φ3H10 (Effective Depth 3) #2 #1 CONNECTOR A #20 #4 #1 #19 CONNECTOR B 15.3±0.3 7.3±0.3 Max.12 Max.5.5 17.8±0.2 φ2 0 (3) Max.36 Max.45 0.896±0.2 KF3002-GM50A Printheads !Equivalent circuit DOT #640 VH (COM) DOT #1 220µF 35V GND 0.1µF 50V VDD (+5) / STB2 / STB1 / RESET LATCH REGISTER CLK (CP) DI DO / LOAD START TO EACH IC INC SEL2 SEL1 TM THERMISTER 30kΩ B: 3950 TM DI, STB DIVISION DOT No. CORRESPONDENCE DI No. DOT No. / STB No. DOT No. DI 640 ∼ 1 / STB2 640 ∼ 257 / STB1 256 ∼ 1 !Pin assignments CONNECTOR A CONNECTOR B No. Circuit No. Circuit No. Circuit 1 VDD 11 / RESET 1 VH (COM) 2 VDD 12 START 2 VH (COM) 3 SEL2 13 DO 3 GND 4 SEL1 14 NC 4 GND 5 CLK (CP) 15 TM 6 NC 16 TM 7 DI 17 / STB2 8 NC 18 / STB1 9 INC 19 NC 10 / LOAD 20 NC KF3002-GM50A Printheads !Characteristics Parameter Symbol Typical Unit − 54.208 mm Dot pitch − 0.0847 mm Total dot number − 640 dots Ω Effective printing width Rave 1250 Applied voltage VH 24 V Applied power PO 0.434 W/dot Average resistance value Print cycle SLT 0.41 ms Pulse width TON 0.263 ms Maximum number of dots energized simultaneously − 640 dots Maximum clock frequency − 8 MHz Maximum roller diameter − φ20.0 mm Running life / pulse life − 150/(1×108) km/pulses Operating temperature − 5~45 °C !Data sheets 1.6 SUPPLY ENERGY (Max.) (mJ/dot) 1.4 OPTICAL DENSITY 0.7 SLT : 0.82ms/line 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 Level1 0.6 Level2 0.5 Level3 0.4 Level4 0.3 Level5 0.2 Level6 0.1 0.0 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 ENERGY (mJ/dot) SCANNING LINE TIME (ms) Fig.2 Representative density curve Fig.3 Maximum energy curve 1.1 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0