ds XML2 EZW

Cree® XLamp® XM-L2 EasyWhite® LEDs
Product Description
FEATURES
Table of Contents
The
• Available in 4-step and 2-step
Characteristics...............................................2
XLamp®
XM-L2
EasyWhite®
LED eliminates chromaticity binning
EasyWhite bins at 2700 K, 3000 K,
Flux Characteristics, Standard Order
and
3500 K, 4000 K, 5000 K CCT, ANSI
Codes and Bins, 6-V XM‑L2 EZW..................3
white bins at 5700 K, 6500 K
Flux Characteristics, ANSI Order Codes
enables
luminaire
and
bulb
manufacturers to deliver the consistent
color and high efficacy light output of
a multi‑die LED in the compact XM-L
footprint.
XLamp
XM-L2
• Wide range of operating current – up
to 2 A @ 6 V or 1 A @ 12 V
and Bins, 6-V XM‑L2 EZW..............................5
Flux Characteristics, Standard Order
EasyWhite
• 85 °C binning and characterization
Codes and Bins, 12-V XM‑L2 EZW................6
LEDs can reduce LED-to-LED color
• Available in 6‑V and 12‑V versions
Flux Characteristics, ANSI Order Codes
variation to within a 2‑step MacAdam
• Low thermal resistance: 2.5 °C/W
and Bins, 12-V XM‑L2 EZW............................8
ellipse, 94% smaller than the total area
• Wide viewing angle: 115°
Relative Spectral Power Distribution............9
of the corresponding ANSI C78.377 color
• Wide variety of CRI choices: standard
Relative Flux vs. Junction Temperature........9
CRI as well as 80- & 90‑minimum CRI
Electrical Characteristics............................ 10
region.
The XLamp XM-L2 EasyWhite LED is the
perfect choice for lighting applications
where high luminous flux output is
• Electrically neutral thermal path
Relative Flux vs. Current............................. 11
• Unlimited floor life at ≤ 30 ºC/85%
Relative Chromaticity vs. Current and
RH
• Reflow solderable - JEDEC
Temperature................................................ 12
Typical Spatial Distribution......................... 13
required from a single, small point
J‑STD‑020C
Thermal Design........................................... 13
source. Example applications include
• RoHS‑compliant
Performance Groups – Brightness............ 14
LED retrofit bulbs, commercial/retail
• UL® recognized component
Performance Groups – Chromaticity......... 14
display spotlights, and other indoor
general‑illumination applications.
(E349212)
CLD-DS93 Rev 3D
Product family data sheet
Cree EasyWhite® Bins Plotted on the 1931
CIE Color Space.......................................... 15
Cree’s Standard Cool White Kits Plotted
on ANSI Standard Chromaticity Regions... 16
Cree ANSI White Bins Plotted on the 1931
CIE Color Space.......................................... 16
www.cree.com/Xlamp
Bin and Order Code Formats...................... 17
Reflow Soldering Characteristics............... 18
Notes........................................................... 19
Mechanical Dimensions............................. 20
Tape and Reel.............................................. 21
Packaging.................................................... 22
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and
EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
1
XLamp ® XM-L2 EasyWhite ® LED
Characteristics
Characteristics
Unit
Thermal resistance, junction to solder point
°C/W
2.5
degrees
115
Temperature coefficient of voltage (6 V)
mV/°C
-5
Temperature coefficient of voltage (12 V)
mV/°C
-10
Viewing angle (FWHM)
ESD withstand voltage (HBM per Mil-Std-883D)
Minimum
Typical
Maximum
V
8000
DC forward current (6 V)
mA
2000
DC forward current (12 V)
mA
1000
Reverse current (6 V, 12 V)
mA
0.1
Forward voltage (@ 700 mA, 85 °C, 6 V)
V
5.8
6.5
Forward voltage (@ 350 mA, 85 °C, 12 V)
V
11.6
13.0
LED junction temperature
°C
150
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® XM-L2 EasyWhite ® LED
Flux Characteristics, Standard Order Codes and Bins, 6-V XM‑L2 EZW (700 mA, Tj = 85 °C)
The following table provides the order codes for 6-volt XLamp XM-L2 EZW LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 17).
Color
CCT
Range
5000 K
4000 K
Standard
CRI
EasyWhite
3500 K
3000 K
2700 K
Minimum Luminous Flux
@ 700 mA
2-Step
4-Step
Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
V2
400
466
V3
420
486
V4
440
513
XMLBEZ-00-0000-0B00V450H
XMLBEZ-00-0000-0B00V450F
U6
380
443
XMLBEZ-00-0000-0B00U640H
XMLBEZ-00-0000-0B00U640F
V2
400
466
V3
420
486
V4
440
513
XMLBEZ-00-0000-0B00V440H
XMLBEZ-00-0000-0B00V440F
U5
360
420
XMLBEZ-00-0000-0B00U535H
XMLBEZ-00-0000-0B00U535F
U6
380
443
V2
400
466
V3
420
486
XMLBEZ-00-0000-0B00V335H
XMLBEZ-00-0000-0B00V335F
U5
360
420
XMLBEZ-00-0000-0B00U530H
XMLBEZ-00-0000-0B00U530F
U6
380
443
V2
400
466
U5
360
420
U6
380
443
Chromaticity
Region
Order Code
Chromaticity
Region
XMLBEZ-00-0000-0B00V250H
50H
40H
35H
30H
XMLBEZ-00-0000-0B00V350H
XMLBEZ-00-0000-0B00V240H
XMLBEZ-00-0000-0B00V340H
XMLBEZ-00-0000-0B00U635H
XMLBEZ-00-0000-0B00V235H
XMLBEZ-00-0000-0B00U630H
XMLBEZ-00-0000-0B00V250F
50F
40F
35F
30F
XMLBEZ-00-0000-0B00V230H
27H
XMLBEZ-00-0000-0B00U527H
XMLBEZ-00-0000-0B00U627H
Order Code
XMLBEZ-00-0000-0B00V350F
XMLBEZ-00-0000-0B00V240F
XMLBEZ-00-0000-0B00V340F
XMLBEZ-00-0000-0B00U635F
XMLBEZ-00-0000-0B00V235F
XMLBEZ-00-0000-0B00U630F
XMLBEZ-00-0000-0B00V230F
27F
XMLBEZ-00-0000-0B00U527F
XMLBEZ-00-0000-0B00U627F
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 19).
