CLD-CT1320.001 PRODUCT FAMILY DATA SHEET Cree® PLCC6 3 in 1 SMD LED SLV6A-FKB PRODUCT DESCRIPTION FEATURES These SMD LEDs are packaged in an • Size (mm):5.5 x 5.5 industry standard PLCC6 package. • Dominant Wavelength: Red (619 - 624nm) Green (520 - 540nm) Blue (460 - 480nm) These high performance tricolor SMT LEDs are designed to work in a wide range of applications. A wide viewing angle and high brightness make these LEDs suitable for various full color applications. The encapsulation resin contains UV • Decorative lighting • Amusement • Luminous Intensity (mcd) Red (560 - 1120) Green (1120 - 2240) Blue (280 - 560) • Moisture Sensitivity Level: 5a inhibitors to minimize the effects of • Lead-Free long-term exposure to direct sunlight, • RoHS Compliant resulting in stable light output over APPLICATIONS the life of the LED. WWW.CREE.COM/HB * This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone. Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree PLCC6 3 in 1 SMD LED SLV6A-FKB ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R G B IF 50 35 35 mA IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 130 140 140 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on RTHJA 450 400 450 °C/W Junction/ambient 3 chips on RTHJA 650 580 680 °C/W Junction/solder point 1 chip on RTHJS 230 230 200 °C/W Junction/solder point 3 chips on RTHJS 230 230 200 °C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD Forward Current Note 1 Peak Forward Current Note 2 1000 V Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Condition Symbol Dominant Wavelength IF = 20 mA Spectral bandwidth at 50% IREL max IF = 20 mA Forward Voltage IF = 20 mA Luminous Intensity Reverse Current (max) IF = 20 mA VR = 5 V Values Unit R G B λDOM 619~624 520~540 460~480 nm Δλ 24 38 28 nm V VF(avg) 2.0 3.2 3.2 VF(max) 2.6 4.0 4.0 V IV(min) 560 1120 280 mcd IV(avg) 700 1600 400 mcd IR 10 10 10 μA Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC6 3 in 1 SMD LED SLV6A-FKB INTENSITY BIN LIMIT (IF = 20 mA) Red Green Blue Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) K 560 710 P 1120 1400 G 280 355 np 635 805 vw 1260 1600 fg 318 403 M 710 900 Q 1400 1800 H 355 450 qr 805 1010 xy 1600 2020 hj 403 505 N 900 1120 R 1800 2240 J 450 560 Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (IF = 20 mA) Red Green Blue Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) RB 619 624 G7 520 525 B3 460 465 G23 522.5 527.5 B23 462.5 467.5 G8 525 530 B4 465 470 G45 527.5 532.5 B45 467.5 472.5 G9 530 535 B5 470 475 G67 532.5 537.5 B67 472.5 477.5 Ga 535 540 B6 475 480 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC6 3 in 1 SMD LED SLV6A-FKB ORDER CODE TABLE* Luminous Intensity (mcd) Kit Number Color SLV6A-FKB-CKNPRGJBB7a363 SLV6A-FKB-CK1P1G1BB7R3R3 SLV6A-FKB-CM1Q1H1BB7R3R3 Color Bin Min. (nm) Color Bin Max. (nm) Package 1120 RB 619 RB 624 Reel 2240 G7 520 Ga 540 Reel B3 460 B6 480 Reel RB 619 RB 624 Reel Min. Max. Red 560 Green 1120 280 560 Blue Dominant Wavelength (nm) Red Any 1 Intensity bin from K(560) - N(1120) Green Any 1 Intensity bin from P(1120) - R(2240) Any 1 hue bin from G7(520) - Ga(540) Reel Blue Any 1 Intensity bin from G(280) - J(560) Any 1 hue bin from B3(460) - B6(480) Reel Red Any 1 Intensity bin from M(710) - N(1120) Green Any 1 Intensity bin from Q(1400) - R(2240) Any 1 hue bin from G7(520) - Ga(540) Reel Blue Any 1 Intensity bin from H(355) - J(560) Any 1 hue bin from B3(460) - B6(480) Reel RB 619 RB 624 Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color- bin code will be orderable in certain quantities. 2. For example, any 1 intensity-bin from K - N means only 1 intensity-bin (K or np or M or qr or N) will be shipped by Cree. 3. For example, any 1 color-bin from G7 - Ga means only 1 color-bin (G7 or G23 or G8 or G45 or G9 or G67 or Ga) will be shipped by Cree. 4. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 5. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC6 3 in 1 SMD LED SLV6A-FKB GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC6 3 in 1 SMD LED SLV6A-FKB GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC6 3 in 1 SMD LED SLV6A-FKB MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC6 3 in 1 SMD LED SLV6A-FKB KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8 Cree PLCC6 3 in 1 SMD LED SLV6A-FKB RELIABILITY Tests and Results Test Applicable Standards Test Condition Note Number of Damaged Temperature Cycle JEITA ED-4701 100 105 -40°C~25°C~100°C~25°C 30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/45 Thermal Shock MIL-STD-202G -40°C~100°C 30 mins, 30 mins 100 cycles 0/45 Moisture Resistance JEITA ED-4701 200 203 10 cycles 0/45 High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/45 Temperature Humidity Storage JEITA ED-4701 100 103 TA=60°C RH=90% 500 hrs 0/45 Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/45 High Temperature Life Test - TA=85°C IF=15 mA 1000 hrs 0/45 Life Test - TA=25°C IF: R=30mA G=35mA B=20mA 1000 hrs 0/45 High Humidity Heat Life Test - 60°C RH=90% IF=15 mA 500 hrs 0/45 Low Temperature Life Test - Ta=-40°C IF: R=30mA G=35mA B=20mA 500 hrs 0/45 Resistance to Soldering Heat(Reflow Soldering) JEITA ED-4701 300 301 Tsol=235°C,10sec (Pre treatment 30°C,70%,168hrs) 2 times 0/45 Vibration-variable Frequency MIL-STE-883 Method 2007 20G min, 20 to 2000Hz, 4cycles, 4mins, Each x,y,z / 0/45 Electrostatic Discharge Test AEC(Q101-001) Human body model 1000 V (Forward and reverse current conduct electricity each 1time) / 0/45 25°C~65°C~ 90%RH 24hrs/1cycle Failure Criteria Criteria for Judgment Item Symbol Test Condition Min. Max. Forward Voltage VF IF = 20 mA – Initial Data x 1.1 Reverse Current IR VR = 5 V - 10 μA Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 - Resistance to Soldering Heat - IF = 20 mA No dead lamps and visual damage Vibration-variable Frequency - IF = 20 mA No dead lamps and visual damage Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 9 Cree PLCC6 3 in 1 SMD LED SLV6A-FKB REFLOW SOLDERING • • • • The SLV6A-FKB is rated as a MSL 5a product. The recommended floor life out of bag is 24hrs. The best practices suggestion is to bake 24-hour/80ºC before use. The temperature profile is as below. Document No.: COTCO-05-0057 Rev. NO.: 13 Temperature Melting-point Pre-heat Soak Reflow Cooling Time Use all SMD besides LP6-NPP1-01-N1 Use only with SLV6A-FKB Soldering pad: Solder = Sn63-Pb37 Solder = Lead-free Solder Average ramp-up rate =4ºC/s max. Preheattemperature = 100ºC ~150ºC Average ramp-up rate =4ºC/s max 2.7 Preheattemperature = 150ºC ~200ºC Preheattime = 100s max. Preheattime = 100s max. Average ramp-up rate = 4ºC/s max Preheat temperature = 150ºC ~200ºC Preheat time = 120s max Peaktemperature 230ºC Peak temperature = 235ºC=max Ramp-down rate =6ºC/s max. max. Time Time within within5ºC 5ºC of actualofPeak Temperature = 10s max actual Peak Temperature Duration above 217ºC 45s max Duration aboveis183ºC is 80s Only use LP6-NPP1-01-N1 Peaktemperature = 250ºC max. = 10s max. max. Time within5ºC of actual Peak Temperature = 10s max. Duration above 217ºC is 80s max. 0.475 5.65 max. 1.7 1.3 1.7 Ramp-down rate =6ºC/s Ramp-down rate = 6ºC/s max [13] Solder = Low Lead-free 8.2 Average ramp-up rate =3ºC/s max. Preheattemperature = 130ºC ~170ºC Preheattime = 120s max. Ramp-down rate =6ºC/s max. Peaktemperature = 213ºC max. Time within3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad designfor heat dissipation (2-pin SMD LED): 7.0 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2.6 10 Cree PLCC6 3 in 1 SMD LED SLV6A-FKB PACKAGING • • • • • The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 3000 pcs per reel. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 11