LMD125 Module Driver

Cree® LMD125 LED Module Drivers
Product Description
Cree
LED
modules
provide
lighting
designers and manufacturers with simple,
easy‑to‑adopt LED lighting solutions that
reduce luminaire development time and
speed
time‑to‑market.
Cree
LMD125
LED module drivers are specifically
designed to work with the Cree LMH2
850-
and
1250‑lumen
light
sources
features
Table of Contents
• Input voltages options: 100‑120 V,
Order Codes.................................................2
230 V & 277 V
• TRIAC dimming support for
100‑120 V and 230 V options
• Optimized for Cree LMH2
850-lm & 1250-lm light sources
• LMD125 100‑120 V driver is PSE
certified
CLM-DS13 Rev 2D
LED Module Driver data sheet
Characteristics - LMD125 100- to 120‑V
Driver.............................................................2
Characteristics - LMD125 230‑V Driver......2
Characteristics - LMD125 277‑V Driver......3
Dimming.......................................................3
Mechanical Dimensions..............................8
Wiring Diagrams...........................................9
to jump‑start the design process for
Thermal Design......................................... 10
recessed downlights, wall sconces or
Emergency Battery Operation.................. 11
pendant lights in demanding end markets
Safety and Regulatory Notes.................... 11
such as retail, museums, hospitality and
Packaging.................................................. 12
www.cree.com/modules
restaurants.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
1
LMD125 LED Module Driver
Order Codes
Nominal Input
Voltage (VAC)
Frequency (Hz)
Typical Output Current
(mA)
Dimming
Order Code
100‑120
50/60
440
TRIAC
LMD125-0018-C440-1010000
230
50/60
440
TRIAC
LMD125-0018-C440-2010000
277
60
440
N/A
LMD125-0017-C440-3000000
Characteristics - LMD125 100- to 120‑V Driver
Order Code: LMD125-0018-C440-1010000
Characteristics
Unit
Minimum
Typical
Maximum
Input voltage range
VAC
90
120
132
Input power
W
18
Output current
mA
440
Output voltage
V
Driver efficacy (@ 55 °C) - with LMH2 850-lm light
source
%
80
Driver efficacy (@ 55 °C) - with LMH2 1250-lm light
source
%
81
21
35
Power factor - with LMH2 850-lm light source
0.97
Power factor - with LMH2 1250-lm light source
0.99
LED driver case temperature
°C
0
80
Characteristics
Unit
Minimum
Typical
Maximum
Input voltage range
VAC
207
230
253
Characteristics - LMD125 230‑V Driver
Order Code: LMD125-0018-C440-2010000
Input power
W
18
Output current
mA
440
Output voltage
V
Driver efficacy (@ 55 °C) - with LMH2 850-lm light
source
%
80
Driver efficacy (@ 55 °C) - with LMH2 1250-lm light
source
%
81
37
Power factor - with LMH2 850-lm light source
0.90
Power factor - with LMH2 1250-lm light source
LED driver case temperature
•
0.95
°C
0
80
3-D models (.STEP files) for the LMD125 LED module drivers are available on the Cree website by selecting the Documentation tab
on the LMH2 product page.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
LMD125 LED Module Driver
Characteristics - LMD125 277‑V Driver
Order Code: LMD125-0017-C440-3000000
Characteristics
Unit
Minimum
Typical
Maximum
Input voltage range
VAC
249
277
305
Input power
W
17
Output current
mA
440
Output voltage
V
Driver efficacy (@ 55 °C) - with LMH2 850-lm light
source
%
84
Driver efficacy (@ 55 °C) - with LMH2 1250-lm light
source
%
84
21
35
Power factor - with LMH2 850-lm light source
0.92
Power factor - with LMH2 1250-lm light source
0.98
LED driver case temperature
•
°C
0
80
3-D models (.STEP files) for the LMD125 LED module drivers are available on the Cree website by selecting the Documentation tab
on the LMH2 product page.
Dimming
The LMH2 850- and 1250‑lm light sources combined with the LMD125 100- to 120-V and 230‑V drivers work with standard leading- and
trailing‑edge dimming technologies to reduce light levels down to 5%.
Driver
Input Voltage
LMD125
Dimming
Lowest Light Level
100-120 V
TRIAC
5%
230 V
TRIAC
5%
277 V
None
-
Note - Most residential dimmers are designed to control 600 to 1000 watts of power with standard lighting technologies,
i.e., incandescent and halogen. Because the LMH2 LED module has a much higher efficacy (lumens per watt) than
standard lighting fixtures, it requires much less power. There may be some cases that require the use of more than one
LMH2 LED module or lighting fixture on a single dimmer to achieve the minimum dimmer load. This depends heavily
upon the particular dimmer used. Partial lists of compatible dimmers are provided below.
100-VAC Dimmer Compatibility with WhiteLight Dimming
Manufacturer
Cooper
Model/Series
Part Number
Type
Compatible with 1
LMH2
Compatible with 2
LMH2s
Compatible with 3
LMH2s
6020
IND