• For Standard CRI parts, typical CRI is 75 for 5000 - 4000­-K CCT parts, 80 for 4000 – 3500-K CCT parts and 82 for 3000 – 2700-K CCT
parts.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp ® XM-L2 EasyWhite ® LED
Flux Characteristics, Standard Order Codes and Bins, 6-V XM‑L2 EZW (700 mA, Tj = 85 °C) Continued
Color
CCT
Range
5000 K
4000 K
80-CRI
Minimum
EasyWhite
3500 K
3000 K
2700 K
3000 K
90-CRI
Minimum
EasyWhite
2700 K
Minimum Luminous Flux
@ 700 mA
2-Step
4-Step
Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
U6
380
443
V2
400
466
V3
420
486
XMLBEZ-00-0000-0B0HV350H
XMLBEZ-00-0000-0B0HV350F
U6
380
443
XMLBEZ-00-0000-0B0HU640H
XMLBEZ-00-0000-0B0HU640F
V2
400
466
V3
420
486
XMLBEZ-00-0000-0B0HV340H
XMLBEZ-00-0000-0B0HV340F
U5
360
420
XMLBEZ-00-0000-0B0HU535H
XMLBEZ-00-0000-0B0HU535F
U6
380
443
V2
400
466
Chromaticity
Region
Order Code
Chromaticity
Region
XMLBEZ-00-0000-0B0HU650H
50H
40H
35H
XMLBEZ-00-0000-0B0HV250H
XMLBEZ-00-0000-0B0HV240H
XMLBEZ-00-0000-0B0HU635H
XMLBEZ-00-0000-0B0HV235H
Order Code
XMLBEZ-00-0000-0B0HU650F
50F
40F
35F
XMLBEZ-00-0000-0B0HV250F
XMLBEZ-00-0000-0B0HV240F
XMLBEZ-00-0000-0B0HU635F
XMLBEZ-00-0000-0B0HV235F
V3
420
486
XMLBEZ-00-0000-0B0HV335H
XMLBEZ-00-0000-0B0HV335F
U4
340
396
XMLBEZ-00-0000-0B0HU430H
XMLBEZ-00-0000-0B0HU430F
U5
380
443
U6
380
443
V2
400
466
XMLBEZ-00-0000-0B0HV230H
XMLBEZ-00-0000-0B0HV230F
U4
340
396
XMLBEZ-00-0000-0B0HU427H
XMLBEZ-00-0000-0B0HU427F
U5
380
443
U6
380
443
XMLBEZ-00-0000-0B0HU627H
XMLBEZ-00-0000-0B0HU627F
T4
240
280
XMLBEZ-00-0000-0B0UT430H
XMLBEZ-00-0000-0B0UT430F
T5
260
303
T6
280
326
XMLBEZ-00-0000-0B0UT630H
XMLBEZ-00-0000-0B0UT630F
T4
240
280
XMLBEZ-00-0000-0B0UT427H
XMLBEZ-00-0000-0B0UT427F
T5
260
303
T6
280
326
30H
27H
30H
27H
XMLBEZ-00-0000-0B0HU530H
XMLBEZ-00-0000-0B0HU630H
XMLBEZ-00-0000-0B0HU527H
XMLBEZ-00-0000-0B0UT530H
XMLBEZ-00-0000-0B0UT527H
XMLBEZ-00-0000-0B0UT627H
30F
27F
30F
27F
XMLBEZ-00-0000-0B0HU530F
MLBEZ-00-0000-0B0HU630F
XMLBEZ-00-0000-0B0HU527F
XMLBEZ-00-0000-0B0UT530F
XMLBEZ-00-0000-0B0UT527F
XMLBEZ-00-0000-0B0UT627F
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 19).
