RoHS HFC03 High Frequency Chip Inductors 0.020±0.004 (0.5±0.10) 0.039±0.004 (1.0±0.10) 0.020±0.004 (0.51±0.10) Dimensions: Inches (mm) 0.010±0.004 (0.25±0.10) 0.016 (0.41) 0.016 (0.41) Features • 0402 EIA size for high board density applications. • Excellent Q and SRF characteristics for high frequency applications. • Cost effective monolithic construction Electrical Inductance range: 1.0nh to 100nh Tolerance: Available as noted. Insert letter for desired tolerance Test Frequency: Inductance and Q tested at 100MHz, 200mv with HP4291A Impedance Analyzer Inductance vs Freq. Characteristics measured on HP4291A Q vs Frequency Characteristics measured on HP4291A SRF measured on HPE4991 & HP87530 DCR measured on Chen Hwa CH502BC or HP4338B Mechanical Operating Temperature: -55ºC-125ºC Storage Temperature: Under 25ºC, Humidty 40% - 65% Solderability: 90% terminal coverage Test Condition: Pre heat:150ºC. 1min. Solder composition: Sn/Ag3.0/Cu.0.5 (Pb free) Solder temp: 245ºC±5ºC (pb Free) Immersion time: 4 ± 1 sec. Resistance to solder heat: No damage to part Test Condition Pre heat: 150ºC. 1min. Solder composition: Sn/Ag3.0/Cu.0.5 (Pb free) Solder temp: 260ºC±5ºC (pb Free) Immersion time: 10 ± 1 sec. Allied Part Number Inductance Tolerance (nh) (%) @100MHz SRF Typical (MHz) DCR Max. (Ω) IDC Max. (mA) HFC03-1N0S-RC 1.0 400 HFC03-1N5S-RC HFC03-1N8S-RC HFC03-2N0S-RC HFC03-2N2S-RC HFC03-2N4S-RC 8 8 8 8 8 8 8 0.07 1.2 1.5 1.8 2.0 2.2 2.4 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 10000 HFC03-1N2S-RC 10000 9000 8700 8100 8100 7700 0.09 0.10 0.10 0.10 0.12 0.15 400 400 400 400 400 400 HFC03-2N7S-RC HFC03-3N0S-RC HFC03-3N3_-RC HFC03-3N6_-RC HFC03-3N9_-RC HFC03-4N3_-RC HFC03-4N7_-RC HFC03-5N6_-RC HFC03-6N8_-RC HFC03-8N2_-RC HFC03-10N_-RC HFC03-12N_-RC 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.6 6.8 8.2 10 12 0.3nH 0.3nH 0.3nH,10 0.3nH,10 0.3nH,10 0.3nH,10 0.3nH,10 0.3nH,10 5,10 5,10 5,10 5,10 8 8 8 8 8 8 8 8 8 8 0.15 0.15 0.15 0.15 0.18 0.18 0.18 0.20 0.24 400 400 HFC03-15N_-RC 15 5,10 8 8 8 7700 6300 6300 6100 6100 6000 6000 5100 4550 4100 3900 HFC03-18N_-RC 18 5,10 8 3000 2800 2500 0.40 0.50 0.55 HFC03-22N_-RC HFC03-27N_-RC HFC03-33N_-RC HFC03-39N_-RC HFC03-47N_-RC HFC03-56N_-RC HFC03-68N_-RC HFC03-82N_-RC HFC03-100N_-RC 22 27 33 39 47 56 68 82 100 5,10 5,10 5,10 8 8 8 2200 2000 1800 0.70 0.80 0.90 300 5,10 5,10 5,10 5,10 5,10 5,10 8 8 8 1600 1400 1300 1100 1000 900 1.00 1.20 1.30 1.50 1.60 2.00 150 150 150 100 100 100 8 8 8 0.24 0.26 400 400 400 400 400 400 400 300 300 300 300 300 300 200 *Insert letter for desired tolerance. S=±0.3%, J=5%, K=10% All specifications subject to change without notice Physical Packaging: 10000 pieces per 7 inch reel. 949-356-1780 Q Min . ALLIED COMPONENTS INTERNATIONAL REVISED 05/27/2015 www.alliedcomponents.com