DI10P
IND



SI061-V
IND



SLC03P
CFL/IND



Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
LMD125 LED Module Driver
Manufacturer
Leviton
Lutron
Model/Series
Part Number
Type
Compatible with 1
LMH2
Compatible with 2
LMH2s
Compatible with 3
LMH2s
Acenti
ACE06
ELV




Acenti
AT106-1LW
IND


Decora
6631-LW
IND



Illumatech
IPI06
IND



Illumatech
IP110
IND



Mural
MDE03-1
ELV



Vizia
VP106
IND



Vizia
VPE04
IND



Ceana
CN-600P
IND



Ceana
CNLV-V-600P
MLV



Centurion
C-600
IND



Decora
HCM06-1DW
IND/MLV



Diva
DV-10P
IND



Diva
DV-600P
IND



Diva
DVELV-300P
ELV



Diva
DVLV-600P
MLV



Diva
DVWCL-153DH
CFL/LED



Faedra
FAELV-500
ELV



Glyder
GL-600M
IND/HAL



Lumea
LG-603PG
IND



Lyneo
LX-600PL
IND



Maestro
MA-1000
IND


Maestro
MACL-153M
CFL/LED



Maestro
MAELV-600
MLV



Maestro
MAW-600
IND


Nova
N-600
IND



Nova
NLV-1503P
MLV



Nova T
NT-603P
IND



Nova T
NTB-600
IND



Nova T
NTELV-600
ELV



RadioRA2
RRD-6NA
IND/ELV/HAL/MLV


Skylark
S2-L
INC/HAL


Skylark
S-600
IND



Skylark
SF-10P
FLR



Skylark
SELV-300P
ELV



Skylark
SLV-600P
MLV



Sureslide
6673-P
CFL



Toggler
TG-600PR-W4
IND/MLV



Pass and Seymour
Wattstopper
90680-W
IND



LS600
IND



MCD267-W
UNI



CFL = Compact fluorescent dimmer
IND = Incandescent dimmer
ELV = Electronic low-voltage dimmer
LED = Light-emitting diode dimmer
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
LMD125 LED Module Driver
FLR = Fluorescent dimmer
MLV = Magnetic low-voltage dimmer
HAL = Halogen dimmer
UNI = Universal dimmer
The presence of a dimmer in the above table is not a guarantee or warranty of the compatibility of the LMH2 product family in any
particular installation. The absence of a dimmer from the tables does not necessarily imply incompatibility. Please refer to the dimmer
manufacturer’s instructions for installation and further product information.
120-VAC Dimmer Compatibility with WhiteLight Dimming
Manufacturer
Model/Series
Cooper
Leviton
Lutron
Part Number
Type
Compatible with 1
LMH2
Compatible with 2
LMH2s
Compatible with 3
LMH2s
6020
IND