• For Standard CRI parts, typical CRI is 75 for 5000 - 4000­-K CCT parts, 80 for 4000 – 3500-K CCT parts and 82 for 3000 – 2700-K CCT
parts.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp ® XM-L2 EasyWhite ® LED
Flux Characteristics, ANSI Order Codes and Bins, 6-V XM‑L2 EZW (700 mA, Tj = 85 °C)
Color
Minimum Luminous Flux
@ 700 mA
CCT Range
6500 K
Standard CRI
ANSI White
5700 K
6500 K
80-CRI
Minimum
ANSI White
5700 K
Chromaticity Regions
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
V2
400
466
V3
420
486
Order Code
XMLBEZ-00-0000-0B00V20E1
0E1
XMLBEZ-00-0000-0B00V30E1
V4
440
513
XMLBEZ-00-0000-0B00V40E1
V2
400
466
XMLBEZ-00-0000-0B00V20E2
V3
420
486
V4
440
513
XMLBEZ-00-0000-0B00V40E2
U6
380
443
XMLBEZ-00-0000-0B0HU60E1
V2
400
466
V3
420
486
XMLBEZ-00-0000-0B0HV30E1
U6
380
443
XMLBEZ-00-0000-0B0HU60E2
V2
400
466
V3
420
486
0E2
0E1
0E2
XMLBEZ-00-0000-0B00V30E2
XMLBEZ-00-0000-0B0HV20E1
XMLBEZ-00-0000-0B0HV20E2
XMLBEZ-00-0000-0B0HV30E2
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 19).
• For Standard CRI parts, typical CRI is 75 for 5000 - 4000­-K CCT parts, 80 for 4000 – 3500-K CCT parts and 82 for 3000 – 2700-K CCT
parts.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp ® XM-L2 EasyWhite ® LED
Flux Characteristics, Standard Order Codes and Bins, 12-V XM‑L2 EZW (350 ma, TJ = 85 °C)
The following table provides the order codes for 12-volt XLamp XM-L2 EZW LEDs.For a complete description of the order code
nomenclature, please see the Bin and Order Code Formats section (page 17).
Color
CCT
Range
5000 K
4000 K
Standard
CRI
EasyWhite
3500 K
3000 K
2700 K
Minimum Luminous Flux
@ 350 mA
2-Step
4-Step
Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
V2
400
466
V3
420
486
V4
440
513
XMLBEZ-00-0000-0D00V450H
XMLBEZ-00-0000-0D00V450F
U6
380
443
XMLBEZ-00-0000-0D00U640H
XMLBEZ-00-0000-0D00U640F
V2
400
466
V3
420
486
V4
440
513
XMLBEZ-00-0000-0D00V440H
XMLBEZ-00-0000-0D00V440F
U5
360
420
XMLBEZ-00-0000-0D00U535H
XMLBEZ-00-0000-0D00U535F
U6
380
443
V2
400
466
V3
420
486
XMLBEZ-00-0000-0D00V335H
XMLBEZ-00-0000-0D00V335F
U5
360
420
XMLBEZ-00-0000-0D00U530H
XMLBEZ-00-0000-0D00U530F
U6
380
443
V2
400
466
U5
360
420
U6
380
443
Chromaticity
Region
Order Code
Chromaticity
Region
XMLBEZ-00-0000-0D00V250H
50H
40H
35H
30H
XMLBEZ-00-0000-0D00V350H
XMLBEZ-00-0000-0D00V240H
XMLBEZ-00-0000-0D00V340H
XMLBEZ-00-0000-0D00U635H
XMLBEZ-00-0000-0D00V235H
XMLBEZ-00-0000-0D00U630H
XMLBEZ-00-0000-0D00V250F
50F
40F
35F
30F
XMLBEZ-00-0000-0D00V230H
27H
XMLBEZ-00-0000-0D00U527H
XMLBEZ-00-0000-0D00U627H
Order Code
XMLBEZ-00-0000-0D00V350F
XMLBEZ-00-0000-0D00V240F
XMLBEZ-00-0000-0D00V340F
XMLBEZ-00-0000-0D00U635F
XMLBEZ-00-0000-0D00V235F
XMLBEZ-00-0000-0D00U630F
XMLBEZ-00-0000-0D00V230F
27F
XMLBEZ-00-0000-0D00U527F
XMLBEZ-00-0000-0D00U627F
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 19).
