Cree® PLCC4 3 in 1 RGB SMD LED CLMUC-FKA PRODUCT DESCRIPTION FEATURES APPLICATIONS The CLMUC-FKA full-color RGB LED • Size (mm):1.5x 1.5 • Full-Color Video Screen offers a high-intensity light output and • Dominant Wavelength: Red (619 - 624nm) Green (520 - 535nm) Blue (460 - 475nm) • Decorative lighting a wide viewing angle. The compact 1.5mm x 1.5mm package allows for a very high resolution screen and is designed to work in a wide array of environmental conditions. Cree PLCC full-color RGB LEDs are suited for indoor video screen, decorative lighting and amusement applications. • Amusement • Luminous Intensity (mcd) Red (36- 71)@ 5mA Green (112 - 280)@ 5mA Blue (18 - 45)@ 5mA • Moisture Sensitivity Level: 5a • Lead-Free • RoHS Compliant WWW.CREE.COM/HB • Matte Surface Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp CLD-CT1295.006 PRODUCT FAMILY DATA SHEET Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R G B IF 25 13 13 mA IFP 70 50 50 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 60 49 49 mW Operation Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on RTHJA 460 560 540 °C/W Junction/solder point 1 chip on RTHJS 220 310 300 °C/W Forward Current Note 1 Peak Forward Current Note 2 Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Condition Symbol Dominant Wavelength IF = 5 mA Spectral bandwidth at 50% IREL max IF = 5 mA Forward Voltage IF = 5 mA Luminous Intensity IF = 5 mA Luminous Intensity(Reference) Reverse Current (max) Values Unit R G B λDOM 619~624 520~535 460~475 nm Δλ 24 38 28 nm VF(avg) 1.9 3.0 3.0 V VF(max) 2.4 3.7 3.7 V IV(min) 36 112 18 mcd IV(avg) 55 170 28 mcd IF = 20/10/10 mA IV(avg) 215 260 45 mcd VR = 5 V IR 10 10 10 μA Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA INTENSITY BIN LIMIT (IF = 5 mA) Blue Green Red Bin Code Min.(mcd) Max.(mcd) 140 L5 18 22 3p3n 20 25 Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) L8 36 45 C 112 3g3f 41 51 78 126 160 L9 45 56 D 140 180 L6 22 28 3e3d 51 64 9a 160 202 3m3k 25 32 L 56 71 E 180 224 L7 28 36 bc 202 252 3j3h 32 41 F 224 280 L8 36 45 Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (IF = 5 mA) Blue Green Red Bin Code Min.(nm) Max.(nm) Bin Code RB 619 624 G7 Bin Code Min.(nm) Max.(nm) Min.(nm) Max.(nm) 520 525 B3 460 465 527.5 B23 462.5 467.5 G23 522.5 G8 525 530 B4 465 470 G45 527.5 532.5 B45 467.5 472.5 G9 530 535 B5 470 475 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA ORDER CODE TABLE* Luminous Intensity (mcd) Kit Number Color Red 36 CLMUC-FKA-CL8LCFL5L8BB79353 Green 112 18 45 Blue CLMUC-FKA-CL81C1L51BB7C3C3 CLMUC-FKA-CL91D1L61BB7C3C3 Min. Dominant Wavelength (nm) Color Bin Min. (nm) 71 RB 280 G7 B3 RB Max. Package Color Bin Max. (nm) 619 RB 624 Reel 520 G9 535 Reel 460 B5 475 Reel 619 RB 624 Reel Red Any 1 Intensity bin from L8(36) - L(71) Green Any 1 Intensity bin from C(112) - F(280) Any 1 hue bin from G7(520) - G9(535) Reel Blue Any 1 Intensity bin from L5(18) - L8(45) Any 1 hue bin from B3(460) - B5(475) Reel Red Any 1 Intensity bin from L9(45) - L(71) Green Any 1 Intensity bin from D(140) - F(280) Any 1 hue bin from G7(520) - G9(535) Reel Blue Any 1 Intensity bin from L6(22) - L8(45) Any 1 hue bin from B3(460) - B5(475) Reel RB 619 RB 624 Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color- bin code will be orderable in certain quantities. 2. For example, any 1 intensity-bin from C - F means only 1 intensity-bin (C or 78 or D or 9a or E or bc or F) will be shipped by Cree. 3. For example, any 1 color-bin from G7 - G9 means only 1 color-bin (G7 or G23 or G8 or G45 or G9) will be shipped by Cree. 4. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 5. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA GRAPHS ℃ ℃ The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA MECHANICAL DIMENSIONS 1 4 2 3 All dimensions are in mm. 1 2 3 4 1 COMMON ANODE 2 CATHODE FOR Red 3 CATHODE FOR Green 4 CATHODE FOR Blue PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA REFLOW SOLDERING • • • • The CLMUC-FKA is rated as a MSL 5a product. After opening the sealed bag,the SMD LED must be stored under the condition<30ºC and<60%RH. Under these conditions,the SMD LEDs must be used (subject to reflow) within 24 hours after bag opening, and baking 24-hour/80ºC is required when exceeding 24 hours. Note that baking must only be done once. The temperature profile is as below. Document No.: COTCO-05-0057 Rev. NO. : 13 Temperature Melting-point Pre-heat Soak Reflow Cooling Time Use all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Solder = Lead-free Average ramp-up rate = 4ºC/s max. Use only with CLMUC-FKA Average ramp-up rate = 4ºC/s max Preheat temperature =Solder 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC Average ramp-up rate = 4ºC/s max Preheat time = 100s max. Preheat time = 100s max. Preheat temperature = 150ºC ~200ºC Ramp-down rate = 6ºC/s max. Ramp-down rate = 6ºC/s max. Peak temperature = 230ºC max. Peak temperature = 250ºC max. Peak temperature = 235ºC max Time within 5ºC of actual Peak Temperature = 10s max. Time within 5ºC of actual Peak Temperature = 10s max. Duration 183ºC is 80s max. Time within 5ºC of above actual Peak Temperature = 10s max Duration above 217ºC is 80s max. Preheat time = 120s max Ramp-down rate = 6ºC/s max Duration above 217ºC is 45s max Only use LP6-NPP1-01-N1 [13] Solder = Low Lead-free Average ramp-up rate = 3ºC/s max. Preheat temperature = 130ºC ~170ºC Preheat time = 120s max. Ramp-down rate = 6ºC/s max. Peak temperature = 213ºC max. Time within 3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7.0 9 2.6 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA PACKAGING • • • • • • The CLMUC-FKA is rated as a MSL 5a product. The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 12800 pcs per reel. id id o o v vC A AAA CCC l l ta ta e e CCoba oba ltlt Free Free Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 10