CLD-CT1368.000 PRODUCT FAMILY DATA SHEET Cree® PLCC6 3 in 1 SMD LED CLMXB-FKA PRODUCT DESCRIPTION FEATURES APPLICATIONS This SMD LED features an IPx8 water • Size (mm):2.1x1.8x1.55 • Outdoor Full-Color Video Screen resistant rating in a PLCC package. • Dominant Wavelength: Red (619 - 624nm) Green (520 - 535nm) Blue (465 - 480nm) • Decorative lighting These high performance tricolor SMT LEDs are designed to work in a wide range of applications. A wide viewing angle and high brightness make these LEDs suitable for outdoor and full color video signage applications. The encapsulation resin contains UV • Luminous Intensity (mcd) Red (202 - 403) Green (403 - 805) Blue (71 - 140) • Water-Resistant (IPx8)* inhibitors to minimize the effects of • Moisture Sensitivity Level: 5a long-term exposure to direct • Lead-Free sunlight, resulting in stable light output over the life of the LED. This • Amusement • RoHS Compliant PLCC package has an increased package height to ease in the manufacturing process. WWW.CREE.COM/HB *:This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone. Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree PLCC6 3 in 1 SMD LED CLMXB-FKA ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R G B IF 50 35 35 mA IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 130 112 112 mW Operation Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient RTHJA 350 350 320 °C/W Junction/solder point RTHJS 200 180 160 °C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD Forward Current Note 1 Peak Forward Current Note 2 1000V Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Condition Symbol Dominant Wavelength IF = 15 mA(R) IF = 10 mA(G) IF = 10 mA(B) Spectral bandwidth at 50% IREL max IF = 15 mA(R) IF = 10 mA(G) IF = 10 mA(B) Forward Voltage IF = 15 mA(R) IF = 10 mA(G) IF = 10 mA(B) Luminous Intensity Reverse Current (max) Values Unit R G B λDOM 619~624 520~535 465~480 nm Δλ 24 38 28 nm VF(avg) 2.0 2.7 2.7 V VF(max) 2.6 3.2 3.2 V IF = 15 mA(R) IF = 10 mA(G) IF = 10 mA(B) IV(min) 202 403 71 mcd IV(avg) 275 565 103 mcd VR = 5 V IR 10 10 10 μA Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC6 3 in 1 SMD LED CLMXB-FKA INTENSITY BIN LIMIT (RED IF = 15 mA, GREEN IF = 10 mA, BLUE IF = 10 mA) Red Green Blue Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) bc 202 252 hj 403 505 A 71 90 F 224 280 J 450 560 3a4 81 90 de 252 318 km 505 635 B 90 112 G 280 355 K 560 710 56 101 126 fg 318 403 np 635 805 C 112 140 Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (RED IF = 15 mA, GREEN IF = 10 mA, BLUE IF = 10 mA) Blue Green Red Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) RB 619 624 G7 520 525 B4 465 470 G23 522.5 527.5 B45 467.5 472.5 G8 525 530 B5 470 475 G45 527.5 532.5 B67 472.5 477.5 G9 530 535 B6 475 480 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC6 3 in 1 SMD LED CLMXB-FKA ORDER CODE TABLE* Luminous Intensity (mcd) Kit Number CLMXB-FKA-CbcfghjnpACBB79463 CLMXB-FKA-Cbc1hj1A1BB7C4C3 Color Dominant Wavelength (nm) Package Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) Red 202 403 RB 619 RB 624 Reel Green 403 805 G7 520 G9 535 Reel Blue 71 140 B4 465 B6 480 Reel 619 RB Red Any 1 Intensity bin from bc(202) - fg(403) RB 624 Reel Green Any 1 Intensity bin from hj(403) - np(805) Any 1 hue Bin from G7(520) - G9(535) Reel Blue Any 1 Intensity bin from A(71) - C(140) Any 1 hue Bin from B4(465) - B6(480) Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-bin code will be orderable in certain quantities. For example, any 1 intensity bin from hj - np means only 1 intensity bin (hj or J or km or K or np) will be shipped by Cree. For example, any 1 color bin from G7 - G9 means only 1 color bin (G7 or G23 or G8 or G45 or G9) will be shipped by Cree. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC6 3 in 1 SMD LED CLMXB-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC6 3 in 1 SMD LED CLMXB-FKA GRAPHS ℃ ℃ The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT Cree PLCC6 3 in 1 SMD LED CLMXB-FKA MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC6 3 in 1 SMD LED CLMXB-FKA KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8 Cree PLCC6 3 in 1 SMD LED CLMXB-FKA REFLOW SOLDERING • • • • The CLMXB-FKA is rated as a MSL 5a product. The recommended floor life out of bag is 24hrs. The best practices suggestion is to bake 24-hour/80ºC before use. The temperature profile is as below. Document No.: COTCO-05-0057 Rev. NO.: 13 Temperature Melting-point Pre-heat Soak Reflow Cooling Time Use all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Use only with CLMXB-FKA Average ramp-up rate =4ºC/s Soldermax. Average ramp-up rate = 4ºC/s=max Preheattemperature 100ºC Solder = Lead-free Average ramp-up rate =4ºC/s max ~150ºC Preheattemperature = 150ºC ~200ºC Preheat temperature = = 100s 150ºCmax. ~200ºC Preheattime Preheattime = 100s max. Preheat time = 120s max Ramp-down rate =6ºC/s max. Ramp-down rate =6ºC/s max. Ramp-down rate = 6ºC/s max Peaktemperature = 230ºC max. Peaktemperature = 250ºC max. Time within5ºC of actual Peak Temperature = 10s max. Time within5ºC of actual Peak Temperature = 10s max. Duration above 183ºC is 80s max. Duration above 217ºC is 80s max. Peak temperature = 250ºC max Time within 5ºC of actual Peak Temperature = 10s max Duration above 217ºC is 60s max Only use LP6-NPP1-01-N1 [13] Solder = Low Lead-free Average ramp-up rate =3ºC/s max. Preheattemperature = 130ºC ~170ºC Preheattime = 120s max. Ramp-down rate =6ºC/s max. Peaktemperature = 213ºC max. Time within3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad designfor heat dissipation (2-pin SMD LED): 7.0 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2.6 9 Cree PLCC6 3 in 1 SMD LED CLMXB-FKA PACKAGING • • • • • The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT The reel pack is applied in SMD LED. Max 2500 pcs per reel. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 10