• For Standard CRI parts, typical CRI is 75 for 5000 - 4000­-K CCT parts, 80 for 4000 – 3500-K CCT parts and 82 for 3000 – 2700-K CCT
parts.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp ® XM-L2 EasyWhite ® LED
Flux Characteristics, Standard Order Codes and Bins, 12-V XM‑L2 EZW (350 ma, TJ = 85 °C) cONTINUED
Color
CCT
Range
5000 K
4000 K
80-CRI
Minimum
EasyWhite
3500 K
3000 K
2700 K
3000 K
90-CRI
Minimum
EasyWhite
2700 K
Minimum Luminous Flux
@ 350 mA
2-Step
4-Step
Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
U6
380
443
V2
400
466
V3
420
486
XMLBEZ-00-0000-0D0HV350H
XMLBEZ-00-0000-0D0HV350F
U6
380
443
XMLBEZ-00-0000-0D0HU640H
XMLBEZ-00-0000-0D0HU640F
V2
400
466
V3
420
486
XMLBEZ-00-0000-0D0HV340H
XMLBEZ-00-0000-0D0HV340F
U5
360
420
XMLBEZ-00-0000-0D0HU535H
XMLBEZ-00-0000-0D0HU535F
U6
380
443
V2
400
466
Chromaticity
Region
Order Code
Chromaticity
Region
XMLBEZ-00-0000-0D0HU650H
50H
40H
35H
XMLBEZ-00-0000-0D0HV250H
XMLBEZ-00-0000-0D0HV240H
XMLBEZ-00-0000-0D0HU635H
XMLBEZ-00-0000-0D0HV235H
Order Code
XMLBEZ-00-0000-0D0HU650F
50F
40F
35F
XMLBEZ-00-0000-0D0HV250F
XMLBEZ-00-0000-0D0HV240F
XMLBEZ-00-0000-0D0HU635F
XMLBEZ-00-0000-0D0HV235F
V3
420
486
XMLBEZ-00-0000-0D0HV335H
XMLBEZ-00-0000-0D0HV335F
U4
340
396
XMLBEZ-00-0000-0D0HU430H
XMLBEZ-00-0000-0D0HU430F
U5
380
443
U6
380
443
V2
400
466
XMLBEZ-00-0000-0D0HV230H
XMLBEZ-00-0000-0D0HV230F
U4
340
396
XMLBEZ-00-0000-0D0HU427H
XMLBEZ-00-0000-0D0HU427F
U5
380
443
U6
380
443
XMLBEZ-00-0000-0D0HU627H
XMLBEZ-00-0000-0D0HU627F
T4
240
280
XMLBEZ-00-0000-0D0UT430H
XMLBEZ-00-0000-0D0UT430F
T5
260
303
T6
280
326
XMLBEZ-00-0000-0D0UT630H
XMLBEZ-00-0000-0D0UT630F
T4
240
280
XMLBEZ-00-0000-0D0UT427H
XMLBEZ-00-0000-0D0UT427F
T5
260
303
T6
280
326
30H
27H
30H
27H
XMLBEZ-00-0000-0D0HU530H
XMLBEZ-00-0000-0D0HU630H
XMLBEZ-00-0000-0D0HU527H
XMLBEZ-00-0000-0D0UT530H
XMLBEZ-00-0000-0D0UT527H
XMLBEZ-00-0000-0D0UT627H
30F
27F
30F
27F
XMLBEZ-00-0000-0D0HU530F
MLBEZ-00-0000-0D0HU630F
XMLBEZ-00-0000-0D0HU527F
XMLBEZ-00-0000-0D0UT530F
XMLBEZ-00-0000-0D0UT527F
XMLBEZ-00-0000-0D0UT627F
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 19).
• For Standard CRI parts, typical CRI is 75 for 5000 - 4000­-K CCT parts, 80 for 4000 – 3500-K CCT parts and 82 for 3000 – 2700-K CCT
parts.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp ® XM-L2 EasyWhite ® LED
Flux Characteristics, ANSI Order Codes and Bins, 12-V XM‑L2 EZW (350 mA, Tj = 85 °C)
Color
Minimum Luminous Flux
@ 350 mA
CCT Range
6500 K
Standard CRI
ANSI White
5700 K
6500 K
80-CRI
Minimum
ANSI White
5700 K
Chromaticity Regions
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
V2
400
466
V3
420
486
Order Code
XMLBEZ-00-0000-0D00V20E1
0E1
XMLBEZ-00-0000-0D00V30E1
V4
440
513
XMLBEZ-00-0000-0D00V40E1
V2
400
466
XMLBEZ-00-0000-0D00V20E2
V3
420
486
V4
440
513
XMLBEZ-00-0000-0D00V40E2
U6
380
443
XMLBEZ-00-0000-0D0HU60E1
V2
400
466
V3
420
486
XMLBEZ-00-0000-0D0HV30E1
U6
380
443
XMLBEZ-00-0000-0D0HU60E2
V2
400
466
V3
420
486
0E2
0E1
0E2
XMLBEZ-00-0000-0D00V30E2
XMLBEZ-00-0000-0D0HV20E1
XMLBEZ-00-0000-0D0HV20E2
XMLBEZ-00-0000-0D0HV30E2
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 19).
• For Standard CRI parts, typical CRI is 75 for 5000 - 4000­-K CCT parts, 80 for 4000 – 3500-K CCT parts and 82 for 3000 – 2700-K CCT
parts.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp ® XM-L2 EasyWhite ® LED
Relative Spectral Power
Relative Spectral Power Distribution
100%
Relative Radiant Power
80%
60%
Cool White
Warm White
40%
20%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Relative Flux Output vs. Junction Temperature
Relative Flux vs. Junction Temperature (6-V - IF = 700 mA; 12-V - IF = 350 mA)
120%
Relative Luminous Flux
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp ® XM-L2 EasyWhite ® LED
Electrical Characteristics
Electrical Characteristics (TJ = 85 °C)
2000
Forward Current (mA)
1750
1500
1250
XM-L2 EZW, 6V
1000
750
500
250
0
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
Forward Voltage (V)
Electrical Characteristics
1000
875
Forward Current (mA)
750
625
XM-L2 EZW, 12V
500
375
250
125
0
10.8
11.0
11.2
11.4
11.6
11.8
12.0
12.2
12.4
12.6
Forward Voltage (V)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp ® XM-L2 EasyWhite ® LED
Flux vs. Current
Relative Flux vs. Current (TJ = 85°C)
225%
Relative Luminous Flux
200%
175%
150%
125%
XM-L2 EZW, 6V
100%
75%
50%
25%
0%
Flux vs. Current
0
250
500
750
1000
1250
1500
1750
2000
Forward Current (mA)
225%
Relative Luminous Flux
200%
175%
150%
125%
XM-L2 EZW, 12V
100%
75%
50%
25%
0%
0
125
250
375
500
625
750
875
1000
Forward Current (mA)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp ® XM-L2 EasyWhite ® LED
XM-L2
EZW 6V
Relative
Chromaticity vs. Current and Temperature
XM-L2 EZW, 6 V
0.020
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
0
250
500
750
1000
1250
1500
1750
2000
Current (mA)
XM-L2 EZW 12V
XM-L2 EZW, 12 V
0.020
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
0
125
250
375
500
625
750
875
1000
Current (mA)
XM-L2 EZW, 6V, 12V
XM-L2 EZW, 6 V & 12 V
0.020
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
25
50
75
100
125
150
Tsp (°C)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp ® XM-L2 EasyWhite ® LED
Typical Spatial Radiation Pattern
Typical Spatial Distribution
100%
Relative Luminous Intensity
80%
60%
40%
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Angle (º)
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
Thermal
Design
(12V)
from
XML
DS in order to optimize lamp life
product
to be
designed
a manner
resistance
from the
solder
point
to ambient
Thermal
Design
(6V)
from inXML
DS that minimizes the thermal
and optical characteristics.