DI06-V
IND



DI10P
IND



Acenti
ACE06
ELV



Acenti
AT106-1LW
IND



Illumatech
IPI06
IND



Illumatech
IP110
IND



Mural
MDE03-1
ELV



Vizia
VP106
IND



Vizia
VPE04
IND



Centurion
C-600
IND



Decora
HCM06-1DW
IND/MLV




Diva
DV-10P
IND
Diva
DV-600P
IND

Diva
DVELV-300P
ELV





Diva
DVF-103P
FLR

Diva
DVLV-600P
MLV

Diva
DVWCL-153DH
CFL/LED



Faedra
FAELV-500
ELV



Lyneo
LX-600PL
IND



Maestro
MA-1000
IND



Maestro
MAELV-600
MLV



Nova
NLV-1503P
MLV






Nova T
NT-603P
IND
Nova T
NTELV-600
ELV



RadioRA2
RRD-6NA
IND/ELV/HAL/MLV



RadioRA2
RRD-10ND
IND/HAL/MLV



Skylark
S-600
IND

Skylark
SF-10P
FLR



Skylark
SELV-300P
ELV

Skylark
SLV-600P
MLV

Sureslide
6673-P
CFL



Toggler
TG-600PR-W4
IND/MLV



Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
LMD125 LED Module Driver
Manufacturer
Model/Series
Pass and Seymour
Wattstopper
Part Number
Type
Compatible with 1
LMH2
Compatible with 2
LMH2s
Compatible with 3
LMH2s
90680-W
IND



LS600
IND



MCD267-W
UNI



CFL = Compact fluorescent dimmer
IND = Incandescent dimmer
ELV = Electronic low-voltage dimmer
LED = Light-emitting diode dimmer
FLR = Fluorescent dimmer
MLV = Magnetic low-voltage dimmer
HAL = Halogen dimmer
UNI = Universal dimmer
The presence of a dimmer in the above table is not a guarantee or warranty of the compatibility of the LMH2 product family in any
particular installation. The absence of a dimmer from the tables does not necessarily imply incompatibility. Please refer to the dimmer
manufacturer’s instructions for installation and further product information.
120-VAC Dimmer Compatibility with Sunset Dimming
Manufacturer
Leviton
Lutron
Model/Series
Part Number
Type
Compatible with 1
LMH2
Compatible with 2
LMH2s
Compatible with 3
LMH2s
Illumatech
IPE04-1LX
ELV




Diva
DVELV-300P
ELV


Faedra
FAELV-500
ELV



Maestro
MAELV-600
MLV



Nova T
NTELV-600
ELV



Skylark
SELV-300P
ELV



ELV = Electronic low-voltage dimmer
MLV = Magnetic low-voltage dimmer
The presence of a dimmer in the above table is not a guarantee or warranty of the compatibility of the LMH2 product family in any
particular installation. The absence of a dimmer from the tables does not necessarily imply incompatibility. Please refer to the dimmer
manufacturer’s instructions for installation and further product information.
230-VAC Dimmer Compatibility with WhiteLight Dimming
Manufacturer
100 Million Beautiful Elec.
Berker
Busch-Jaeger
Clipsal
Model/Series
Part Number
Type
Compatible with 1
LMH2
Compatible with 2
LMH2s
None
None
Leading edge


Drehdimmer
2830 10
Leading edge


2247 U
6512-0-0057
Leading edge


2250 U
6515-0-0704
Leading edge


6513 U-102
6513-0-0568
Trailing edge


6517 U-101
6517-0-0016
Leading edge


E30 System
32E450LM
Leading edge


E2000
E2031LPD600
Leading edge


E30 System
E32V500/2K
Leading edge


Vivace
KB31RD400
Leading edge


Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
LMD125 LED Module Driver
Manufacturer
Model/Series
Part Number
Type
Compatible with 1
LMH2
Compatible with 2
LMH2s
Feller
Drehdimmer
40383.BSE
Leading edge