XM-L2 EZW, 6-VXM-L2 EZW, 12-V
1200
1000
2000
Maximum Current (mA)
Maximum Current (mA)
2500
1500
1000
Rj-a = 4°C/W
Rj-a = 7°C/W
500
800
600
400
Rj-a = 4°C/W
Rj-a = 7°C/W
200
Rj-a = 10°C/W
Rj-a = 10°C/W
0
Rj-a = 15°C/W
0
20
40
0
60
80
100
Ambient Temperature (ºC)
120
140
160
Rj-a = 15°C/W
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp ® XM-L2 EasyWhite ® LED
Performance Groups – Brightness (TJ = 85 °C)
XLamp XM-L2 EasyWhite LEDs are tested for luminous flux and placed into one of the following bins.
Group Code
Minimum Luminous
Flux @ 700 mA, 6 V,
@ 350 mA , 12 V
Maximum Luminous
Flux @ 700 mA, 6 V,
@ 350 mA, 12 V
T5
260
280
T6
280
300
U2
300
320
U3
320
340
U4
340
360
U5
360
380
U6
380
400
V2
400
420
V3
420
440
V4
440
460
V5
460
480
Performance Groups – Chromaticity (TJ = 85 °C)
XLamp XM-L2 EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates.
EasyWhite Color Temperatures – 4-Step
Code
50F
40F
35F
30F
27F
CCT
5000 K
4000 K
3500 K
3000 K
2700 K
EasyWhite Color Temperatures – 2-Step
x
y
0.3407
0.3459
0.3415
0.3586
0.3499
0.3654
0.3484
0.3521
0.3744
0.3782
0.3912
0.3917
0.3863
0.3981
Code
x
y
0.3429
0.3507
0.3434
0.3571
0.3475
0.3604
0.3469
0.3539
0.3685
0.3784
0.3741
0.3837
0.3804
0.3818
0.3867
0.3857
0.3758
0.3844
0.3778
0.3800
0.4030
0.3857
0.4040
0.3966
0.4061
0.3941
0.4186
0.4037
0.4132
0.3976
0.4116
0.3865
0.4099
0.3890
0.4242
0.3919
0.4291
0.3973
0.4322
0.4096
0.4333
0.4062
0.4449
0.4141
0.4395
0.4084
0.4359
0.3960
0.4351
0.3994
0.4475
0.3994
0.4528
0.4046
0.4573
0.4178
0.4578
0.4138
0.4695
0.4207
0.4638
0.4152
0.4589
0.4021
0.4586
0.4060
50H
40H
35H
30H
27H
CCT
5000 K
4000 K
3500 K
3000 K
2700 K
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp ® XM-L2 EasyWhite ® LED
Performance Groups - Chromaticity (Tj = 85 °C) - Continued
ANSI White Bins
Code
Bin
Code
CCT
1A0
1B0
0E1
6500 K
1C0
1D0
ANSI White Bins
x
y
0.3048
0.3130
0.3144
0.3186
Code
CCT
Bin
Code
x
y
0.3207
0.3215
0.3350
0.3290
0.3290
0.3417
0.3290
0.3300
2A0
0.3068
0.3113
0.3222
0.3243
0.3028
0.3304
0.3207
0.3462
0.3115
0.3391
0.3290
0.3538
0.3130
0.3290
0.3290
0.3417
0.3048
0.3207
0.3215
0.3350
0.3115
0.3391
0.3290
0.3538
0.3205
0.3481
0.3376
0.3616
0.3213
0.3373
0.3371
0.3490
0.3130
0.3290
0.3290
0.3417
0.3130
0.3290
0.3290
0.3417
0.3213
0.3373
0.3371
0.3490
0.3221
0.3261
0.3366
0.3369
0.3144
0.3186
0.3290
0.3300
2B0
0E2
5700 K
2C0
2D0
Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space (TJ = 85 °C)
0.45
ANSI C78.377 Quadrangle
EasyWhite 4-step
EasyWhite 2-step
0.44
2700 K
3000 K
0.43
3500 K
0.42
4000 K
4500 K
0.41
CCy
0.40
5000 K
0.39
5700 K
0.38
0.37
0.36
0.35
0.34
0.33
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.32
CCx
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp ® XM-L2 EasyWhite ® LED
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions
0.40
5000 K
0.39
0.38
5700 K
E2
0.37
6500 K
0.36
CCy
2T
E1
0.35
2C
1T
0T
0S
0.32
0B
0.31
3R
2A
1D
2U
ANSI
C78.377A
2R
1A
1U
0D
0A
2D
1C
1B
0C
3A
2B
1S
0.33
3B
2S
8000 K
0.34
3S
1R
0U
0.30
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
Cree ANSI White Bins Plotted on the 1931 CIE Color Space (TJ = 85 °C)
0.40
0.39
ANSI C78.377 Quadrangle
0.38
0.37
5700 K
CCy
0.36
0.35
6500 K
2B
0.34
0.33
0.32
2C
1C
1B
1D
2D
2A
1A
0.31
0.30
0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36
CCx
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp ® XM-L2 EasyWhite ® LED
Bin and Order Code Formats
Bin codes and order codes are configured as follows:
Order CodeBin Code
Series
XML = XM-L
Series
XML = XM-L
Internal code
Internal code
Kit code
Flux bin
SSSCCC-BB-HHHH-HGGANNNNN
CRI Specification
0 = Standard CRI
H = 80 CRI minimum
U = 90 CRI minimum
Vf class
B = 6-V class
D = 12-V class
Reel size
0 = 1000 (standard)
Color
BEZ = XM-L2 EasyWhite
Internal code
SSSCCC-B-WWW-FFF-GAAAAAA
CRI Specification
0 = Standard CRI
H = 80 CRI minimum
U = 90 CRI minimum
Vf class
B = 6-V class
D = 12-V class
Chromaticity bin
Color
BEZ = XM-L2 EasyWhite
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp ® XM-L2 EasyWhite ® LED
Reflow Soldering Characteristics
In testing, Cree has found XLamp XM-L2 EasyWhite LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below.
As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder
paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
Time
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
170 °C
Preheat: Time (tsmin to tsmax)
65-150 seconds
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
217 °C
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp ® XM-L2 EasyWhite ® LED
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please consult the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XM-L2 EasyWhite LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor
life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered
LEDs in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Vision Advisory
WARNING. Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
6
6
5
NOTICE
NOTICE
CREE CONFIDENTIAL. THIS
PLOT AND THE INFORMATION
CONTAINED
WITHINTHIS
AREPLOT
THE PROPRIETARY
AND
CREE
CONFIDENTIAL.
AND THE INFORMATION
CONFIDENTIAL
INFORMATION
OF CREE, INC.
THIS PLOT
CONTAINED
WITHIN
ARE THE PROPRIETARY
AND
MAY NOT BE COPIED,
REPRODUCED
OR
DISCLOSED
CONFIDENTIAL
INFORMATION
OF CREE,
INC.
THIS PLOTTO ANY
UNAUTHORIZED
PERSON
WITHOUT
THE WRITTEN
CONSENT
MAY
NOT BE COPIED,
REPRODUCED
OR DISCLOSED
TO ANY
OF CREE INC. PERSON WITHOUT
UNAUTHORIZED
THE WRITTEN CONSENT
5
OF CREE INC.
6
5
4
4
®
XLamp ® XM-L2 EasyWhite
LED
3
3
REV
REV
A
4
Mechanical Dimensions
3
A
2
REVISONS
NOTICE
CONFIDENTIAL. THIS PLOT AND THE INFORMATION
TAINED WITHIN ARE THE PROPRIETARY AND
FIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
D CONSENT
UTHORIZED PERSON WITHOUT
THE WRITTEN
REE INC.
D
REV
A
Thermal vias, if present, are not shown on these drawings.
BY
DESCRIPTION
DC
NEW RELEASE
All measurements are ±.13 mm unless otherwise indicated
3.02
3.02
5.00
5.00
4.78
.73
.73
.50
.50
3.78
2.78
.50
3.02
5.00
.73
4.
4.78
3.
3.78
2.
2.78
.50
.50
.50
5.00
5.00
5.00
C
C
4.78
R2.26
R2.26
Anode
Top View
R2.26
.50
.50
.80
.50
B
.80
.80
.50
.50
.50
.50
.25
.25
.50
.25
.50
B
Bottom View
Side View
.80
.80
.80
4.78
4.78
4.78
4.78
4.78
4.78
.25
.25
.25
2.78
A
2.78
2.78
4.78
4.78
A
4.78
RECOMMENDED PCB SOLDER PAD
4.78
4.78
.97
4.78
RECOMMENDED PCB SOLDER PAD
Recommended
PCB
Solder
RECOMMENDED PCB
SOLDER
PAD Pad STENCIL PATTERN
RECOMMENDED
(HATCHED AREA IS OPENING)
6
56
4
5
ALL DIME
ALL DIMEN
ALL DIMENSIONS ARE
RECOMMENDED STENCIL
PATTERN
UNLESS OTHERWISE
SPECIFIED
RECOMMENDED
STENCIL
PATTERN
DIMENSIONS
ARE IN
(HATCHED AREA
ISStencil
OPENING)
Recommended
Pattern
AND AFTER
FINISH.
(HATCHED AREA ISMILLIMETERS
OPENING)
TOLERANCE UNLESS SPECIFIED:
(Shaded Area Is .XX
Open)
±
.25
.XXX ±
X°
±
THIRD ANGLE PROJECTION
6
.97
.97
5
3
.125
.5 °
FOR SHEET METAL PARTS ONLY
.X
±
1.5
.XX
±
.75
.XXX ±
.25
X°
±
.5 °
4
4
SURFACE FINISH:
1.6
± .13MM UNLESS OTHERWISE NOTED
DATE
DRAWN BY
D. CRONIN
2/2/14
CHECK
.