Drehdimmer
40600.RLC.BSE
UNI


Drehdimmer
40683.BSE
Leading edge


None
FD630D
Leading edge


IEC 60669-2-1
PT15625-2871
Leading edge


D1
None
Leading edge


Gluhlampen
0302 00 / I01
Leading edge


System 2000
0305 00 / I04
UNI


Gluhlampen
0306 00 / I00
Leading edge


Tronic
0307 00 / I02
Trailing edge


Gluhlampen
1181 00 / I02
Leading edge


Niedervolt
2262 00 / I00
Leading edge


HPM
400T
050411/2/1A
Trailing edge


Jung
Gluhlampen
211 GDE
Leading edge


None
AL-18
Leading edge


None
BP-81
Leading edge


KI
None
None
Leading edge


Legrand
Arteor
5740 08
UNI


Flexalite
Fung Yip Electrical
Futina
Gira
Key-Top
Arteor
5743 08
UNI


PRO 21
7756 37
UNI


PRO 21
7759 03
Trailing edge


Trimatron
012-6602-220
Leading edge


Excella
K52-BLE04-2LW
Trailing edge


Manhattan
K02-BME04-2LW
Trailing edge


Lutron
Lyneo
LLSM-502
Leading edge


Mank
None
None
Leading edge


600
634M
Leading edge


Gluhlampen
5TC8 256
Leading edge


μ-Contact
5TGO752-1NC1
Leading edge


None
BP-600
Leading edge


Leviton
PDL
Siemens
Super
The presence of a dimmer in the above tables is not a guarantee or warranty of the compatibility of the LMH2 product family in any
particular installation. The absence of a dimmer from the tables does not necessarily imply incompatibility. Please refer to the dimmer
manufacturer’s instructions for installation and further product information.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
LMD125 LED Module Driver
Mechanical Dimensions
Physical Characteristics of the LMD125
Physical Characteristic
LMD125 100- to 120-V and 277-V Driver
LMD125 230-V Driver
Weight (g)
114
146
Maximum height (mm)
29.5
33
Maximum length (mm)
81
123
Maximum width (mm)
56
79
LMD125 100- to 120-V and 277-V Drivers1
152 3
STRIPPED 10
29.5
12.2
31.2
28.6
23.5
56
47
23.5
28
40
M4 OR #8
MOUNTING SLOT
TYP 2X
Tc LOCATION
72
80.4
WIRE ROUTING SLOT
TYP 6X
LMD125 230-V Driver
123
112.3
41.5
LINE
NEUTRAL
79 68.3
+
-
26.5
M4 OR #8
MOUNTING SLOT
TYP 2X
1
Tc LOCATION
33
Dimensions for all the LMD125 diagrams are in mm and are for reference only. For exact dimensions and tolerances, refer to the 3-D models (.STEP
files) for the LMD125 drivers available by selecting the Documentation tab on the LMH2 product page.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
LMD125 LED Module Driver
Wiring Diagrams
The unique design of the LMD125 LED module driver allows it to be mounted on an internal surface or to a junction box cover. For the
100- to 120-V and 277-V drivers, the leads can be routed through holes in a junction box cover and accessed in a standard junction box.
When surface mounted, the LMD125 driver leads can be routed through the various wiring slots on each side.
Electrical Connection
For the LMD125 100- to 120-V and 277-V LED module drivers, LMH2 LED module operation is accomplished by connecting the AC mains
to the two (2) lead wires (line and neutral) from the driver and connecting the driver output wires to the input leads on the Cree LMH2 light
source, as indicated in the following wiring diagrams. For the LMD125 230-V LED module driver, module operation is accomplished by
connecting the AC mains to the appropriate terminal block pins.
The LMD125 100- to 120-V and LMD125 277-V LED module driver lead wires are 152.4 mm long, 18 AWG with the ends stripped 10 mm.
The LMD125 230-V LED module drivers have poke‑in terminals.
LMD125 100- to 120-V and 277-V Drivers
100-120/277 VAC
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