DATE
--
UNLESS OTHERWISE SPECI
DIMENSIONSSPECIFIE
ARE IN
UNLESS OTHERWISE
MILLIMETERS
ANDARE
AFTER
DIMENSIONS
IN FIN
MILLIMETERS
AND
AFTERSPECI
FINIS
TOLERANCE
UNLESS
.XX SPECIFIE
±
.
TOLERANCE UNLESS
.XX.XXX± ± .25.
X° ± ± .125
.
.XXX
X° METAL
± PARTS
.5 °
FOR SHEET
--
APPROVED
DATE
THIRD ANGLE PROJECTION
TITLE
-THIRD -ANGLE PROJECTION
FOR SHEET
METAL
.X PARTS
± ON
OUTLINE
DRAWING,
X1
MATERIAL
--
SIZE
FINAL PROTECTIVE FINISH
-2
3
3
SCALE
C
.X .XX± ± 1.5.
.XX.XXX± ± .75.
X° ± ± .25.
.XXX
X°
±
.5 1.°
SURFACE FINISH:
1.6
SURFACE FINISH:
DRAWING NO.
2610-0
16.000
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
6
5
4
3
REVISIONS
4.00[.157]
DESCRIPTION
REV
BY
DATE
APP'D
POCKET SIZE
D
2.00[.079]
1
2
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE INC.
Do1.50
P2
+.10
+.0039
.0591
-.00
-.0000 [ ]
1.75[.069]
E1
Po
Tape and Reel
Ao -
5.40mm [.213"]
Bo -
5.40mm [.213"]
Ko -
3.35mm [.132"]
3.0°
XLamp ® XM-L2 EasyWhite ® LED
D
5.40[.213]
Bo
6
5
4
12.00[.472]
All Cree carrier tapes conform to EIA-481D, Automated
Component
Handling Systems
Standard.
6
5
4
5.50[.217]F
C
NOMINAL
OF CREE INC.
D
D
10.25
[.404]
E2
2
3
REV
12.30 [.484]
MAX
W
2.00[.079]
2.00[.079]
P2
1.50[.059]
4.00[.157]
D1
4.00[.157]
Po
8.00[.315]
P
3
C
NOTICE
CREE CONFIDENTIAL. THIS PLOT
AND THE INFORMATION
NOTICE
CONTAINED
WITHIN ARE THETHIS
PROPRIETARY
ANDINFORMATION
CREE CONFIDENTIAL.
PLOT AND THE
CONFIDENTIAL
INFORMATION
CREE,
INC. THIS PLOT
CONTAINED
WITHIN AREOF
THE
PROPRIETARY
AND
MAY NOT
BE COPIED, INFORMATION
REPRODUCEDOF
ORCREE,
DISCLOSED
TO PLOT
ANY
CONFIDENTIAL
INC. THIS
UNAUTHORIZED
PERSON
WITHOUT
THE WRITTEN
CONSENT
MAY NOT BE
COPIED,
REPRODUCED
OR DISCLOSED
TO ANY
OF CREE
INC.
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
B
6
5
C
NOTICE
TIAL. THIS PLOT AND THE INFORMATION
HIN ARE THE PROPRIETARY AND
NFORMATION OF CREE, INC. THIS PLOT
PIED, REPRODUCED OR DISCLOSED TO ANY
PERSON WITHOUTTHE WRITTEN CONSENT
A
Ao
B
3.0°
2
B
APP'D
DATE
APP'D
D
C
BY
DATE
DDS
11/8/10
DC
2/26/12
B
BS
MATERIAL
SIZE
FINAL PROTECTIVE FINISH
Direction
6
6
2402-00011
7.0°
2
4
Leader
400mm (min.) of
empty pockets with
at least 100mm
sealed by tape
5 pockets min.)
(40 empty
5
A
SHEET
7.0°
OF
B
1
3
2
1
2400-00009
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
12
INDEX
QTY
ITEM
COMMENTS
1
1
2400-00009-CORE
DRAWN BY
C
DATE
UNLESS OTHERWISE SPECIFIED
DATE
DRAWN BY
2 SPECIFIED
2 D. CRONIN
2400-00009-REEL
4/23/10
UNLESS ARE
OTHERWISE
DIMENSIONS
IN INCHES
D. CRONIN
4/23/10
DATE
DIMENSIONS
ARE IN INCHESCHECK
AND
AFTER FINISH.
CHECK
DATE
AND
AFTERSPECIFIED:
FINISH.
TOLERANCE
UNLESS
TOLERANCE
.XX ± UNLESS
.01 SPECIFIED:
APPROVED
DATE
TITLE
±
.01
.XXX .XX
±
.005
APPROVED
DATE
TITLE
X°
±.XXX .5± ° .005
THIRD ANGLE PROJECTION
MATERIAL
X° PARTS
±
.5
°
FOR SHEET METAL
ONLY
THIRD ANGLE PROJECTION
MATERIAL
FOR.XSHEET
± METAL
.06 PARTS ONLY
DRAWING NO.
SIZE
.XX .X
±
±.03 .06
DRAWING NO.
SIZE
FINAL PROTECTIVE FINISH
±
.03
.XXX .XX
±
.010
FINAL PROTECTIVE FINISH
X°
±.XXX .5± ° .010
SCALE
X°
±
.5 °
SURFACE FINISH: 63
SCALE
DRAWING
SCALE
SURFACE FINISH: 63
DRAWING SCALE
4600 Silicon Drive
Durham,
N.C
27703
4600
Silicon
Drive
Durham,
N.C 27703
Phone (919)
313-5300
Phone
(919) 313-5300
Fax (919)
313-5558
Fax (919) 313-5558
XMXM
5050
CARRIER
TAPE
5050
CARRIER
TAPE
D
2402-00011
A
2402-00011 A
A
4
3
4
2
3
2
SHEET
OF
SHEET
1
1OF / 1
1
12.4
+.2
.0
MEASURED AT HUB
C
330
+.25
-.75
16.4
+0.2
.0
MEASURED AT HUB
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
FOR SHEET METAL PARTS ONLY
.X
±
1.5
.XX ±
.75
.XXX ±
.25
X°
±
.5 °
SURFACE FINISH:
5
4
1.6
3
1.9±.4
DATE
DRAWN BY
D. CRONIN
CHECK
21 ±.4
4600 Silicon Drive
Durham, N.C 27703
06/08/10
DATE
--
Phone (919) 313-5300
--
Fax (919) 313-5558
A
DATE
APPROVED
--
--
MATERIAL
TITLE
13.1 ±.2
--
SIZE
FINAL PROTECTIVE FINISH
--
SCALE
XM LOADING SPEC
REV.
DRAWING NO.
C
2402-00012
SHEET
3.000
2
B
OF
B
1 /1
1
12.4
+1.0
-.5
MEASURED AT EDGE
60°
60°
REVISONS
REV
DESCRIPTION
A
BY
DATE
APP'D
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
UNLESS OTHERWISE SPECIFIED
DRAWN BY
THIRD ANGLE PROJECTION
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.01
.XXX ±
.005
X°
±
.5 °
FOR SHEET METAL PARTS ONLY
D. CRONIN
CHECK
DATE
4600 Silicon Drive
Durham, N.C 27703
09/29/09
21
DATE
-APPROVED
-MATERIAL
Phone (919) 313-5300
--
Fax (919) 313-5558
DATE
--
A
REV.
B
C
B
1 /1
3.35
1.75
3.35[.132]
3.35[.132]
Ko
Ko
START
Ao
REV.
DRAWING NO.
DRAWING SCALE
ANODE SIDE
A
A
SCALE
D
.36[.014]
T .36[.014]
T
A
XM 5050 CARRIER TAPE
5.40[.213]
5.40[.213]
Ao
Loaded Pockets
(1000 Lamps)
1.50[.059]
Phone (919) 313-5300
Fax (919) 313-5558
D1 1.50[.059]
D1
8.00[.315]
DATE
8.00[.315]
P TITLE
P
CATHODE SIDE
4
5
4600 Silicon Drive
Durham, N.C 27703
4/23/10
DATE
APPROVED
FOR SHEET METAL PARTS ONLY
.X
±
.06
.XX ±
.03
.XXX ±
.010
X°
±
.5 °
8
6
D. CRONIN
CHECK
3
A
B
C
APP'D
DATE
DRAWN BY
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.01
.XXX ±
.005
X°
±
.5 °
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTANED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE INC.
6
D
5.40[.213]
5.40[.213]
Bo
Bo
3.0°
1
DESCRIPTION
A
4
Trailer
160mm (min) of
empty pockets
sealed with tape
(15 pockets min.)
12.00[.472]
12.00[.472]
NOMINAL
REVISONS
NOMINAL
10.25 12.30 [.484]
12.30
[.484]
10.25
Loaded
pocket count
was
750
MAX
[.404]
[.404]
W MAX
MADE CATHODE
AND ANODE
NOTE LARGER
E2
W
E2
REV
63
SURFACE FINISH:
User Feed
5
D
5.50[.217]F
5.50[.217]F
DATE
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
THIRD ANGLE PROJECTION
END
3
3.35[.132]
Ko
5.40[.213]
6
4
C
BY
BoBo
- - 5.40mm
[.213"]
5.40mm
[.213"]
KoKo
- - 3.35mm
[.132"]
3.35mm
[.132"]
B
7.0°
BY
POCKET
SIZE
POCKET
SIZE
AoAo
- - 5.40mm
[.213"]
5.40mm [.213"]
1.75[.069]
E1 1.75[.069]
E1
.36[.014]
T
Po
1
All dimensions in mm.
REV
+.10
+.0039
Do1.50
.0591
+.0039
-.00 +.10 .0591
-.0000
[]
Do1.50
-.00
-.0000 [ ]
P2
1
2
REVISIONS
REVISIONS
DESCRIPTION
DESCRIPTION
TITLE
REEL, 13" X 12MM, 3 PIECE SNAP
A
REV.
A
1 /1
A
XLamp ® XM-L2 EasyWhite ® LED
Humidity Indicator
Card (inside bag)
Packaging
Dessicant
(inside bag)
Unpackaged Reel
Label with Cree Bin Code,
Quantity, Reel ID
Packaged Reel
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Label with Custo
Code, Qty, Reel I
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Patent Label
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22