LMD125 LED Module Driver
LMD125 230-V Driver
Wiring Strain Relief
LMD125 LED module drivers must not be suspended directly by the leads. Though the wiring from the LMD125 LED module driver is
internally strain relieved, additional strain relief methods must be employed if the luminaire is to be suspended solely by the wiring, as in
a pendant luminaire.
Thermal Design
Expected LMD125 Lifetime versus Temperature at Tc Point
Expected Operation Life (Hours)
Tc (°C) @ 25 °C Room Ambient
LMD125 100- to 120-V and 277-V Driver
LMD125 230-V Driver
35,000
73
74
50,000
67
68
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
LMD125 LED Module Driver
Emergency Battery Operation
The LMD125 LED module drivers are constant-current supplies. Interrupting the driver current with a battery supply is an acceptable
method of emergency or power outage operation. An acceptable installation should also include a switching mechanism that prevents
the battery power from entering the driver through the DC output leads. Confirming backup power supply compatibility is the responsibility
of the luminaire manufacturer or installer. Please refer to the backup power supply manufacturer’s instructions for installation and further
product information.
Safety and Regulatory Notes
The following tables show the safety and regulatory certifications for the LMD125 LED module drivers.
LMD125 100 to 120 VAC
TRIAC Dimming
50/60-Hz Driver
Standard
J61347-1 (H20)
J61347-1 (H21)
Safety
LMD125 277 VAC
Non-dimming
60-Hz Driver
File Number
UL – Damp rated
UL/cUL recognized (UL8750)
Class 2 power supply
E333437
UL – Damp rated
5VA flame rating
Electromagnetic
compatibility
Regulatory
Environmental
FCC 47 CFR Part 15, Subpart B,
Class B and Industry Canada
ICES-003, Class B
File Number
CJP2012109004-0645
UL/cUL recognized (UL8750)
Class 2 power supply
Standard
E333437
5VA flame rating
R11CA40667-FCC
FCC 47 CFR Part 15, Subpart B,
Class B and Industry Canada ICES003, Class A
IEEE C.62.41-1991 Class A
(surge)
IEEE C.62.41-1991 Class A (surge)
NEMA 410
NEMA 410
RoHS
RoHS
R11CA41176-FCC
LMD125 230 VAC
TRIAC dimming
50/60-Hz Driver
Standard
File Number
EN 61347-1
EN 61347-2-13
Safety
CE SELV equivalent
RZCE2011-0452LVD
IP-20
IEC 62384
6JW2012-1878
CQC
V2012CQC004014-125388
EN 55015
Electromagnetic
compatibility
IEC 61000-3-2
IEC 61000-3-3
RZCE2011-0452EMC
IEC 61547
Environmental
RoHs
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
LMD125 LED Module Driver
Safety Certification
Together, the LMH2 light source combined with the LMD125 LED module driver is “suitable for damp locations; covered ceilings.” Final
luminaire designs should go through safety certification as required, which is the responsibility of the luminaire manufacturer.
Packaging
LMD125 100- to 120-V and 277-V LED module drivers are each packaged in boxes of 10, which are then combined in cartons of 10 boxes,
or 100 LMD125 100- to 120-V or 277-V drivers.
LMD125 230-V LED module drivers are packaged in boxes of 10, which are then combined in cartons of 12 boxes, or 120 LMD125 230-V
drivers.
Box and carton sizes are as follows.
Box of 10 LMD125 100- to 120-V or 277-V LED module drivers: 274 x 134 x 92 mm
Carton of 10 LMD125 100- to 120-V or 277-V driver boxes: 563 x 480 x 167 mm
Box of 10 LMD125 230-V LED module drivers: 215 x 176 x 133 mm
Carton of 12 LMD125 230-V driver boxes: 556 x 456 x 302 mm
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12